• PRODUCT AVAILABILITY: Did you know you can view a product's availability right on the product page? Simply enter the quantity you want to purchase and the current availability will appear below the item.

Porvair

UltraSeal™ Lite

Not yet rated

Finneran/Porvair Sciences Ultraseal LITE Promotion
Get a $50 Amazon Gift Card with the purchase of Ultraseal LITE!
Download the promotional redemption flyer on the "ADDITIONAL INFO" tab below.
Offer expires December 31, 2021

The Ultraseal™ Lite semi-automatic microplate heat sealer from Finneran Porvair processes deep well, shallow well, low profi le deep well, fi lter, and assay plates that conform to the ANSI/SLAS standard format. The Ultraseal™ Lite heat sealer operates using 400W of heating elements that ensure high integrity sealing of almost any type of microplate. With so much available power, sealing times for most polypropylene plates are less than three seconds each. Sealed plates are automatically ejected, from the unit, when the sealing cycle has completed. The compact footprint means that the UltrasealTM Lite will fi t just about anywhere - lab bench or inside a fume hood, if required.

Keypoints:

  • The Ultraseal™ Lite heat sealer has been designed to seal most types of microplates
  • The Ultraseal™ Lite utilizes various heat seal fi lms and foils to give either permanent or peelable seals for all common microplate material types (polypropylene, polystyrene, polyethylene)
  • Sealing times and temperatures are fully adjustable with the Ultraseal Lite, via the control touchscreen
  • Fully compatible with ANSI/SLAS standard plates and PCR, if full skirted
  • The UltrasealTM Lite has dual voltage capability, operating on either 110 or 220 VAC supplies without the need for a power transformer

The Ultraseal™ Lite System has been designed to efficiently seal plates of different heights and different plastics, using a variety of films, to give a seal with varying properties. The quality and strength of the seal, created between the sealing film and the microplate, will vary between different conditions. In general, increasing either the sealing temperature or duration of seal will provide a stronger, more complete seal. Note: Over-sealing on a regular basis is not recommended, as applying too much heat may cause excessive damage to the plate being sealed. This, in turn, will reduce the number of times a particular plate can be resealed. Therefore, a balance has to be achieved, that gives an acceptable seal while minimizing plate damage or distortion. Another optimization factor, to be taken into account, is the surface area of the plate. A plate with thin raised rims around each well will have a reduced surface area, compared to a plate with wide raised rims. This means that less heat is needed to seal the thin rim plate in comparison to the wide rim plate. The pressure that the heater plate exerts during sealing is pre-set and cannot be adjusted. Plates that do not have any raised rims are not recommended for heat-sealing.

Features and Benefits:

  • Desktop semi-automatic heat applied microplate sealing system
  • Seals SBS format microwell plates and tubes
  • Seals plates of any height from 9 - 48mm
  • Temperature range from ambient to 200ºC
  • Seal time from 0.1 - 9.9 seconds
  • Semi-automated slide operation
  • Combined temperature and seal time display
  • Light weight system, only 6kgs (14lbs)
  • 110V/220V 50/60 Hz compatible
  • No compressed air required
  • Power Supply: 110/220 VAC 50/60 Hz
  • Power Consumption: 600 Watts Nominal
  • Fuse Rating: 5 Amp anti-surge (T5AH 250V)
  • Internal Heaters: 4 x 100 Watts (Sealing Plate)
  • Dimensions: 181mm (7.125in) Width x 270mm (10.63in) Depth x 285mm (11.22in) Height
  • Minimum Plate Height: 9mm
  • Maximum Plate Height: 54mm
  • Maximum Sealing Temperature: 200°C
  • Protection: IP20
  • Cycle Time (approx.): 12 - 15 seconds (based on a 5 second seal)

Please Enter Your Order Info

Filter by:

  • Clear Filters
Product Detail
Thomas No.
21A00F740
Mfr. No.
250-10071
Description
Ultraseal Lite Adaptable Semi-Automatic Microplate Sealer

list price/quantity total
$0.00
Thomas No.
20A00D037
Mfr. No.
101028121074
Description
Skirtless PCR Plate Adapter, 96-Well

list price/quantity total
$0.00
Thomas No.
20A00D038
Mfr. No.
101028121073
Description
PCR Plate Adapter, 384-Well

list price/quantity total
$0.00
Thomas No.
20A00D039
Mfr. No.
15010035-101
Description
Spare plate weight to hold film down during sealing - for Standard & Rimless plates only

list price/quantity total
$0.00
Thomas No.
1169K33
Mfr. No.
500010
Description
Optic Clear 105um EVA/PE

list price/quantity total
$0.00
$0.00 (0 Items)

Write A Review





Please Log In

Don't have a web profile? Create one now.