Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

Match Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …

Polypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)

Polypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers

Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

Individual, sterile loops and needles Eliminate waste Disposable 1 µL and 10 µL loops Color coded Certified to be free of RNase, DNase, DNA, pyrogens and PCR inhibitors The Astral Inoculation System eliminates the metal or wire loop flaming step and the hazards…

Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…

KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits – allowing for maximum productivity and safety for you and your employees. KleenGuard™ A20 Breathable Particle Protection Aprons help protect against hazardous and non-hazardous dust. These protective…

Superior sealing with Patented Dual α Ring Seal technology, patent number D869275 Manufactured with ultra pure gasket seal materials in caps and medical grade ultra clear USP class 6 plastics for Tubes Double Start Threads provides greater thread contact area for superior strength…

50 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport.  …

KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits – allowing for maximum productivity and safety for you and your employees. KleenGuard™ A20 Breathable Particle Protection Aprons help protect against hazardous and non-hazardous dust. These protective…

Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. The rack can sink in a water bath and remain stable even in agitated water. Each rack features end plates for labeling as well as numbered and lettered rows for tube identification.…

KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits – allowing for maximum productivity and safety for you and your employees. Offering your team comfortable protective clothing is a must, and KleenGuard™ A40 Liquid and Particle Protection Aprons are a…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Round-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…

Test Tubes ‘Hang in There’ in Any Position, Even Inverted! Retainer fingers hold tubes firmly in the rack plates with no fear of dislodging, making them perfect for both decanting and water bath work.  • Fingers allow simultaneous decanting to save valuable…

Minimizing waste, the Scienceware® 12 Channel Reagent Reservoir's V-shaped wells allow complete sample withdrawal. It's chemical-resistant polypropylene construction can be used with single, 8 and 12 channel pipettors. A wide profile provides added stability and measures 5" L x…

Hold Fragile Spectrophotometer Cuvettes in Complete Safety These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage. Only the corners of the cuvettes touch the racks Accommodate 12 cuvettes of 10mm light path Will not…

30 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport.  …

Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.

Contec's PROSAT ® Sterile ™ Polypropylene wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT…

Hold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…