Wilmad LabGlass

Compare Tool

Select up to 3 products

All Products

Wilmad LabGlass

1 - 32 of 199
Sort
View
Show
  • Automatic Zero Reservoir Burets

    Wilmad LabGlass

    For student use or industrial test methods requiring medium accuracy Graduated in 0.1 mL; central filling tube zeroes buret as excess titrant drains back into reservoir Self-standing, supported by filling tube which passes through rubber stopper of reservoir bottle Rubber bulb with finger-stop…

  • 5mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Economy Single Tube Solvent Jet Washer/Cleaner

    Wilmad LabGlass

    After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks…

  • Pyrex® NMR Capillary Tubes

    Wilmad LabGlass

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • Capillary Tip Centrifuge Tubes

    Wilmad LabGlass

    This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

  • Buchner Filter Funnels

    Wilmad LabGlass

    WUsed in applications where filter paper would be attacked by the material being filtered, these borosilicate glass Buchner filter funnels with sealed-in fritted glass discs are available in Coarse(C), Medium(M), or Fine(F) porosities.

  • Gay-Lussac Adjusted Specific Gravity Bottles

    Wilmad LabGlass

    These borosilicate glass specific gravity bottles are accurately adjusted at 20°C to determine the density of liquid samples. While the joints have Standard Taper dimensions, the capillary stoppers are not interchangeable since the final adjustment for volume is made on the stopper. Each bottle…

  • Polished Glass Stirrer Shafts

    Wilmad LabGlass

    Precision ground and polished, these borosilicate glass stirrer shafts have a 10mm O.D. For use with LG-9475T bearing with PTFE bearing surface, or other bearings with a PTFE interface with the same bore. Features a side button at bottom for attachment of any of the stirrer/stirring blades (LG-9505…

  • Hubbard Specific Gravity Bottle

    Wilmad LabGlass

    This borosilicate glass specific gravity bottle is used in standard test methods for specific gravity of a variety of semi solid materials and emulsions, such as asphalt cements, road tars, road oils, and soft tar pitches. The solid Standard Taper stopper has a hole approximately 1.6mm in diameter…

  • Two-Piece Vacuum Traps with Hose Connection

    Wilmad LabGlass

    These borosilicate glass vacuum traps have a Standard Taper joint to ease disassembly and allow cleaning/draining. The sidearm 3/8" hose connectors are 180° apart with a bent top stem and provide an easy connection when using rubber tubing. See LG-11020 for body only.

  • Schlenk Vacuum Sample Tubes

    Wilmad LabGlass

    These borosilicate glass Schlenk sample tubes incorporate a grease-free high vacuum 0-4mm valve and are suited for pressure/vacuum applications. Ideal for reaction and storage of air-sensitive compounds. Sidearm can be connected to inert atmosphere/vacuum source or a manifold.

  • Soap Film Flowmeters

    Wilmad LabGlass

    Made of borosilicate glass, these soap film bubble flowmeters are used in routine analytical laboratory gas chromatography to measure flow rate of the carrier gas. A soap bubble, formed in the bottom of the graduated tube, is pushed upward by gas from exit end of the chromatograph. Flow rate is…

  • 5mm O.D. Thin Walled Suprasil® NMR Tubes

    Wilmad LabGlass

    Wilmad Precision NMR Suprasil® (Synthetic Quartz) Tubes are manufactured from high purity synthetic fused silica materials with <0.005ppm Fe2O3 and outstanding optical characteristics in the deep UV to the near IR. Transmission rate from 190nm to 2600nm is well over 95% (10mm…

  • Globe Style Separation Funnels with Glass Stopper and Stopcock

    Wilmad LabGlass

    This borosilicate glass pear-shaped separatory funnel is supplied with a Standard Taper glass stopper and a Standard Taper glass stopcock.

  • X-Band Economy Brand EPR Quartz Tubes

    Wilmad LabGlass

    Wilmad X-Band Economy Brand EPR Quartz Tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination Comes with a cap

  • 5mm O.D. Thin Walled Economy NMR Tubes

    Wilmad LabGlass

    Designed for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA…

  • Filterware™ Microfiltration Glassware

    Wilmad LabGlass

    These filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit.…

  • Chromatography TLC Sprayers

    Wilmad LabGlass

    When using thin layer or paper chromatography (TLC), these borosilicate glass atomizers are used for spraying chromogenic reagents. Complete unit consists of spray head, flask, and LG-1004 clamp. The air inlet tube has an opening to release pressure and stop spraying. All joints are Standard Taper 24/40.

  • Jacketed Beakers

    Wilmad LabGlass

    Made of borosilicate glass, these laboratory beakers are fully jacketed to allow temperature control over a wide range. They are similar to a standard Griffin Beaker, but do not have a pouring spout.

  • X-Band Precision Brand EPR Quartz Tubes

    Wilmad LabGlass

    Wilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…

  • Laboratory Grade Cylindrical Dewar Flasks

    Wilmad LabGlass

    For routine use. Furnished silvered, evacuated and with aluminum base. Not for transportation of Liquid Nitrogen. Properties Capacity mL: 1000 Inside Diameter Inches: 2-11/16 Inside Depth Inches: 11-7/8

  • Adsorption Columns

    Wilmad LabGlass

    These borosilicate glass indicator adsorption columns are used to determine saturates, nonaromatic olefins and aromatics in petroleum fractions that distill below 315°C as specified in ASTM Method D-1319. The standard flourescent indicator column is drawn to a fine point for retaining silica…

  • Long Oil Centrifuge Tube, TC

    Wilmad LabGlass

    Calibrated "to contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D…

  • NMR/EPR Tube Caps

    Wilmad LabGlass

    Our PTFE NMR/EPR Tube Caps are machined to exact specifications with smaller gyroradius and more homogeneous mass distribution than disposable caps providing better spinning stability. They are recommended for experiments at high - ultra high field and those using Chloroform as the reference…

  • Capillary Tip Centrifuge Tube

    Wilmad LabGlass

    Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.

  • Cylindrical Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.

  • Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    These borosilicate glass cylindrical reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing…

  • Stainless Steel McCarter Reaction Clamps

    Wilmad LabGlass

    Used to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…

  • Jacketed Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    These jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…

  • Volumetric Color Coded Class A Pipettes

    Wilmad LabGlass

    Calibrated "to deliver" (TD) at 20°C, these borosilicate glass, color coded pipettes are fabricated to meet the requirements for accuracy, appearance, glass quality and calibration line accuracy. Reference: Volumetric, Class A ASTM E-969

  • Multi-Tube Jet Solvent NMR/EPR Tube Washer and Dryer

    Wilmad LabGlass

    Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is…

  • Soxhlet Extraction Apparatus

    Wilmad LabGlass

    Used for the continuous extraction of solids with a suitable solvent. Units are supplied complete with flat bottom boiling flask, Soxhlet extractor and Allihn condenser. The extractor capacity shown is the solvent volume held in the extractor to the top of the siphon tube. The siphon tube is…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.