Glass

Compare Tool

Select up to 3 products

1 - 32 of 218
Sort
View
Show
  • Tube Nessler Low Matchx6 50ml

    Kimble

    These Nessler tubes are ideal for color comparison. Shadowless bottom of each tube transmits undistorted light Rings and legend are durable white ceramic enamel 45310A series is supplied in matched sets of 6 Graduated ring scale of any of the six tubes will not vary by more than 3…

  • Cone Imhoff 1000ml

    Kimble

  • Tube, Centrifuge, Oil, 100ml

    Kimble

    KIMAX tube used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products D1796 and MPMS 10.4 standards); in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating…

  • Culture, Screw Thread, Borosilicate Glass Tubes

    Kimble

    Tubes are suitable for tissue culture work and general bacteriological use. Tubes are made from KIMAX-51 borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. Each tube has a chevron marking area. Trays are shrink wrapped in plastic film in modular…

  • Vial Sample S / T w / PTFE Cap 2ml Cs144

    Kimble

    Clear glass sample vials Closed-top white urea caps with PTFE-faced white rubber liners, attached Packaged in corrugated trays with partitions Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Water / Crude Oil Distillation Apparatus

    Kimble

    Conforms to ASTM D 4006 Apparatus is used for the distillation of water in crude oil. Apparatus includes 1,000 mL RB flask, 24/40 joints, Dean-Stark distillation receiver, dry trap and Liebig condenser Heating mantle must be purchased seperately

  • Pycnometer, 10 mL

    Kimble

    Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL…

  • Tube Culture 13 X 100mm Cs720

    Kimble

  • Flask Boiling Flat Bottom 250ml

    Kimble

    KIMAX boiling flask with a short joint neck. Designed from ASTM Specification E1403, Type I, Class 4 requirements.

  • KIMAX Measuring Gas Buret

    Kimble

    Without stopcock 5579M10 Buret is graduated from 0.5 to 50 mL in 0.1 mL divisions, tolerance ±0.10 mL.

  • Tube Test Grad 10ml

    Kimble

    Reinforced bead top Scale is a permanent brown stain Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Tube Culture 25 X 200mm Cs192

    Kimble

    Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

  • Bulk Pack Clear Glass Medium Round Bottles

    Kimble

    CLEARANCE SALE! Original Price: $145.85 Bottles come bulk packed in shrink wrapped with caps in bags Clear glass allows for easy viewing of contents Wide mouth design allows for efficient addition and removal of contents Easy-to-use, versatile storage for solids, liquids, powders…

  • Tube Test 19 X 150mm Cs576

    Kimble

    KIMAX-51 tube made from N-51A borosilicate glass tubing with a sturdy lip and uniform wall thickness for maximum heat transfer and chemical resistance. Tube is without a marking spot.

  • Vial 40ml od28 Cs72

    Kimble

    Manufactured from clear KG-33, borosilicate glass Open top black polypropylene closures attached Closures supplied with PTFE-faced silicone septa

  • Angled Three Neck Round Bottom Flask

    Kimble

    Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Glass Pennyhead Stopper, Standard Taper 24/40

    Kimble

    Hollow plug type With sealed bottom and vertical penny head

  • Funnel Squibb Pear PTFE Stpk 2000ml

    Kimble

    KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and polytetrafluoroethylene stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete…

  • Tube Culture Graduated 10ml

    Kimble

    KIMAX® culture tube intended primarily for use in the testing of milk for the presence of bacteria by the methylene blue reductase test. Smooth, fire-polished rim Graduation line is located at the 10 mL level Durable white ceramic enamel marking spot Described in APHA Standard…

  • Vial S / T Clear 5ml No Graduation

    Kimble

  • Dilatometer Bottle, Black Scale

    Kimble

    Capacity: 1.4 mL 14/20 Standard Taper joint Graduations/subdivisions: 0-1.4 mL/0.005 mL For the determination of the solid fat index (an empirical measure of the solid fat content) of shortenings, margarine oils and other fats with a solid index of 50 or less at 10°C. Results…

  • Tube Culture 38-430 38 X 200mm

    Kimble

    KIMAX culture tube is made from tubing with uniform wall thickness for maximum heat transfer and chemical resistance. Thread finish complies with Glass Packaging Institute (GPI) requirements. Cap is not attached. Designed from ASTM E982, Type VI, Class A requirements. Replacement caps are 45066B (9210R54).

  • Bottle Weighing Tall Plug 30 X 60mm Cs18

    Kimble

    KIMAX bottle with a plug-style, closed bottom stopper that fits into an internally ground body. Designed from Federal Specification NNN-B-1493, Type I, Style I requirements Plug-style glass stopper with a closed base fits into the neck of the bottle and seals it to secure contents and…

  • Medium Tubing 1.75" X 0.09" X 48.25"

    Kimble

    33 expansion borosilicate glass tubing with cut ends. Medium wall precision bore tubing Tubing has a low coefficient of expansion and a high resistance to chemical attack Conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Bottle Reservoir 2L

    Kimble

    KIMAX bottles are graduated with an approximate capacity scale. Bottom outlet is controlled with an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring…

  • Vial 5 ml

    Kimble

  • Buret Titration Right Hand 50ml

    Kimble

    KIMAX® buret used in electrometric titration assemblies. Stopcock is set at a 55 degree angle to the center of the graduated scale Offset dispensing tip Burets have funnel tops Durable black ceramic enamel scale Manufactured from 33 expansion, low extractable borosilicate…

  • Buret Raysorb Straight w / PTFE Stopcock 50ml

    Kimble

    KIMAX buret with a PTFE plug. RAY-SORB processed to protect liquids sensitive to light of shorter wave lengths. KIM-KAP dust cap is included White ceramic enamel scale. Subdivisions: 0.1mL Capacity: 50mL Replacement stopcock is 41500F-2 (8682B22).

  • Flask, Culture, Long Neck, Scale, 125ml

    Kimble

    KIMAX® flask has a thick-walled tubing neck with a plain fire-polished finish sealed to an Erlenmeyer-shaped body. Autoclavable All flasks have durable white ceramic enamel scales to indicate approximate volumes at various levels Designed from ASTM Specification E1404, Type IV,…

  • KIMAX Cma Type No. 1 Buret

    Kimble

    With funnel top and PTFE stopcock plug with 2 mm diagonal bore Capacity 50 mL in 1/10 mL divisions; limit of error 0.05 mL Each buret is serial numbered and supplied with a certificate of graduation accuracy.

  • Vial Sample S / TW / PTFE Cap 24ml Cs144

    Kimble

    Clear glass sample vials Closed-top white urea caps with PTFE-faced white rubber liners, attached Packaged in corrugated trays with partitions Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.