Glass

Compare Tool

Select up to 3 products

1 - 32 of 419
Sort
View
Show
  • Pycnometer, 10 mL

    Kimble

    Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL…

  • PYREX® Oil Centrifuge Tube

    Corning

    Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

  • PYREX® 15mL Low Form Gooch Crucible with 20mm Diameter Medium Porosity Fritted…

    Corning

    These 15mL PYREX® low form crucibles have 20mm diameter medium porosity (10 to 15µm) fritted discs. They are particularly adapted to analytical work where precipitates are dried to constant weight at 110°C. They are also suitable for higher temperatures, in which case it is advisable…

  • Tube 100 ml

    Corning

    These 100mL PYREX® round bottom centrifuge tubes are useful for the handling of sputum specimens. Digestion, shaking, neutralizing and centrifuging can be performed in one container. They are also useful for other clinical and microbiological tests. Screw caps resist the effects of temperature…

  • Glass Sample Cell

    Hach

    For use with colorimeters and spectrophotometers. Pack of six includes caps.

  • Hubbard-Carmick Specific Gravity Bottle, 25 mL, 24 / 12

    Corning

    For use with viscous fluids, semi-solid bitumens, emulsions, etc. For ASTM Standards D 70, D 115, D 234, and D 1963; also for AASHTO standards T-43, T-151, and M-125; and ANSI Methods A37.71 and K34.1 Standard taper 24/12 solid stopper, concave on the under side, with central opening 1.6 mm bore …

  • PYREX® Weathering Test Centrifuge Tubes

    Corning

    Graduated upward to 0.5 mL in divisions of 0.05 mL , from 0.5mL to 3mL in 0.1 mL divisions, from 3 mL to 5 mL in 0.5 mL divisions and from 5 mL to 100 mL in 1 mL divisions. Made with a 3 mm vent hole located 180° from the front of the tube. Tubes are for testing propane, butane and Isobutane mixtures.

  • Tube Nessler Low Matchx6 50ml

    Kimble

    These Nessler tubes are ideal for color comparison. Shadowless bottom of each tube transmits undistorted light Rings and legend are durable white ceramic enamel 45310A series is supplied in matched sets of 6 Graduated ring scale of any of the six tubes will not vary by more than 3…

  • Magnetic Filter Funnel, 300 mL

    Hach

    Clear polysulfone funnel with imprinted graduations. Magnetic coupling of funnel to stem for fast filter changes. Used with 47 mm membrane filters for coliform testing and prefiltration of many fluids. Fits standard manifold systems with #8 rubber stopper connections. Capacity 300 mL (10 oz).…

  • Centrifuge Tube 15 ml

    Corning

    These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI threaded…

  • Tube, Centrifuge, Oil, 100ml

    Kimble

    KIMAX tube used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating…

  • Buret 10 ml

    Corning

    These 10mL Class A PYREX® microburets are designed for precise analytical methods in microchemistry. Precision bore tubing throughout the body assures accuracy between any two points. Funnel top facilitates addition of reagents by pouring, or by suction from below through a rubber-stoppered…

  • Tube Test Grad 10ml

    Kimble

    Reinforced bead top Scale is a permanent brown stain Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • E-C Vials w / Rubber Lined Caps, Clear, 4 ml

    Wheaton

    These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

  • Tube Culture 25 X 200mm Cs192

    Kimble

    Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

  • Gas Oil Distillation Cylinder

    Corning

    These 200mL PYREX® graduated cylinders are calibrated "to contain" (TC) in percent. 200mL is equal to 100% in 1% divisions. The scale is in durable white enamel. This cylinder may be used to measure the distillate in ASTM method D-86 "Distillation of Gas Oil and Similar…

  • E-C Vials w / Rubber Lined Caps, Clear, 24 ml

    Wheaton

    These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

  • Angled Three Neck Round Bottom Flask

    Kimble

    Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Stopperless BOD Bottles

    Wheaton

    Marking spot Borosilicate glass 300 mL capacity BOD Bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by…

  • Cent Tube Disp, Screw Cap Gpi 24-400, 50ml

    Corning

    These disposable 50mL Pyrex® glass centrifuge tubes are manufactured from Type I borosilicate glass and have a GPI 24-400 thread. They are supplied without caps. The tubes are designed to withstand centrifugation up to 3,000 RCF and are packed in convenie

  • Tube Culture Graduated 10ml

    Kimble

    KIMAX® culture tube intended primarily for use in the testing of milk for the presence of bacteria by the methylene blue reductase test. Smooth, fire-polished rim Graduation line is located at the 10 mL level Durable white ceramic enamel marking spot Described in APHA Standard…

  • Vial 40ml od28 Cs72

    Kimble

    Manufactured from clear KG-33, borosilicate glass Open top black polypropylene closures attached Closures supplied with PTFE-faced silicone septa

  • Disposable Bacteriological Pipets

    Kimble

    Sterile Disposable Plugged Calibrated “to deliver” Wide tip glass pipets are sterile, disposable, plugged and suitable for transferring viscous or suspended liquids. Pipets are multi-packed in plastic bags (200 pieces each) to protect against contamination.

  • E-C Vials w / Rubber Lined Caps, Clear, 12 ml

    Wheaton

    These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

  • Bottle Reservoir 2L

    Kimble

    KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…

  • Flask Boiling Flat Bottom 500ml

    Kimble

    KIMAX® boiling flask with a short Standard Taper joint neck. Designed from ASTM Specification E1403, Type I, Class IV requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • PYREX Baffled Culture Flask

    Corning

    Screw cap This wide mouth flask is designed for culturing organisms requiring a large surface area to volume ratio. Triple baffled on the bottom outside edges to achieve maximal oxygen transfer to culture medium. Supplied with GL45 orange polypropylene cap.

  • Vacules w / Screw Caps 5ml

    Wheaton

    External thread Free standing Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable borosilicate glass (meets ASTM Type I Class A and USP Type I standards.)

  • KIMAX Dissolution Flask

    Kimble

    Capacity 1000 mL, 108 mm o.d. x 165 mm high Precision-formed borosilicate glass flask for determining the relative dissolution characteristics of drugs in capsule or tablet form. Flasks are suitable for use with most existing equipment.

  • Flask Distill Engler 125ml

    Kimble

    KIMAX distilling flask. The sidearm tube is sealed at an angle of 75 º from the neck and is 137 ± 3 mm from the bottom of the flask. It is designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802.

  • PYREX® Folin-Wu Digestion Tubes

    Corning

    Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50 mL .

  • PYREX Micro Tubes (Corning 8061)

    Corning

    Graduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.