Side Arm Flask

Compare Tool

Select up to 3 products

Side Arm Flask
1 - 32 of 39
Sort
View
Show
  • Disposable Side-arm Assembly

    Corning

    Disposable Side-Arm Assembly For 500ml disposable spinner flask,1/4 id c-flex, mpc, sterile, case of 2.

  • Double Sidearm Celstir® Spinner Flasks

    Wheaton

    …magnetic impeller at lower end, suspended above bottom of flask. Access to contents of assembled flasks provided by screw-cap side arms, attached at offset angle to allow insertion of pipet or probe without striking impeller shaft. Side arms are 9 mm i.d. and are suitable for decanting, filtered…

  • Celstir Assy, Retrofit Complete w/4 Sidearms 1000ml

    Wheaton

    …in the center of the flask. Units 500 mL and larger have a 45 mm sidearm to be used as an air vent, media inlet or outlet, inoculation port, pH probe inlet, or for other applications. Celstirs provide maximum surface interface between culture and flask atmosphere. All flasks are proportioned to…

  • PYREX® 2800mL Fernbach-Style Culture Flask with Baffles, Phenolic Screw Cap and…

    Corning

    …culture flasks have 100 mm wide (O.D.) threaded tops with PTFE-lined autoclavable polypropylene caps. They also have triple baffles located at the bottom edge of the flask to achieve maximal oxygen transfer to culture medium. These flasks have a large marking spot and top and bottom side arm

  • Scienceware® Filtering Flask with Side Arm

    Bel-Art Products

    These flasks, also called vacuum flasks, have a side-arm with a 45° downward angle to prevent tipping.   Reduce broken glassware with this flask constructed of FDA grade polypropylene Side Arm accepts flexible tubing from 3/8" to 1/2" I.D. 1000 ml capacity

  • PYREX® 2800mL Fernbach-Style Culture Flask with Phenolic Screw Cap and Top and…

    Corning

    …Fernbach-style culture flasks have 100 mm wide (O.D.) threaded tops with PTFE-lined autoclavable polypropylene caps. They also have triple baffles located at the bottom edge of the flask to achieve maximal oxygen transfer to culture medium. Flasks have top and bottom side arm tubulations with a 10…

  • KimCote® Filtering Flasks

    Kimble

    …or corrosive chemicals The plastic safety coating is steam-autoclavable The 125mL flask has a No. 5 stopper joint The 1, 2 and 4 liter flasks have a No. 8 stopper joint All flasks have a side arm for connection to 3/8” (6 mm) ID flexible tubing Manufactured from 33 expansion,…

  • XX1004705

    MilliporeSigma

    Replacement filter flask for use with the Millipore Fluids Contamination Analysis Kit (1211K07). Side arm connects to vacuum source with 3/8" I.D. hose Accepts No. 8 perforated stopper (1211G53)

  • Pycnometer, 10 mL

    Kimble

    …No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL size is for ASTM Standard D 153;…

  • Filtration Assemblies & Flask

    Kimble

    …the vacuum line or pump. ULTRA-WARE® Filtering Flask with Rubber Stopper Joint (1173F68) This flask is manufactured from heavy wall borosilicate glass to ensure the mechanical strength needed for vacuum filtration Side arm accepts 3/8” ID tubing for connection to vacuum…

  • Tissue Culture Flasks

    Techne (Bibby Scientific US)

    … Cap is plastic with a Teflon® liner and silicone rubber gasket which seals against the mouth of flask. Both liner and coupling are removable from cap. Side arms and ports have plastic screw caps with silicone rubber liners. 9382E50 through E65 have two side necks; 9382E70 has five side necks.

  • 47mm All-Glass Filtration Assemblies

    Advantec MFS

    …contamination of filtrate. The 300mL graduated funnel mounts on the 1L flask by way of a 40/35 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum…

  • PYREX® Distilling Flasks

    Corning

    … Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No. 4; 1,000 mL flask stopper No. 6.

  • Scienceware® C-Shaped Lead Rings

    Bel-Art Products

    …wide vessels by pulling on end to expand ring id Vikem ® vinyl coating protects glassware Rings fit neatly around the neck of filtering flasks with side-arm tubing connections. No need to disconnect the tubing and possibly compromise the process. The open ring, made of lead and covered…

  • Disposable Spinner Flasks

    Corning

    …glass spinner flasks for growth of suspension cell lines and any attachment-dependent cultures using microcarrier beads. Gamma-irradiated flasks meet USP XXIV: 71 Bacteriostasis, Fungistasis and Sterility Standards. No more concerns with detergent residues or contamination. Flasks cannot be…

