Our smallest mill - but still Wiley tough
• 1.6 inch diameter milling chamber - 1.7 cu. in.
• 1 to 25 gram sample volume
• Three speeds - 860, 1,700 and 3,700 rpm
• All steel construction
• Removable safety glass plate permits viewing of sample during milling and allows easy access to interior for cleaning
• As suggested by the U.S. Bureau of Plant Industry for milling of samples
With polished chamber 40 mm diameter x 22 mm deep, two stationary blades and a rotor with four cutting edges that revolve at high speed to produce a shearing action which minimizes loss of moisture from heat. Produces a 20-gram, 40-mesh sample of dried plant stem tissue in 15 to 20 minutes; a similar sample of extracted leaf tissue in 7 to 10 minutes; or 13 mm pieces of soybean stems in 5 to 7 minutes. Dried samples are generally used, but tobacco with 12% moisture has been milled satisfactorily.
Samples introduced through the hopper are swept around by rotor until cut to sufficient fineness to pass through sieve top of delivery tube which forms the bottom of the chamber. Six interchangeable delivery tubes of varying mesh are available. The 80 mesh size lacks ruggedness for general use but has been found convenient for plant tissue which has first passed the coarser screens.
Speeds of approximately 860, 1,700 and 3,700 rpm are available by changing the pulley position of belt. A screw top jar can be attached to the lower end of the delivery tube by means of an adapter. Samples can be stored in the same jar. Small samples are collected in a receiver 22 mm square x 19 mm deep.
STEEL WILEY MINI MILL
Mini-Mills are supplied with: 2.5" diameter stainless steel hopper with cover; wooden plunger; three delivery tubes with Monel metal sieve tops of 20, 40 and 60-mesh (other sizes available), each with receiver; two extra tool steel stationary blades; two Allen wrenches; extra 3383N55 glass front plate; 3383N65 Adapter; three 4 oz. screw cap glass jars; brush. Overall dimensions: 14" W x 11" D x 12" H (356 x 279 x 305 mm).
3383L10, L20 and L40 Mills have 1/4 hp (186.5 W) motor, 3383L30 Mill has 1/3 hp (248 W) motor.
|
Thomas P/N#
|
Manufacturer P/N#
|
Short Description
| Price
| QTY |
| 3383L10 | T4276-M |
WILEY MINI-MILL, 120V, 60 Hz
|
$3,745.00 | |
| 3383L20 | T4276-M02 |
WILEY MINI-MILL, 120V, 50/60 Hz
|
$4,000.00 | |
| 3383L30 | T4276-P |
WILEY MINI-MILL, 240V, 60 Hz
|
$3,950.00 | |
| 3383L40 | T4276-P10 |
WILEY MINI-MILL, 240V, 50 Hz
|
$4,075.00 | |
|
STAINLESS STEEL WILEY MINI MILL
Same as 3383L10, but with all metal parts in contact with sample including blades, rotor, chamber walls, delivery tubes and receivers of stainless steel. Welded seams of delivery tubes are sealed with epoxy cement.
Accessories
BLADE SET: 3383M05 set is of tool steel. 3383M10 set is of stainless steel.
HOPPER: Stainless steel, 2.5" dia. x 2.5" deep (64 x 64 mm), with cover.
WOODEN PLUNGER: For ramming sample materials into neck of hopper on Mini-Mills.
DELIVERY UNITS: Nickel plated with Monel gauze top. Complete units, including the removable 3383M95 receiver. Gauze tops are soldered to delivery tubes.
NICKEL-PLATED DELIVERY TUBES: Standalone delivery tubes. Receiver must be purchased separately.
STAINLESS STEEL DELIVERY TUBES: Standalone delivery tubes. Receiver must be purchased separately.
ROTORS: With four cutting edges; For replacement in Wiley Mini-Mills. 3383N45 rotor is for mills 3383L10 through L40. 3383N50 stainless steel rotor is for replacement only in stainless steel models 3383L60 and L70.
NOTE: The two rotors are different sizes and cannot be interchanged.
FRONT PLATE: Safety glass, 75 mm square, for all Wiley Mini-Mills.
BELT GUARD: Steel construction, completely encloses belt and pulleys. As supplied on all Wiley Mini-Mills after 1972. For mills prior to 1972 please ask about 0379W54.
BELT: V-shaped, 9.5 mm wide at top, 533 mm (21") outside circumference. For Wiley Mini-Mills.
ADAPTER: Plastic screw cap, size 58, with metal coupler of square cross-section to fit bottom of delivery tubes of Wiley Mini-Mills. Fits threaded containers such as 4 ounce (120 mL) 6180H19 jars, which are supplied with the mills. Broached cap to take removable coupler is listed as 3383N70.
