The ML500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. Polytetrafluoroethylene (PTFE) tubing for ML500 valves with M6 threads The dispense tubing is used to connect from…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

Product Dimensions (l x w x h) : 0.883x0.805x1.065in Isostatically molded beakers from virgin Polytetrafluoroethylene and machine finished to give a smooth surface for ease of cleaning and eliminate contamination. 20 mm diameter beaker supplied with pouring spout. Virtually immune to…

Stoppers are used with laboratory glassware such as flasks and separatory funnels. PTFE has excellent chemical resistance and resists freezing in ground glass joints Remove the colored polyethylene handle from the PTFE stopper before cleaning or exposing to temperatures above 80 °C …

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

PTFE Beakers feature the unique combination of a pure PTFE body with a specially formulated stabilized PTFE Carbon base as a single molding to give Totally inert, pure PTFE inner surface Heatable to 270°C without distortion Improved heat transfer

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

Beaker Covers, PTFE

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

Chemically inert PTFE beakers can withstand temperatures up to 260°C.

As supplied with 1983J70 and J76 Kimble Economy Burets Plug bore two mm Also for replacement on Kimble 17800 and 17810 series Chromatography Columns and Kimble 29050-H and 29060-H series Separatory Funnels.

Complete with nut, O-ring, washer For replacement in glassware originally supplied with Teflon straight bore plugs

The ML500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. The 12 gauge tubing has a larger inner diameter and should be used with syringe sizes larger than 2.5 mL or with viscous…

These chemically resistant PYREX® keyhole stoppers are made from polytetrafluoroethylene (PTFE) and conform to Standard Taper stopper dimensions. The color-coded keys make sorting and selecting the correct size much faster and easier. These stoppers may be used in place of conventional glass…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

Chemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…

With nut, washer and O-ring Two mm bore

Isostatically molded beaker covers (watch glass) from virgin polytetrafluoroethylene and machine finished to give a smooth  surface for ease of cleaning and to eliminate contamination. Supplied with pouring spout. Virtually immune to chemical attack, only attacked by some fluorine containing…

Tall form with pouring spout Pure polytetrafluoroethylene, heavy wall, smooth internal finish Inert and usable to 280°C

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

With KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…

The Hamilton tubing assembly is made of CTFE material which is more durable and highly chemical resistant. With inner diameter of 0.043 Inch and outer diameter of 0.067 Inch, this assembly enables to quickly connect and disconnect different components in the laboratory.

The Hamilton tubing assembly is made of CTFE material which is more durable and highly chemical resistant. With inner diameter of 0.125 Inch and outer diameter of 0.155 Inch, this assembly enables to quickly connect and disconnect different components in the laboratory.

The Hamilton tubing assembly is made of PTFE material which is more durable and highly chemical resistant. With inner diameter of 0.063 Inch and outer diameter of 0.123 Inch, this No Hub threaded assembly enables to quickly connect and disconnect different components in the laboratory.