  • XX1004744

    MilliporeSigma

    Filtering Flask with Sidearm. Side arm connects to vacuum source with 3/8" I.D. hose No. 8 perforated silicone stopper mounts in standard 4 L filtering flasks Made of Borosilicate glass

  • SYNTHWARE Round Bottom Four Neck Flasks with Threaded Side Arms

    Kemtech America

    SYNTHWARE round bottom, heavy wall, four neck flasks with threaded side arm. Standard taper outer joints on both the center neck and the vertical side necks. Threaded side arm is for insertion of plain thermometer or bleed tube having an O.D. between 5.0mm and 7.5mm. Supplied complete with Nylon®…

  • Spinner Flask

    Corning

    …support. The 1L spinner flask body is constructed of polystyrene, paddle and shaft from polypropylene and caps from high density polyethylene. All are ISO 10993 compliant materials Preassembled Flasks have one aseptic connector preassembled to one side arm. Opposite side arm has a flat cap. (Cat.…

  • Culture Flasks

    Electron Microscopy Sciences

    For all applications where gentle stirring is required, such as biological suspensions and micro-carrier cell cultures. The unique stirring action uses a flexible "PTFE" shaft driven through a fully encapsulated rare-earth magnet to give even and complete mixing throughout the liquid. The height of…

  • Nephelo Flask, Baffled, Screw Cap

    Ace Glass

    Nephelometer type culture flask with angled cuvette side arm and side clean-out port. Flasks have three outside bottom baffles to promote mixing and oxygen transfer to media. Flasks come with 18-415 side port phenolic cap and 38-430 phenolic top cap. The side arm fits all standard Nephelometers and…

  • Flask Shakers - SF1

    Techne (Bibby Scientific US)

    …feed-back control ensures a constant speed irrespective of load. Supplied with two side arms, eight clamps and Allen key. An optional extension kit is available, catalogue number SF1/2 which consists of two extension arms and four extra clamps. It increases the capacity to twelve bottles or flasks.

  • Nephelo Flask, No Baffles, Long, Plain Neck

    Ace Glass

    Nephelo style culture flask with 14mm od x 130mm side arm and long style, straight neck. Side arm designed to fit standard Nephelometers and spectrophotometers.

  • Nephelo Flask, No Baffles, Screw Cap

    Ace Glass

    Nephelo culture flask with side port and angled side arm cuvette for standard Nephelometers and spectrophotometers. Supplied with 38-430 phenolic top cap and 18-415 clean-out port cap.

  • SYNTHWARE Storage Flasks with High Vacuum Valve

    Kemtech America

    SYNTHWARE storage flask with high vacuum valve and side arm. Valve has a PTFE o-ring at the tip and PTFE wiper to protect the Viton o-ring on the shaft.

  • Trypsinizing Flask, Baffled, Sidearm, Screw Caps

    Ace Glass

    flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep, extra long side

  • Nephelo Flask, Baffled, Long, Plain Neck

    Ace Glass

    Triple baffled, Nephelometer, culture flask with three outside bottom baffles. Side cuvette arm fits standard Nephelometers and specrophotometers. The side baffles promote better mixing and oxygen transfer. The 25mm long style neck accomodates either plastic or stainless steel closures, see Ace 3917…

  • Variable and Fixed Speed Flask Shakers

    Boekel

    … Adjustable side arm clamps to accommodate up to 8 flasks (500mL or smaller) Load capacity of up to 10 lbs. with overload protection. Cold room compatible (4-25°C) UL, CSA, and CE Approved 2 year manufacturer warranty The Boekel Scientific Variable and Fixed Speed Flask

  • SYNTHWARE Modified Schlenk Flasks with Glass Stopcocks

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and 2mm bore glass stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.

  • SYNTHWARE Modified Schlenk Flasks with Teflon® Stopcocks

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 2mm bore PTFE stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.

  • SYNTHWARE Modified Schlenk Flasks with High Vacuum Valves

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 0-4 mm high vacuum valve in the side arm. The valve has a PTFE o-ring at the tip. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate…

  • WS180 Shaker

    Glas-Col

    …peptide synthesis flasks. It is also useful for shaking culture flasks and for agitating hard-to-dissolve solids such as polymers. The shaker simulates manual shaking by rotating through 180° of arc. It can shake two flasks simultaneously, either screw-cap top or side arm flasks. Its two large…

  • Adapter, Moisture Trap

    Ace Glass

    Unique adapter used in place of a Dean & Stark Moisture Test Receiver. Simply add a condenser to top standard taper outer joint, any graduated funnel from 125mL to 2000mL to bottom standard taper inner joint, attach sample flask to inner side arm joint and you have a moisture test receiver.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.