Kemtech America
-
Gooch Crucible
Kemtech AmericaThe Kemtech America gooch crucible is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures long lasting usage.
-
SYNTHWARE Glass High Vacuum Double Oblique Bore Stopcocks
Kemtech AmericaStopcock, High Vacuum, Double Oblique, Synthware, Bore: 4mm, Plug Size: 17.35/50, Stem OD: 10mm, With solid glass plug, Precision ground with corresponding numbers on the barrel and the plug.
-
SYNTHWARE Filtration Apparatus
Kemtech AmericaUsing 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…
-
SYNTHWARE NMR Tube Washer
Kemtech AmericaWith 24/40 inner joint and 10mm hose connection. For 5mm NMR tube only. The NMR tube is inserted into the tube cleaner with its plastic cap placed on the closed end to provide support and a vacuum seal. The washing solvent is sequentially added through the side tube while a vacuum is applied…
-
SYNTHWARE Liebig Condensers with Removable Hose Connections
Kemtech AmericaLiebig Condenser, Removable Hose Connections Jacket Length: 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22, and 24/40 available Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.
-
SYNTHWARE Septum Stoppers, Sleeve Type
Kemtech AmericaSleeve Type Septum Stopper made from natural white rubber.
-
Indentations at the bottom for supporting packing material. Jacket permits the column to be used as a condenser.
-
Synthware Distilling Adapters, 105°
Kemtech AmericaSynthware distillation adapter with sealed in drip tip. Adapter is bent at 105 degrees. Standard taper top outer joint and lower inner joints.
-
SYNTHWARE Peptide Synthesis Vessels, Solid Phase
Kemtech AmericaPeptide Synthesis Vessel, Solid Phase, Synthware, Capacity: Available in sizes ranging from 10-50mL, Frit Porosity: Coarse or Medium, Frit Diameter: Available in sizes ranging from 15-25mm, GL Thread: 14 or 25 available, Arm OD: 8mm, Supplied with a PTFE lined cap and straight bore PTFE stopcock…
-
Kemtech America Microscope Slides in either Super White Glass or Green Glass. Many color options available with ground or beveled edges and 45 or 90 Degree corners.
-
SYNTHWARE Diagonal Rotary Evaporator Condenser
Kemtech AmericaDouble coil condenser for use with Buchi rotary evaporators for cooling with tap water in a diagonal position. A 19/38 top valve. With 35/20 spherical ball joint.
-
SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a reinforced beaded top. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to prevent…
-
SYNTHWARE Clamp Bosshead
Kemtech AmericaClamp Bosshead, Synthware, For rods up to 15mm diameter, chrome plated finishwith plastic headed screws.
-
SYNTHWARE Transfer/Storage Flasks
Kemtech AmericaSYNTHWARE transfer/storage flask for long term storage of deoxygenated solvent. Recovery of solvent is done thru the valve body using a cannula or syringe.
-
SYNTHWARE Solvent Still, Built-In Condenser
Kemtech AmericaSolvent Still, Built-In Condenser Capacity: 125mL Joints: 24/40 Threaded Side Port: 14/10
-
SYNTHWARE Flask-Length PTFE Stoppers
Kemtech AmericaPTFE Stopper, Flask Length, Synthware, Various Joint Sizes Available.
-
SYNTHWARE Solvent Still Head, Repurification
Kemtech AmericaSolvent Still Head, Repurification Joint: 24/40
-
Synthware Distilling Adapters, 75°
Kemtech AmericaSynthware distilling adapter with top compression cap. With same size standard taper inner joints on bottom and side arm. Cap accomodates 5.0 - 7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton o-ring.
-
SYNTHWARE Thermometer Adapter with Hose Connection
Kemtech AmericaThermometer Adapter, Vacuum, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.
-
SYNTHWARE Buchner Filter Funnels with Perforated Plate
Kemtech AmericaBuchner Filter Funnel with a sealed in Perforated Plate Capacity: Available in sizes ranging from 60-600 mL Glass Disk Size: Available in sizes ranging from 42-90mm. Not recommended for filtration where pressure will exceed 15 psi
-
SYNTHWARE PTFE Stoppers for Extraction
Kemtech AmericaPTFE Stopper, Standard Taper, Extraction, Synthware, Various Joint Sizes Available, Stopper has a Nylon extraction nut permitting easy removal of the stopper from the glass outer joint.
-
Synthware Vacuum/Argon/Nitrogen Inlet Adapters
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure.
-
SYNTHWARE High Vacuum Valve Plugs
Kemtech AmericaHigh Vacuum Valve Plug, PTFE Protected, Synthware, Size: 0-4, 0-8 or 0-12mm available, Plug has a machined in PTFE tip O-ring to make the primary seal.
-
-
SYNTHWARE Glass Cutter
Kemtech AmericaWith rack on shank for breaking off single or double strength glass, extra large natural diamond for durability.
-
-
SYNTHWARE Bubbler
Kemtech AmericaWith small ball joints to prevent mineral oil being sucked back under sudden negative pressure in the system.
-
Synthware Inlet Adapters
Kemtech AmericaSynthware inlet adapter with a standard taper inner joint. Design allows introduction of reactants below the surface. The serrated hose connections have an O.D. of 10 mm.
-
SYNTHWARE High Vacuum Valves, 180 Degree
Kemtech AmericaHigh Vacuum Valve, 180 Degree, Synthware, Size: 0-4 or 0-8mm available, Side Arm OD: 9mm.
-
SYNTHWARE West Condensers
Kemtech AmericaWest Condenser Joints: 14/20, 19/22, and 24/40 available Jacket Length: 110, 190, 200, and 300mm available Narrow annular space for fast collant speed thus high cooling efficiency.
-
-
Synthware Inert Gas Adapters with 2 Hose Connections
Kemtech AmericaSynthware Inert Gas Adapter has two hose connections 180 degrees from one another to provide a flow of inert gas over the apparatus. The joints are standard taper inner joints.