Oakton
-
The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature. Combine…
-
Two-Speed Hygrothermograph
OaktonSpring wound- no batteries required! Made of corrosion- resistant acrylic for indoor or sheltered outdoor use. Spring winding keeps chart running for eight days. Even when the motor begins to run down, a steady chart speed is maintained. Includes one 1-day gear and one 7-day gear, two…
-
High-Temperature Probe
OaktonThe Oakton type K 20 gauge probe features fiberglass insulated wire construction making it ideal for high-temperature measurements. High-Temperature Fiberglass Insulated Wire Used for High-Temperature Measurements Response Time: 0.75 seconds or greater All insulated-wire probes include straight…
-
All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.
-
Digital temperature display with 0.1° resolution Barometer is encased in corrosion-resistant plastic housing. Includes wall mounting bracket, one AA battery, and instructions. Dual scale reads barometric pressure in mbar and inches Hg Switchable °C/°F readout
-
Aneroid Barometers
OaktonOur high-quality barometers are ideal for measuring impending weather changes These barometers accurately measure atmospheric pressure from sea level up to 2000 feet. They also simultaneously monitor temperature with a built-in glass thermometer. Bimetallic temperature compensation preserves…
-
This small-diameter, refillable pH electrode is ideal for measurements in test tubes, NMR tubes, and other applications where space is limited. Double junction; epoxy-body Features a 9 mm diameter, which is ideal for test tube applications Range: pH 0 to 12 Connection: BNC …
-
The Oakton Digi-Sense down-well pH/CON/temp electrode with 25 Feet cable, is suitable for use with Oakton meters and pocket testers. Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample Choose from a variety of accessories…
-
For pHtestr 30 purchased before Oct. 2019 Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers. …
-
TC, Probe, Hvy. Duty, 12" T
OaktonThese thermocouple probes were designed to measure any general-purpose or liquid immersion application. All thermocouple probes include a 5-ft PVC coiled cord with strain relief that protects from repeated flexing and tugging. Ergonomic, easy-grip 5"L glass-filled nylon handle (unless noted…
-
All-in-One double junction electrode features a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). For most applications, including dirty water, heavy metals and organics applications. Each electrode is 12 mm diameter with a 3 foot cable Each…
-
Get quick and reliable temperature readings everywhere from the lab to production floor Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of…
-
Safely and easily locate hot and cold spots, preventing problems and saving costs Ergonomic pistol-grip infrared (IR) thermometers provide the precision you need for quick and easy temperature measurements. Noncontact meters safely measure the surface temperature of objects without physically…
-
CON 2700 Benchtop Meter
OaktonMeasure conductivity, total dissolved solids (TDS), salinity, resistivity, and temperature Brilliant backlit display with dynamic stability indication Up to 500 point memory with date-time stamp for GLP Output data to printer or PC Accepts either 2-cell or 4-cell electrodes Features…
-
Waterproof pH Testers
OaktonFeatures three-point push button calibration High accuracy ATC Self-diagnostic messaging Non-volatile memory Double-junction polymer sensor Waterproof pHTestr 30 is great for outdoor applications such as taking pH measurements in lakes and streams. Designed to float in…
-
Extremely versatile—the meter automatically recognizes which sensors you plug in so you can easily switch parameters whenever you want Select a meter with the number of channels you need (1, 2, or 3) and the sensors for the parameters you are measuring (pH, conductivity, or DO) Eliminate…
-
Acorn® Temp 5 Meters
OaktonOakton® WD-35626-50 Replacement Thermistor Probe for use with WD-35626-10 Acorn™ Temp 5 Thermistor Thermometer, Material: Stainless Steel, Cable Length: 1-Meter 4.5 inch 316SS thermistor probe With integral handle 3' cable
-
pH Buffer Solutions
OaktonChoose from economical solution bottles or individually sealed pH buffer pouches. NIST traceable materials Labeled with pH vs. temperature tables for accurate calibration All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to…
-
Conductivity Probe
OaktonA variety of conductivity probes for any application. Choose a cell constant compatible with your application. Varying cable lengths available. Keep your multiparameter meters up and running with replacement conductivity probes. Update, upgrade, or replace to get the best out of your Oakton…
-
Get quick and reliable temperature readings everywhere from the lab to production floor Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of…
-
Thermocouple Probe
OaktonThermocouple probes operate on the principle that an electromagnetic force (emf) is generated when heat is applied to the junction of two dissimilar metals (sending junctions). At the other end of the wires, usually as part of the input instrument, is another junction called the reference junction.…
-
Extremely versatile—the meter automatically recognizes which sensors you plug in so you can easily switch parameters whenever you want Select a meter with the number of channels you need (1, 2, or 3) and the sensors for the parameters you are measuring (pH, conductivity, or DO) Eliminate…
-
PH Electrode
OaktonOakton combination electrodes are available in a variety of styles to meet the needs of your application. Epoxy electrodes are impact resistant and provide excellent durability for field applications. Glass electrodes withstand aggressive chemicals. Choose junction and tip style based on the needs…
-
pH 5+ Meter
OaktonHigh ±0.01 pH accuracy at economical prices Reads pH and temperature Automatic Temperature Compensation (ATC) All push button operation Three-point pH calibration Auto buffer recognition Hold function; Auto-off Use with most pH electrodes with BNC connectors …
-
High accuracy in changing temperature conditions Temperature readout and automatic temperature compensation (ATC) Calibrate the TDS 6+ at one point and all five ranges are covered These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that…
-
Direct plug-in of heating or cooling devices Simple on/off control to sophisticated auto-tuning PID control Simultaneous view measured value and set point on two-line display Front panel indicates output and alarm conditions Grid support bracket ideal for fume hood mounting …
-
Upgrades to design and function won't break the bank Conductivity, TDS, and salinity in one meter Expanded 4-digit dual-line display shows conductivity and temperature readings simultaneously Additional key provides an easier, more intuitive interface Improved cap functions…
-
Ensure accurate readings by using Oakton solutions with your DO meter. Replacement electrolyte should be used whenever you replace the membrane or membrane cap.
-
Thermocouple Probes
OaktonEconomical General Purpose Probes (6 sec. T.C.) High-Temperature Thermocouple Probes Designed for Multiple Bends in any Environment Bend probes around pipe diameters as small as twice the sheath diameter to easily determine your pipe temperature. Response Time: 0.3 1.5 seconds or…
-
pH Calibration buffers for tight tolerances For meters with 0.001 resolution Buffers are color-coded for easy visual identification.
-
Digi-Sense PH Electrode
OaktonThe Oakton Digi-Sense double junction pH electrode with BNC connector, is suitable for use with all Oakton 600 series pH meter models. Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample Choose from a variety of accessories…
-
These economical KECK adapters, clamps, and clips will not scratch glass or corrode—ideal for glass and tubing assembly. All KECK products are color-coded for fast, easy size identification. Use quick disconnect adapters for safe, convenient tubing-to-tubing or tubing-to-glass connections.…