The compact Lyovapor™ L-200 Classic offers high-quality Freeze Drying with a high level of automation. Upgrade the Classic L-200 model anytime to achieve full automation in your evaporation process. Cost Effective Modular platform for future upgrades Small footprint …

The Rotavapor® R-80 is an effective rotavapor for limited budgets. Fundamental design fulfills essential needs of evaporation. High longevity due to high quality material. Reliable operation due to robust design. Quick and ergonomic operation with smooth manual lift mechanism. Easy flask…

The Buchi seal holder is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe.

These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

Spider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.

The BUCHI accessory is suitable for use with Multivapor™ evaporator unit models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

The Buchi connection set is one of the main accessory of rotavapor and is compatible to use with Multivapor™ evaporators. This set provides good connection to any evaporator assembly.

The BUCHI accessory is suitable for use with vacuum controller, heating baths or evaporator unit models. You can choose your ideal replacement part or accessory which ensures smooth functioning of units. These products are made of materials which offer enhanced durability.

Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The dry air supply supplies particle free dry air on demand for the evaporative light scattering detector (ELSD) system of a Chromatography system. The operation of the dry air supply is controlled by the Chromatography system software. A triggering signal is supplied to the dry air supply which in…

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

FlashPure EcoFlex cartridges are packed with quality silica designed to help maximize cost and performance on any flash purification instrument. Large selection of cartridge sizes Several stationary phases available Luer lock inlet and Luer slip outlet Non-RFID suitable on any…

The BUCHI accessory is suitable for use with melting and boiling point instruments. You can choose your ideal replacement part or accessory which offers smooth functioning of the models. These products are made of materials which ensure long lasting life.

A variety of accessories are available for use with Buchi evaporators

The compact Lyovapor™ L-200 Pro offers high-quality Freeze Drying with a high level of automation. Upgrade the Classic L-200 model anytime to achieve full automation in your evaporation process. Fully Automated Method creation and reporting Real-time pressure and temperature…

The BUCHI accessory is suitable for use with Rotavapor® or Multivapor™ evaporator unit models or with Sepacore® flash system models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The Buchi type s condenser assembly comes with a cooling coil and a cold trap and is used with Multivapor™ evaporators. The combination of plastic and glass coating provides added strength.

The I-100 is an easy to use interface that controls the vacuum digitally. It is optimally suited to on/off-regulate the Vacuum Pump V-100. 1190U96 Compatibility Pack: For V-100 and V-700/V-710, with support set, communication cable, power pack, valve unit not included. Vacuum…

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

Simple menus and programs are easy to navigate on the intuitive LCD display, with either manual or automatic, real time video instrument. • For determination of melting and boiling points • Calibration in the field is easily accomplished with an intuitive step-by-step process …

The Buchi vacuum gasket set is compatible for use with B-585 glass oven. Gaskets ensure smooth functioning of oven units. These products are made of materials which offer enhanced durability.

The Buchi safety shield is one of the main accessory of rotavapor and is compatible to use with Multivapor™ evaporators. This shield ensures good safety for both the device and the user.

The BUCHI condenser and cold trap with receiving flask are suitable for use with B-585 series glass oven models and Kugelrohr models. You can choose your ideal replacement part or accessory which ensures smooth functioning of glass oven units. These products are made of materials which offer…

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

FlashPure Select cartridges are packed the highest quality silica designed to help maximize performance on any flash purification instrument. Large selection of cartridge sizes Several choices of particle size Non-RFID suitable on any system FlashPure Select cartridges are…

Central control of all process parameters The Interface I-300 is the central control unit for all process parameters of a Rotavapor® R-300 system. This includes rotation speed, temperature (heating, cooling, vapor) and pressure. Various distinct operating modes (e.g. automatic, dynamic,…

For small - medium sized test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area…

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…