Designed for general laboratory applications, the CLïR 5000 Series Ultrapure Lab Water Systems deliver 2.5 LPM of Type I, 18.2 Megohm water quality on demand. The water is purified using a multi-stage purification process. In the two-step deionization stage, source water passes through…

Maintain your Thermo Scientific™ Barnstead™ point of use water purification systems with replacement Thermo Scientific™ Barnstead™ Cartridges.

The CLïR 3000 Series High Purity Water System provides 4.0 liters per minute* of 18.2 megohm water. A quiet recirculation pump ensures constant water purity. Standard equipment includes a built-in pressure regulator and a 0.2 micron final filter to remove bacteria. Water quality meets or…

The Hydra DI Series is a pre-assembled cartridge system that provides deionized water using a staged filtration process. Water purification is provided using a 3-step process. Stage (1) removes particles greater than 5 micron, chlorine, and organics. Stages (2 & 3) are deionizers…

Each cartridge kit includes one 0.2 micron absolute final filter.

Complete packages in one part number. Packages include the system and start-up consumables. Deliver ultrapure 18.2 megohm water from tap water with consistent quality, outstanding flexibility and great savings. Smart2Pure UV 3LPH Package Includes: the Water Purification System, Built…

The HygroPalm AW sets are the perfect solution for on-site measurements. They are supplied in a tough, lightweight ABS carry case and include everything needed for measurement and calibration. Set consists of: Handheld instrument: HP23-AW-A Measurement probe: HC2-AW Sample…

Can be wall or bench mounted Micro controlled purity monitor LCD shows resistivity, conductivity or TDS Programmable setpoint alerts user to change cartridges Four individual cartridges are available for all applications. Standby mode recirculates water for ten minutes every hour…

UV Lamp, Dual Wavelength 185/254nm is used to reduce TOC level in ultrapure water.

Environmentally Friendly RO Water Using the most advanced reverse osmosis (RO water) technology available, the Puro efficiently removes up to 99% of the contaminants from your mains water feed to produce primary RO water.  The Puro offers you a small footprint solution to feed glass…

LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure…

Softeners in the Model S Series are designed to produce a large volume of high quality softened water. Each softener has a faucet adapter that easily connects to any faucet. As water passes through the chamber, the resin column causes scale-forming calcium and magnesium ions to be exchanged for…

Multiple options for Type 2 water Five system options with permeate flows of 3, 7, 12, 20, or 40L/hr Future system upgrades accommodate greater capacities to meet growing water demands Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket…

Unique bagtank technology for the Highest Efficiency Advantages Reliable: Delivers consistently high water quality for reliable and reproducible results Efficient: Avoids tank cleaning thanks to unique bagtank technology Intuitive: Can be operated even with gloves via a…

The HPL-RO system uses feed water pressure to purify the water through a reverse osmosis membrane. The 4-stage filtration process reduces dissolved salts and organics from the water. The permeate water is conveniently stored in storage tank while the concentrated salts are sent to drain. The…

Fully automatic operation High purity pyrogen free output Low temperature distillate Operates from any raw water supply Reservoir level control Simple conversion to pre-treated feed Supplied with wall mounting bracket Safety features allow unattended operation Simple to…

Solenoid Valve Assembly for MegaPure Stills. Replacement for Models: MP-3A, MP-6A, MP-11A

Manufactured in the United Kingdom, the QWS4 230V water still combines high performance and reliability with value for money. This new Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water …

Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals and pyrogen removal ultrafiltration. As water exits the system, a final filter removes particulates and bacteria to reach Type I water specifications.

For Simplicity® systems with Elix® / RO / distilled water feed.

Microscale size solvent still that allows continuous reflux of solvents with stopcock open and collection of pure solvent when closed. Capacity of collection bulb is 15mL and has side port with cap and septum for syringe removal of contents. Still has 2 mm bore PTFE stopcock, 14/20 joints top and…

Prefilter Cartridge Produces up to 4 liters of pure water per minute Can be used as pre- or post-filter with B-pure systems or as stand-alone unit Easily attaches to existing B-pure system Inlet specifications: connection: 1/2" NPTP; maximum inlet pressure: 100 psig;…

The Barnstead LabTower EDI system delivers up to 200L/day of Type 1 ultrapure water (18.2 megohm) or Type 2 pure water (10-15 megohm) from a tap feed water supply. Water product quality exceeds international standards ASTM Type 1 with a resistivity of 18.2 megohm and TOC 1-5ppb with…

Remote Dispenser attaches easily to the Nanopure® system and allows water to be delivered up to 8 feet away from unit. Design virtually eliminates any dead volume and the coiled tube allows for easy use while taking up a minimal amount of space. Printer provides paper documentation of the unit…

Support Stand for converting wall-mounted WaterPro RO Station or WaterPro PS Polishing Station to bench-mounted. Rests on a countertop or other horizontal surface. Constructed of epoxy-coated steel. Includes hardware to mount WaterPro RO or PS to the stand. Dimensions (with WaterPro RO or PS…

Easy and economical high purity water Easy installation anywhere with hose or compression tubing Visual indicator of exhausted resin by color change High capacity compared to many other disposables - up to 1800 grains High flow rates up to 7.2 GPH Single or triple distillation water quality …

arium® mini plus Pre-treatment Cartridge Efficient purification via a combination of activated carbon, a catalyst and a downstream reverse osmosis membrane. Optimized adsorption of impurities through high-grade activated carbon Best removal of oxidation agents such as chlorine…

Consistent water quality Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity Compact mobile design …

Research II, IWT Ion Exchange Cartridges. Convenient, economical, high quality modular water filtration systems which operates on city water pressure and can be easily be expanded to fit most lab needs. No electricity required. Up to 18 megohm water quality can be achieved with these cartridges. …

A pre-assembled cartridge system that provides deionized water using a staged filtration process. Water purification is provided using a three-stage process.

Innovative Endure Purification Packs save you money The Geno takes RO water to the next level of purity, providing DI laboratory grade water in three convenient production rates of 10, 20 or 50 liters per hour. The  Geno combines all the latest technologies to produce DI water. The …

The RephiLe UV lamp is suitable for use in simplicity UV(SMART), synergy UV (SMART), direct-Q (SMART) Millipore systems. It is mainly used in research facilities and chemical laboratories while conducting critical experiments.