The Chase Instruments brix hydrometer is suitable for use in research facilities and general laboratories while conducting wide range of experiments. It features -5 to 5 brix range. It is mainly used to measure relative density of liquids.

Handheld refractometers all with an LED light helped to enhance viewing in little to no light. All-Metal construction, making this a durable instrument  Provided with Illumination Lens and unqiure serial number. The body of this instrument is All-Metal construction, making this…

For direct reading of degree (percentage) of saturation of salt at 60°F Range from 0° to 100° in 1° divisions; 100° indicates a saturated solution of sodium chloride in water, i.e. 26.395% salt Approximate total length 305 mm, approximate length of graduated scale 150…

Similar to 6030F10 series, but with thermometer; range 0 to 50°C in 1° divisions, with red line at 20°C and with temperature correction scale Length 375 mm, approximate length of scale 120 mm, with graduations at least 1.2 mm apart Interval 0.1°; tolerance ±0.1°…

The Chase Instruments 300 mm baume precision hydrometer is suitable for use in research facilities and general laboratories while conducting wide range of experiments. It features 0 to 50 baume range 0.1 mm interval.

For testing small quantities of liquids heavier than water Approximate total length 150 mm, approximate length of graduated scale 45 mm; interval 0.005 Tolerance ±2 scale divisions Requires a cylinder 150 mm deep x 25 mm i.d. and approximately 50 mL of liquid.

The Chase Instruments baume precision hydrometer with a measuring range of 0 to 11 is used in chemical laboratories and research facilities for the measurement of specific gravity on evenly spaced scales.

The Chase Instruments brix precision hydrometer with a measuring range of 15 to 25 is calibrated at a temperature rating of 20 degree C and is used for the measurement of sucrose levels.

For liquids heavier than water Approximate total length 305 mm, approximate length of graduated scale 135 mm, except range 1.000 to 2.000, which has scale approximately 150 mm long and is made without conventional enlarged bulb at bottom Tolerance ±1 scale divisions Requires a cylinder 340 x 38…

The Chase Instruments baume precision hydrometer with a measuring range of 60 to 70 is used in chemical laboratories and research facilities for the measurement of specific gravity on evenly spaced scales.

Precision digital stem thermometer with lollipop head. Range -58ºF to 626ºF and -50ºC to 330ºC Resolutions: 0.1ºF or ºC. Accuracy: +/- 0.8ºF (0.4ºC) from 14 to 212ºF (-10/100ºC) Auto Calibration Min/Max Memory Auto Off Feature after…

The Chase Instruments hydrometer set is used for the measurement and calibration of relative densities and specific gravities in chemical laboratories and research facilities.

The Chase Instruments heavy specific gravity hydrometer with a measuring range of 1.2 to 1.42 is an ideal tool to measure the relative density and specific gravity of the chemical liquids.

The Chase Instruments baume precision hydrometer with a measuring range of 0 to 70 is used in chemical laboratories and research facilities for the measurement of specific gravity on evenly spaced scales.

With range 0° to 100° Tralle in 1° divisions and 0 to 200° above proof in 2° divisions Calibrated at 60°F within a tolerance of ±0.5 smallest scale division Approximate total length 305 mm, length of scale 150 mm Requires a cylinder 340 x 38 mm and…

The Chase Instruments salt hydrometer with a measuring range of 0 to 120 is used for various analytical purposes in chemical laboratories and research facilities.

Pocket Dial Thermometers Provided with polycarbonate lens and with a plastic case and clip Accuracy is 1% 1" x 5" stem

Chase brand micro-hematocrit tubes are manufactured from soda lime glass, packed in plastic vials with reclosable snap-lock caps to maintain cleanliness. Ends may be sealed by flame or sealing clay They are available in borosilicate glass as a special order Heparinized capillary…

The Chase Instruments hydrometer is used for the measurement and calibration of relative densities and specific gravities in chemical laboratories and research facilities.

For liquids heavier than water; dual scale Approximate total length 310 mm, approximate length of graduated scale 140 mm Tolerance ±1 scale division Requires a cylinder 340 x 38 mm and approximately 260 mL of liquid. Models 6026Q20 and Q30 hydrometers have specific gravity scale in divisions of…

Chase brand micro-hematocrit tubes are used to measure the volume percentage of red blood cells in blood. Packed in plastic vials with reclosable snap-lock caps to maintain cleanliness Ends may be sealed by flame or sealing clay Ammonium heparin does not interfere with sodium…

The Chase Instruments heavy liquid specific gravity hydrometer with a measuring range of 1.2 to 1.42 is an ideal tool to measure the relative density and specific gravity of the chemical liquids.

Infrared Thermometer used for industrial use, including- Electrical troubleshooting, automotive repair and maintenance, air conditioning and more.

Hydrometers are used to measure the specific gravity or relative density of liquids. They are commonly used in beer and wine making, for measuring petroleum liquids, for the measurement of saltwater, and for measuring the density of sugar solutions.

The Chase Instruments baume heavy specific gravity hydrometer with a measuring range of 54 to 65 is useful for obtaining the exact and precise of levels of specific gravity levels.

Chase brand Caraway tubes are manufactured with tapered tips for easy collection of micro blood samples. Designed for use with the Caraway technique Packed in lint-free boxes Ends may be sealed with clay or caps Heparinized tubes are evenly coated with ammonium heparin to prevent…

Precision Digital Thermometer supplied with ISO 17025 Calibration Certificate Waterproof IP67F -148°F to 572°F and -100°C to 300°C Resolutions: 0.1°C/°F Accuracy { -/+(0.1% reading + 0.4°C)} { -/+(0.1% Reading + 0.8°F} Probe 120mm Extreme…

For liquids heavier than water Tolerance ±1 scale division Requires a cylinder 300 x 38 mm and 300 mL of liquid.

The Chase Instruments baume precision hydrometer with a measuring range of 50 to 61 is used in chemical laboratories and research facilities for the measurement of specific gravity on evenly spaced scales.

KESSLER Precision Laboratory thermometers are supplied in yellow back glass with PERMETECH Brand permanent pigmentation of graduations. All of these instruments are aged and annealed for extended accurate service life, and are suitable for certification.