Eberbach

Compare Tool

Select up to 3 products

All Products

Eberbach

1 - 32 of 74
Sort
View
Show
  • Model 7000 Tissue Homoginizer

    Eberbach

    Model 7000 incorporates the 7085 stirrer as the drive unit for the tissue homogenizer. The unit is designed for use with Potter-Elvehjem style tissue grinders. A chuck holds pestles with shafts up to 3/8” in diameter. Speed varies from 30-625 rpm (max torque 96 oz-in). The standard unit is made…

  • Model 5650 Benchtop Reciprocal Shaker

    Eberbach

    Eberbach’s 5650 Digital Bench top Reciprocal Shaker is designed expressly to occupy a minimum of bench space while maintaining the versatility of our larger units. The unit is powered by a 1/30 hp Bodine DC motor which drives the platform through a filtered SCR controller. The speed is…

  • Model 6145 Mid-Range amd 6155 Large Orbital Shaker

    Eberbach

    Floor mounted with optional stand or benchtop mounted with suction feet Model 6145 has a 50 lb load capacity Model 6155 has a 150 lb load capacity Variable speed 32 to 320 rpms Digital tachometer Digital timer 1" dia. orbit Eberbach's Medium Variable-Speed Orbital…

  • Stormer Viscometer Accessories and Parts

    Eberbach

  • Model 5850 Benchtop Reciprocal Shaker

    Eberbach

    Variable spped 20 to 240 osc / min Utility box top plate or flask carrier top plate 10 to 15 lbs at max rpms Eberbach's 5850 Variable-Speed Benchtop Reciprocal Shaker is designed expressly to occupy a minimum of bench space while maintaining the versatility of our larger units. Like all…

  • Labtools Stainless Steel Agitators, Shafts, and Propellers

    Eberbach

    Stainless Steel Stirring Rods Blades riveted onto 1/4” shafts Blade pitch can be adjusted to control agitation 18” and 24” lengths recommended for Hollow Spindle Stirrers Stainless Steel Stirring Shafts Stainless Steel Shaft with fatted section for securing…

  • Waring® Lab Blenders

    Eberbach

  • Model EL680 Hand Motion Shaker

    Eberbach

    Eberbach's Hand Motion Shaker EL680 is an effective tool for extracting, dissolving and emulsifying samples. Featuring an advanced motor, the EL680 mimics human hand motion from very slow, gentle mixing to violent agitation. This variable speed unit runs from 100-700 oscillations per minute…

  • Model 6010 Fixed speed Reciprocal Shaker

    Eberbach

    Bench-top mounted with suction feet Load capacity up to 40 lbs Fixed speed at 180 or 280 osc/min Eberbach's Bench top Fixed-Speed Reciprocal Shakers are designed for your lab's general purpose shaking needs. If your sample preparations do not require a variable speed shaker…

  • Blending Containers

    Eberbach

    0379V93: Glass Container w/1-Piece Bakelite Cover. 1-Liter container with working maximum of 500 ml and minimum of 75 ml. This heat resistant glass container measures 8”H x 4-2/4” dia at top. Contains a standard blending assembly (8670). Fits Waring power units 0379V94: Glass…

  • Waring® Blender Containers

    Eberbach

    Blending containers for Waring® Blenders.

  • Mason Jars

    Eberbach

    Preserving An inexpensive preserving jar with space-conserving cross-section With zinc-coated metal screw cap with glass liner and rubber gasket

  • Wooden Slide Cabinets

    Eberbach

    Unit System Of substantial oak, with 100 stamped aluminum trays, each compartment to hold 20 slides size 3” x 1” or 75 x 25 mm Supports slides horizontally, so that they are entirely visible and can be dried in storage position to lessen handling. Total capacity, 2, 000…

  • Model 7195 Overhead Stirrer 150-2500 rpm

    Eberbach

    A general purpose stirrer powered by a totally enclosed PM motor which features high coercively ceramic magnets and long-life brushes. It has been designed for high torque, reduced weight and size, efficient heat dissipation and continuous operation. The 1/17 hp motor produces 24 oz-in of torque at…

  • Waring® Lab Blenders

    Eberbach

    Eberbach offers a variety Waring Blenders and Eberbach custom blending containers to suit your needs, including borosilicate glass containers and semi micro stainless steel containers . Our containers are built to endure the toughest environments.

