Compare Tool

Select up to 3 products

All Products

Polyethylene

1 - 32 of 32
Sort
View
Show
  • Thomas Clear Plastic Lab Wrap

    Thomas®

    100% polyethylene wrap Low tangle High cling Ultra-clean film Metal tear-off bar makes it easy to cut the exact size you need Flap prevents roll from leaving box Wrap is 12” wide by 100 feet in length

  • Write-On Blender Bags

    Nasco

    55 oz. (1,627 ml) capacity 4.0 mil (.102 mm) thick 7-1/2" W x 12" L (19 x 30 cm) The white, write-on strip makes sample identification easier and more convenient. It’s easy to write on this white strip using an ordinary ballpoint pen, pencil, or felt-tip marker. The paper-like finish…

  • HDPE Stopper No 13

    Corning

    These blue and white No. 13 PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental…

  • Thomas Spilltray And Drying Rack

    Thomas®

    Eliminates spills Easy to clean Unit is dishwasher safe Plastic grid cushions and protects against breakage and scratches. Grid cuts drying time in half by promoting air circulation. Rack measures 16 1/2” x 13” x 5/8” and weighs 1 lb.

  • Whirl-Pak Speci-Sponge Bags

    Nasco

    For environmental surface sampling Options save time and money The general-purpose buffer has a pH of 7.2 ± .2 and optimizes the stability of growth of most organisms. With or without sterile glove.

  • Bag Whirlpak Clear 7oz

    Nasco

    7 oz./207 ml capacity 3-3/4” W x 7” L (9.5 cm x 18 cm) 3.0 mil, .076mm thick Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180°…

  • Cap, Cellstack, 33mm Vent, 0.2Micron, Orange, S, Ind

    Corning

    33mm threaded cap Vented cap has 0.2um pore nonwettable (hydrophobic) membrane sealed directly to the cap Allows gas exchange while minimizing the risk of contamination Sterilized by gamma irradiation

  • HDPE Stopper No 9 Cs 6

    Corning

    These blue and white No. 9 PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects t

  • HDPE Stopper No 22

    Corning

    These blue and white No. 22 PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental…

  • Snap Cap No. 4 Cs 6

    Kimble

    Snap Caps are designed for KIMAX volumetric flasks Yellow polyethylene Caps may not be usable with items lacking necks specially tooled to proper diameters and contours Fits 100mL volumetric flasks

  • HDPE Stopper No 16

    Corning

    These blue and white No. 16 PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects the neck in the event of accidental…

  • 52-oz. 1 538-ml Round Bottom Blender Bag Box Of 500

    Nasco

    These bags feature a special round bottom seal designed to minimize sample fragments from getting caught in the corners of the bag during blending. This bag is specially designed for use with homogenizer blenders. It is made from extra-heavy polyethylene and has special features to make sample…

  • Scienceware® Gas Washing Bottle with Fritware® Dispersion Disc

    Bel-Art Products

    Graduated 250ml polypropylene cylinder with a stable extended base for use in precipitating elements from gas. Gas is dispersed through a removable fitting that has a coarse grade porosity, polyethylene dispersion disc Silicone stopper holds 6.3mm (1/4") O.D. tubes for entrance and…

  • Stopper No. 9 Cs 6

    Kimble

  • Snap Cap 250 ml

    Corning

    These blue No. 250 PYREX® polyethylene caps provide an economical closure for some volumetric flasks (See Nos. 5580, 5581 and 5600).

  • Tubing Pe190 36In Sterile 12 Pk

    BD

  • 11 mm Snap Cap, PE Clear, TFE Liner

    Wheaton

  • Stopper No. 22 Cs 6

    Kimble

  • Stopper No. 27 Cs 6

    Kimble

  • Stopper No. 13 Cs 6

    Kimble

    Yellow and blue closed-bottom linear high-density polyethylene stopper to fit in the ground glass neck Enlarged flange on stopper is designed to protect the glass if tipped over Size: 13 Case of 6

  • Stopper No. 19 Cs 6

    Kimble

    Replacement part for items that are ground to stopper dimensions. Yellow and blue stopper has a closed bottom. The enlarged flange is designed to protect the neck if the glass object is tipped over.

  • Snap Cap No. 5 Cs 6

    Kimble

    Replacement snap caps for Class A serialized and certified volumetric flasks. Yellow polyethylene construction Fits Kimble® series 28000, 28008, 28010, 28010K and 28015 Fits flask size 200, 250, 500 mL Case of 6

  • Stopper No. 16 Cs 6

    Kimble

    Replacement part for items that are ground to stopper dimensions. Yellow and blue stopper has a closed bottom. The enlarged flange is designed to protect the neck if the glass object is tipped over.

  • Scienceware® Small Bottle, PE

    Bel-Art Products

    This small polyethylene bottle with screw cap is ideal for storing powders or liquids. The 13/425 black phenolic cap forms an extremely tight seal and provides a good chemical barrier. 22mm dia x 41mm H (0.86 x 1.61").

  • Thomas PP Narrow Mouth Bottles

    Thomas®

    CLEARANCE SALE! 50% OFF! Original Price: $8.11 Excellent chemical resistance Autoclavable Leakproof Translucent Polypropylene screw closures Thomas polypropylene (PP) narrow mouth bottles are ideal for lab applications requiring excellent chemical resistance.…

  • Snap Cap No. 6 Cs 6

    Kimble

    Snap Caps are designed for KIMAX volumetric flasks Yellow polyethylene Caps may not be usable with items lacking necks specially tooled to proper diameters and contours Fits 1000mL volumetric flasks

  • Snap Cap No. 2 Cs 6

    Kimble

  • HDPE Stopper No 32

    Corning

    These blue and white No. 32 PYREX® stoppers are made from linear high-density polyethylene and have closed bottoms to conform to Standard Taper stopper dimensions. The three rings on the plug provide an efficient seal. This improved design fully protects

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.