DPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet…

4790 OctaSlide Comparator For determining Diethylhydroxylamine (DEHA) concentrations by way of iron reduction method Octa-Slide comparator provides 8 standards between 0.05-1.5 ppm Three reagents perform 100 tests

The hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.

Direct Reading Titrator, Syringe Type For use in LaMotte field titration kits as well as in standard laboratory procedures such as dilutions and solution dispensing Plunger and barrel of propionate plastic; barrel has Luer slip tip Capacity 1 mL   All-purpose…

Octet Comparator Method For determining hexavalent, trivalent, and total chromium Octet comparator has color standards representing 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2 and 1.5 ppm Cr Sufficient for 20 tests Test requires suitable hot plate, not included Reagent Refill only. …

The LaMotte DPD #1 free chlorine reagent tablet is compatible for use with calorimeter. It is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

Wide Range Octet Comparator Method Employ Octet Comparator having eight color standards in increments of 5.0 or 1.0 pH unit, as indicated in listings below Kits are offered covering ranges from pH 3.0-10.0 to pH 8.5-12.0 For each pH range, two kits are offered: one without and one…

Seven important factors for monitoring incoming water supplies, break, suds and bleach operations; also rinse and sour operations. The pH (alkaline) test uses a LaMotte Octa-Slide 2 Comparator. The alkalinity tests, chlorine bleach and hardness test utilize dropper pipet test methods. Reagents are…

No. 7436-01 Determines corrosion conditions in water supplies which can introduce lead and heavy metals Supports a water supplier’s lead abatement program in drinking water Includes TDS pocket tester to meet EPA requirements for corrosion testing Packaged in a portable…

Direct Reading Titrator For determining levels of sodium in natural and treated waters Range 0 to 500 ppm sodium in 10 ppm increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and…

Applications: Industrial Water Boiling and Cooling, Water and Wastewater This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.

For Environmental Studies For determining life-supporting chemistry of fresh-water environments, including ponds, lakes, streams, rivers and marshes Tests for: carbon dioxide, D.O., hardness, nitrate, trace phosphates, wide-range pH and silica Includes water sampling bottles, report forms and…

This kit tests for Calcium and magnesium hardness by using the Dropper Bottle method. All results are as CaCO₃. Range/sensitivity is 1 drop = 10 ppm or 1 gpg CaCO₃. Applications: Industrial Water Boiling and Cooling, Water and Wastewater # Tests (# Rgts): 50 at 200…

Test for 7 Essential Factors Chloride Sulfate Alkalinity Total Hardness Calcium Hardness Magnesium Hardness Sodium

The Model SD Monitoring Kit was specifically designed and manufactured to meet US EPA requirements for field test procedures approved in the Federal Register (Volume 55, No. 217), to monitor illicit storm drain connections. Each unit includes tests for pH, Total Chlorine, Total Copper, Phenols,…

4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm

Applications: Industrial Water Boiling and Cooling This test kit measures for Chlorine or Bromine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl or Br.

Drop Count Method For determining sulfite in water Employs modified APHA Method 428 One drop equals 5 ppm SO₃ Sufficient for 50 tests at 100 ppm

This kit tests for Phosphate using the Octa-Slide 2 Comparator. Range is 1.0 - 10.0 ppm (PO₄) and 10 - 100 ppm (PO₄). Applications: Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater  

Octet Comparator Method For determining aluminum in water Sufficient for 50 tests Octet Comparator has color standards representing 0, 0.1, 0.15, 0.2, 0.25, 0.3, 0.4 and 0.5 ppm. A pink to red color will form when aluminum reacts with Eriochrome Cyanine R, at pH 6.

The LaMotte phosphate reagent refill is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

For determining available chlorine in chlorine bleach or hypochlorite solutions Range: 1 drop = 0.005%, 0.05% or 0.5% Cl Sufficient for 50 tests at 0.1, 1.0 or 10%

Applications: Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater

Octet Comparator For determining sulfate in natural waters and waste waters Employs modified APHA turbidimetric method with barium chloride Has color standards representing 20, 40, 60, 80, 100, 120, 160, and 200 ppm sulfate, sufficient for 50 tests

Applications: Food and Beverage, Environmental Education, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater This kit tests for nitrate or nitrite using the Octa-Slide 2 Comparator. Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm…

Octet Comparator For determining zinc in cooling waters Octet Comparator has color standards representing 0, 1, 2, 3, 4, 6, 8 and 10 ppm zinc Employs buffered zincon reagent system Sufficient for 50 tests

Direct Reading Titrator (9859X42 and X43) For determining total hardness of water Range 0 to 200 ppm as CaCO₃ in 4 ppm increments Titrators may be refilled to test higher concentrations Sufficient for 50 tests at 200 ppm Direct Reading Titrator (9859X72 and X73) For…

Contents: 30 mL Hydrogen Peroxide 3% 30 mL Chloride Reagent A 30 mL Sulfuric Acid, 0.5N 15 mL Phenolphthaein Indicator 0.5% 2 x 30 mL Silver Nitrate 0.171 N 1 Sample Tube, 5-10-25 mL w/ cap  

This Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10…

Octet Comparator Method (9859C70 and C71) For determining ammonia nitrogen in water using Nessler method Octet Comparator has color standards representing 1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0 and 8.0 ppm ammonia nitrogen Sufficient for 50 tests Octa-Slide Comparator Method…

Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0…

For determining potassium in natural waters and brine Turbidity tube is calibrated for 6, 8, 10, 20, 30, 40 and 50 ppm potassium Sufficient for 100 tests For replacement reagent, order 0534B49