  • Model 6360 Hotplate Shaker

    Eberbach

    Benchtop unit with suction feet Variable speed between 20 to 240 ocs / min 20 lb wieght capacity at maximum speed or 40 lbs at low speed Digital count down timer Digital tachometer The Hotplate Shaker #6360 is powered by a 1/30 hp Bodine DC motor which drives the platform through a filtered…

  • Multi-Tube Vortexer

    Eberbach

    Multi-tube vortexer is designed to produce vortex mixing action of aqueous solutions in small flasks, vials, and tubes. The top plate moves in a tight 0.126” orbit at speeds between 600 and 2200 rpm. Eberbach’s clamping system can hold multiple tube sizes and (number of tubes held depends on tube…

  • Utility Box fits 6000, 6155, 6010

    Eberbach

    Holds various size and shape containers including test tube supports Slots in the four sides accommodate both cross-wise and length-wise bar clamps Aluminum box measures 18 x 12 x 4 inches high, with rubber-covered floor. Rubber-covered clamps may be secured anywhere in the slots by wing…

  • Waring® Power Unit Lab Blenders

    Eberbach

  • Con-Torque Lab-Stir, Variable-Speed, 0-700 rpm, 230V, 50/60 Hz

    Eberbach

    Model 7225 Con-Torque Stirrer is suitable for continuous duty stirring of highly viscous materials. A 1/9 hp motor and gear drive produces 196 oz-in of continuous torque which drives the hollow spindle through a speed range of 0 to 700 rpm. Variable Speed 0 - 700 rpm Max torque 196 oz-in…

  • 25 ml Flask Holder Erlenmeyer, Eberbach®, Nickel Plated Bronze

    Eberbach

    Erlenmeyer Flask Holder for Model E6010 - Fixed Speed Reciprocal Shaker (Thomas No. 8287C30) .

  • Model 2500 Clinical Rotator

    Eberbach

    Eberbach’s Clinical Rotator 2500 is designed for V.D.R.L., Mazzini, Kline, Boerner-Jones-Luken, cardiolipin, other serological tests, and clinical applications within a speed range of 30 to 350 rpm. A 13” square platform with sponge rubber pad orbits 6” above the bench. Case…

  • Bar Clamps

    Eberbach

    Bar Clamps Rubber-covered steel Includes wing nuts and washers for installation on carrier 8287R10 bar clamp is 13 inches in diameter; for use with 8287J20 box carrier only. 8287R15 is 19 inches in diameter; for use with 8287J20 box carrier only.

  • Heavy-Duty Floor Model Shaker, Eberbach®, Reciprocal, Variable Speed, 70-280

    Eberbach

    Eberbach’s Heavy Duty Variable-Speed Reciprocal Shaker E5900 is designed to shake large containers or large quantities of smaller containers. Essentially a floor unit the E5900 can handle loads up to 100 lbs with the capability of running 24/7 while needing only routine maintenance. The E5900…

  • Model 8580 Semi-micro SS Container

    Eberbach

    Semi-Micro Container, Stainless Steel with Press Fit Lid. Total capacity is 360 ml with a maximum working volume of 250 ml and a minimum of 25 ml. Measures 6 3/4” H x 1 1/8” dia at bottom, faring to 1 15/15” on top. Complete with semi-micro blending assembly (#8730). Fits Waring power units.

  • Large Microplate Vortexer

    Eberbach

    Large capacity Microplate Vortex Mixer is designed to produce vortex mixing of aqueous solutions in standard and deep well micro-titer plates. The top plate moves in a tight 0.125” orbit at speeds between 120 and 2200 rpm. Built in clamps hold 8 deep well titer plates or 16 standard plates. …

  • Slide Carrier, Eberbach®, Holds Nine (9) 50 X 75 mm Micro Slides, For Eberbach

    Eberbach

    Holds nine 50 x 75 mm slides Formed to fit over the E2500 Clinical Rotator ( 0379W14) and the E2450 Economy Rotator Slides are held securely in slots which have finger holes on each side to facilitate removal

  • 4000 ml Flask Holder Erlenmeyer, Eberbach®, Nickel Plated Bronze

    Eberbach

    Erlenmeyer Flask Holder for Model E6010 - Fixed Speed Reciprocal Shaker (Thomas No. 8287C30) .

  • Universal U-Shaped Support Base And Rod

    Eberbach

    Eberbach Labtools 7560 Universal Support, Order No. 7560 - 3/4" dia x 34" L 2 section nickel-plated steel support is mounted in iron base Base has 5 threaded holes for convenient rod placement Breaks down into compact unit Package size 18-1/2" x 4" x 2" …

  • Metal Screw Cap For Blenders

    Eberbach

    Size No. 100, with pulpboard liner, for 3392J05 and J10 Glass Jars

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.