Clear
-
Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological,…
-
titeSeal™ Microcentrifuge Tubes
ACTGene, Inc.1.5ml and 2.0ml microcentrifuge tubes are easy to open with leak-proof tight seal cap. Withstand 21,000xg. Clear and clarify for easy viewing and graduation with writing area. Certified for DNase, Rnase, DNA, PCR inhibitor, and pyrogen free. Available in sterile and non-sterile choices. …
-
BRAND Microcentrifuge Tubes
BrandTech®BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…
-
Self-sealing filter tip protects pipettors from crossover contamination by not allowing liquids or aerosols to touch pipettors. Free of pyrogens, DNA, RNA, Rnase, and DNase. Presterilized. Individually wrapped.
-
Specimen Transfer Bags
Elkay Plastics3-wall specimen bags offer a combination of reclosable and rip-open capability for convenience of handling and access. Inner packed in 100s.
-
LK 3 mil LDPE Flat Bag
Elkay PlasticsLow Density Polyethylene (LDPE) bags are the most commonly used plastic bag because they provide excellent protection and excellent value. LK®Polyethylene bags are made from virgin materials, so they comply with FDA requirements for use in food applications.
-
Tubing,Cleanroom .002" Nylon Clear Level 50 Clean
CE-Force® (powered by Thomas Scientific)Nylon 2mil Rollstock Tubing is made in a cleanroom from the finest Barefoot resin certified to meet IEST CC 1246E cleanliness levels. Ce-Force packaging combines strength and cleanliness to create a protective barrier with lot traceability back to the raw material. Nylon 2mil Level 50…
-
Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…
-
Autoclave & Biohazard Bags
MTC BioThese high temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard…
-
1.5mL SuperSlik® Polypropylene Microcentrifuge Tubes with Low Protein Binding surface for use with viscous samples. Designed to improve yields. Include flat caps and writing surface. In resealable bags. With flat snap caps, side graduations, and frosted writing surface Ultra low fluid…
-
All Weather Permanent Adhesive Vinyl Label Tape for B30 Printers
Brady WorldwideThis durable, low-shrink vinyl with ultra-aggressive adhesive is ideal for labeling pipes, equipment, shelves and nearly any other industrial surface. Highly pliable material with high-tack permanent adhesive for rough, highly textured, dirty and harsh environment surfaces--including outdoors.…
-
Scienceware® Write-On™ Label Tape
SP Bel-ArtAdheres to any clean surface, including Teflon® fluoropolymer resin coated materials, and peels off without leaving a sticky residue. Pencil, ball-point pen or solvent ink marker remain legible under the most demanding laboratory conditions. Colored paper with rubber resin adhesive…
-
Bag, Cleanroom .004" LDPE Clear Level 100 Clean
CE-Force® (powered by Thomas Scientific)LDPE 4mil open top clean bags are made in a cleanroom from the finest Barefoot resin certified to meet IEST CC 1246E cleanliness levels. Ce-Force packaging combines strength and cleanliness to create a protective barrier with lot traceability back to the raw material. LDPE (Low Density…
-
Drawstring Bags
Elkay PlasticsHigh molecular weight, high density film makes Plastronic® Merchandise bags strong and durable. They're embossed for easy opening, and are conveniently packaged in a low cube dispenser carton that’s easy to use at the retail counter and stores easily on shelves. Larger…
-
Tubing,Cleanroom .006" LDPE Clear Level 100 Clean
CE-Force® (powered by Thomas Scientific)LDPE 6mil Rollstock Tubing is made in a cleanroom from the finest Barefoot resin certified to meet IEST CC 1246E cleanliness levels. Ce-Force packaging combines strength and cleanliness to create a protective barrier with lot traceability back to the raw material. LDPE (Low Density…
-
LK 1 mil LDPE Flat Bag
Elkay PlasticsLow Density Polyethylene (LDPE) bags are the most commonly used plastic bag because they provide excellent protection and excellent value. LK®Polyethylene bags are made from virgin materials, so they comply with FDA requirements for use in food applications.
