Contec Delicate Lab Cleaning Wipes
-
Amplitude Lambda Wipes
ContecThe Amplitude™ Lambda™ wipes is made from a nonwoven fabric comprised of a hydraulically entangled blend of 58% cellulose and 42% polyester staple fibers. The Lambda wipe is strong and durable, even when wet, and is low in particles and extractable residues. An excellent all-purpose…
-
Anticon® Gold HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. Anticon Gold HeavyWeight uses patented textile technology to achieve superior sorption characteristics for critical applications. The proprietary sealed…
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
Quiltec I Wipes
ContecQuiltec I Wipes offer the highest sorptive capacity of any sealed edge wipe available. It is manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe. Additional fluid is captured within the quilted pockets between the…
-
These PROSAT ® Sterile ™ wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT ® Sterile ™…
-
PROSAT® Sterile™ Polynit Heatseal Vial Wipes are made from 100% knitted polyester presaturated with a blend of 70% IPA and purified water. The polyester wipe generates a low level of particles and fibers so is ideal for use in product contact areas, reducing the risk of product…
-
MicroGenesis™ Wipes
ContecMicroGenesis™ delivers the maximum amount of microfiber to pick up and retain particles dust and other contaminants in cleanrooms and other critical applications. For dry applications where particle pickup and retention is critical MicroGenesis delivers unprecedented performance. The…
-
PROSAT® Sterile™ Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in…
-
Contec's PROSAT® Sterile™ Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT®…
-
PROSAT Wipes with CyQuanol
ContecPROSAT® Wipes with CyQuanol™ are intended for Life Science cleanroom manufacturers who want to effectively maintain cGMP compliance by maximizing efficiency and minimizing inconsistency in their contamination control process. PROSAT Meltblown Polypropylene Wipes with CyQuanol provide a…
-
Contec's Anticon 100® HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching. The wipes are cleanroom…
-
Textured 100% polyester no-run knit wipes with heatsealed edges Laser-cutting seals fibers at wipe's edge and allows for 100% utilization of wipe Laundered and packaged in a ISO Class 4 cleanroom Extremely low in particles, fibers and non-volatile residues (NVRS) Good…
-
PROSAT® Delta™ Wipes
ContecPROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT PS-Si Delta Wipes provides the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven…
-
ReFIBE Wipes
ContecContec’s ReFIBE wipes are made from 100% recycled plastic bottles making them a sustainable single-use option for critical manufacturers in the Life Sciences, Pharmaceutical, Medical Device, and Semi-Conductor industries. The revolutionary recycling process converts post-consumer plastic to…
-
These PROSAT® Sterile™ Theta™ Wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT®…
-
PROSAT® Theta™ Wipes
ContecThese PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT Theta wipes offer a soft and durable wipe…
-
The Thermo Scientific Orion™ Contec fluoride analyzer is mainly used in research facilities and chemical laboratories to conduct fluoride analysis. It helps in early fluoride detection and ensures reduced time consumption for analysis. It is convenient to use and easy to install. Meets CE, CSA, UL…
-
100% no-run interlock knit polyester with knife cut edges Contec's Anticon® Sterile 100™ are the sterile version of Anticon 100® HeavyWeight™ wipes. They are made from 100 continuous filament polyester with a double-knit no-run interlock construction. The clean cut…
-
Contec, Inc. products are intended for sale/shipment within North America only. International customers should contact their local Contec, Inc. distributor to place orders for Contec, Inc. products.
-
Contec's PROSAT ® Sterile ™ Polypropylene wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. The PROSAT…
-
Contec’s PROSAT® Sterile™ Polypropylene Low Endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. …
-
PROSAT® Pi wipes
ContecPROSAT® Pi wipes are designed to help life science manufacturers control contamination and ultimately maintain cGMP compliance while consuming less resources. The wipes are made from polyester and nylon split microfiber, enhancing their cleaning effectiveness and contaminant pick-up ability.…
-
Anticon MicroQuilt Wipes
ContecAnticon® MicroQuilt combines the cleanliness and sorbent capacity of Quiltec® with the microfiber particle pick-up ability of Anticon® Gold Sorb. This hybrid creates the most sorbent, cleanest wipe Contec offers. MicroQuilt is laser-cut with heatsealed edges and cleanroom laundered…
-
Contec's Anticon 100® HeavyWeight™ wipes are made from 100% continuous filament polyester with a double-knit no-run interlock construction. The clean cut edges create a very soft wipe, where the whole of the wipe fabric can be used with no risk of scratching. The wipes are cleanroom…
-
PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…
-
PROSAT Wipes with CyQuanol
ContecPROSAT® Wipes with CyQuanol™ are intended for Life Science cleanroom manufacturers who want to effectively maintain cGMP compliance by maximizing efficiency and minimizing inconsistency in their contamination control process. PROSAT Polynit Heatseal Wipes with CyQuanol are manufactured…
-
PROSAT® Sterile™ Polywipe-C Heatseal Wipes are made from a standardweight 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning.…
-
Polynit Heatseal Wipes are made of 100% knitted textured polyester with laser sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic…
-
TuffStuff™ Wipes
ContecTuffStuff are high quality critical task wipes. Available in light, medium and heavy duty, these wipes are solvent resistant and maintain their strength even when wet. TuffStuff wipes offer exceptional durability and cleanliness. TuffStuff Wipes are available in multiple sizes, weights, and…
-
Recommended for Grade A/B or ISO Class 3-8 environments - product contact areas 100% laundered knitted polyester generates very low levels of particles and fibers Laser sealed edges reduces fiber generation from the edge of the wipe Certified endotoxin level of <1 EU per wipe making…
-
Contec’s Anticon Gold StandardWeight wipes are made from 100% continuous filament polyester with a double-knit interlock construction. Anticon Gold StandardWeight uses patented textile technology to achieve superior sorption characteristics for critical applications. The proprietary sealed…