-
No matter how big the sample, we have the bag for it. At Labplas, we offer a multitude of sizes including large format bags, with or without our closure system.
-
Zipper Bags
Fruth PlasticsZipper bags the ubiquitous zipper bag is one of the most sought after bags in nearly every industry. From retail to food to gifts, these bags are the ideal way to hold products in place, keep air out and seal out the elements. Fruth Custom Zipper Bags are available in practically any color, print…
-
Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…
-
Liberty Packaging Bag
Liberty Film & PackagingThe Liberty packaging bag is a perfect thing to have in any chemical laboratories, medicinal facilities or healthcare units for a wide range of purposes such as scientific research and development.
-
Tubing
Cleanroom Film & BagsThe Cleanroom Film & Bags class 100 tubing in clear color, has 4 mil thickness and is made of material which ensures superior strength and durability.
-
Sealplate® Colortab™ Sealing Films
Excel ScientificColor dots and white labeling area on end tabs Second tab can be separated for lab-notebook insertion End tabs can be left on plate even if center of sealing film is removed Functional temperature range -40°C to +120°C SealPlate ColorTab adhesive sealing films consist of 50…
-
Microcentrifuge Tubes
United Scientific SuppliesMade from high-quality virgin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted surface for easier writing. Autoclavable tubes…
-
Clear LDPE Zip Bags with Write-on Block have a large writing area for sample notation. Made of virgin polyethylene and meets all USDA and FDA requirements. Protect, store or transfer samples and parts.
-
4ml ClearZip Clear Plastic bags, 10x12
International PlasticsOur 10" x 12" 4 Mil Clearzip® Locking Top Bags are used to seal heavy weight products that provide puncture resistance protection for industrial parts, tools and more. 4 mil Clearzip® Locking Top bags are made from low density polyethylene and can be recycled. Reclosable 10"…
-
Macro Centrifuge Tubes
Celltreat ScientificMacro Centrifuge Tubes offer the convenience of a micro centrifuge tube with the ability to process sample volumes up to 5mL In many applications, these tubes are the ideal alternative to 15mL centrifuge tubes, greatly reducing plastic waste, storage space and shipping costs All tubes have a…
-
Clear LDPE Zip Bags with Write-on Block have a large writing area for sample notation. Made of virgin polyethylene and meets all USDA and FDA requirements. Protect, store or transfer samples and parts.
-
LK 3 mil LDPE Flat Bag
Elkay PlasticsLow Density Polyethylene (LDPE) bags are the most commonly used plastic bag because they provide excellent protection and excellent value. LK®Polyethylene bags are made from virgin materials, so they comply with FDA requirements for use in food applications.
-
Liner Clear LLDPE 55G 1.15mil 38x58
Elkay PlasticsLinear Low Density Can Liners have excellent tear and puncture resistance, so they have the strength you need to handle your toughest jobs. They’re available in (S) Standard; (H) Heavy and (EH) Extra Heavy gauge thicknesses, all matched to standard can sizes.
-
CryoKING® Cryogenic Vials with pre-assembled Red, Green, or Blue Caps, Case of 1000. Size Options: 05ml, 1.0ml, 1.5ml. All tubes come with a 1D on the side and with or without a 2D on the bottom. (Includes 2 Free CryoKING® Cryoboxes with Purchase)
-
Tubing, Cleanroom .004" LDPE Clear Level 100 Clean
CE-Force® (powered by Thomas Scientific)LDPE 4mil Rollstock Tubing is made in a cleanroom from the finest Barefoot resin certified to meet IEST CC 1246E cleanliness levels. Ce-Force packaging combines strength and cleanliness to create a protective barrier with lot traceability back to the raw material. LDPE (Low Density…
-
Tips deliver highly accurate samples, seal well on the pipettor, and are easy to seat and eject.