Agilent Technologies

Vials, Agilent Technologies

Compare Tool

Select up to 3 products

Sort
View
Show
  • Polypropylene Screw Caps with Septa

    Agilent Technologies

    Polypropylene screw tops are for wide opening screw top vials. Precision-fit septa provide an evaporation-proof seal.

  • Headspace Vials

    Agilent Technologies

    Beveled top for maximum secure seal Two neck lengths are available Flat or rounded bottom designs Beveled neck vials are available in both 10 mL and 20 mL capacities, flat or rounded bottom. The 20 mm crimp caps provide a consistently secure seal. Flat-bottom headspace crimp top glass vials…

  • Microvolume Inserts For Wide Opening Vials

    Agilent Technologies

    Transform Agilent vials from full-capacity to limited volume with one simple step. Inserts are compatible with Agilent wide opening screw top, crimp top and snap top vials. Conical Inserts with Polymer Feet (2714M52, N29, N42) With the correct default setting on an autosampler, these inserts…

  • Headspace Vial Convenience Kits

    Agilent Technologies

    20 mL flat bottom One-piece crimp caps with safety feature Choose either molded PTFE/Butyl Septa for applications <120°C or molded PTFE/Silicone Septa for applications >125°C.

  • Vial Racks

    Agilent Technologies

  • Screw Thread Glass Vials

    Agilent Technologies

    8-425 thread design Original, narrow neck size Uniformly flat bottoms ensure compatibility with inserts Vials are available with black caps and a variety of septa to meet your application needs. 2 mL 8-425 screw top glass vials (2714S22, S23, S61) Vials accommodate a…

  • Pre-Assembled, 2 mL Wide Opening Screw Top Glass Vial Convenience Packs

    Agilent Technologies

    Pre-assembled packs come ready-to-use with cap and septum of your choice attached to the vial. A time/labor-saving product for use on your Agilent Autosampler or any rotating tray automatic sampler.

  • Combi PAL and GC PAL Liquid Injection Vials and Caps

    Agilent Technologies

    Agilent provides a wide variety of micro and 2 ml vials and caps compatible with the Combi Pal and GC Pal listed in the Vials and Caps section. Below are the most popular vials and caps.

  • 20 mm Crimp Caps with Septa

    Agilent Technologies

    Line of pre-assembled crimp caps come with septa. Caps are ready to use with any headspace crimp top vials. Caps with safety feature release pressure at approximately 45 psi.

  • MS Analyzed Vial Kits

    Agilent Technologies

    Prevent unknown peaks impacting your results Save time and increase productivity with the first family of vials and closures to certify true LC/MS & GC/MS lot-specific testing results in a single package. All MS Analyzed Vial Kits are: Shipped with lot-specific Certificate of Analysis…

  • Septa

    Agilent Technologies

    For wide opening vials For use with screw caps Also called “red rubber”

  • Non-Assembled, 2 mL Wide Opening Screw Top Glass Vial Convenience Packs

    Agilent Technologies

    Screw Top Convenience Packs are an easy way to get 500 of each component using one catalog number. Packed in a six drawer, reusable, blue plastic cabinet, 500 screw top vials and screw caps with septa installed are kept handy and dust-free.

  • Wide Opening Crimp Top Vials

    Agilent Technologies

    40% larger opening than standard narrow opening vials 12 x 32 mm Tightly controlled crown for improved crimping Precision-formed neck designed for optimal robotic arm handling The wide opening crimp cap provides a larger taget area for improved autosampler needle accuracy. Select from four…

  • 6 mL Screw Top Vials, Caps and Septa for 1100/1200 Series Autosamplers

    Agilent Technologies

    Agilent minivials are designed to allow for reproducible injections of minute quantities, making your limited sample applications more effective and more accurate. Our microvials provide limited volumes for microsampling and the 6 mL capacity vial allows for larger sample injections.

  • Microvolume Inserts For 2 mL , 8-425 Screw Top Vials

    Agilent Technologies

    Conical Inserts with Polymer Feet Microvolume inserts transform vials from full-capacity to limited volume with one simple step. The inserts featured here are compatible with 8-425 screw top vials. Conical Inserts with Polymer Feet (2714S18) Polymer feet act as the inserts' shock absorber to…

  • General Purpose Sample And Storage Vials

    Agilent Technologies

    Ideal for sampling or storage applications Amber glass PTFE-lined storage caps offer broad chemical resistance. The polypropylene screw caps with PTFE/silicone septa are extra clean to eliminate sample contamination. Vials are shrink-wrapped and packaged in a handy container…

  • Snap Top Micro-V Vials

    Agilent Technologies

    Borosilicate glass 1.5 mL volume 12 x 32 mm Compatible with snap or crimp closures Designed for center needle during sample injection Not recommended for Vortex or in-vial sample concentration

  • Polypropylene Screw Caps with Bonded Septa

    Agilent Technologies

    The chemically inert, patented process produces a true bond at the molecular level of the septa and plastic cap, eliminating excess evaporation and providing a proper seal with the vial. Septa are completely secure and will not fall into the vial during injection. These caps are made with…

  • High Recovery Glass Vials

    Agilent Technologies

    Crimp top 1.5 mL capacity Wide opening 1.5 mL wide opening crimp top high recovery vials have a 30 µL reservoir. High recovery glass vials are for sample concentration and injection without transferring to microvolume inserts.

  • Polypropylene Vials

    Agilent Technologies

    Manufactured from virgin polypropylene, meeting requirements of 21 CFR 177.1520. Wide opening glass/plastic vials have a glass flanged insert molded to the inside, so sample only comes in contact with high quality glass insert and septum. Polypropylene is chemically resistant and the material of…

  • 2mL Wide Opening (9mm) Vials and Packs

    Agilent Technologies

    Agilent provides high quality CrossLab 2mL Wide Opening (9 mm) Screw Top Vials and Packs with optional ceramic write-on spots.

  • Screw Top Vials

    Agilent Technologies

    4 mL capacity 15 x 45 mm Custom fit for 7673,7683 and 6850 autosamplers Screw top 4 mL glass vials are a custom fit to the Agilent 6850 autosampler tray for use as sample as well as wash vials.  Vials with fill marks are also appropriate for use as wash vials and waste vials in 7673 and…

  • Vials Scrw Top Fixed Insert Clear

    Agilent Technologies

    Clear, screw top vial with fixed insert. 300 µL insert volume 100/pk

  • Round Bottom Headspace Vials

    Agilent Technologies

    Crimp top Use with 20 mm crimp caps Two sizes: 23 x 75 and 23 x 46 mm Round bottom glass headspace vials feature a 20 mm beveled crimp top that creates a much tighter seal than you get with a flat crimp surface. Vials are designed for use with Perkin-Elmer, Tekmar and Varian. …

  • Wide Opening Snap Top Vials

    Agilent Technologies

    40% larger opening than standard narrow opening vials 12 x 32 mm Use with any 11 mm snap or crimp cap Provides a total seal around the entire circumference of the vial crown The simple, efficient way to secure seal without crimping. Porivdes a consistently secure seal. A variety of snap…

  • 8-425 Screw Caps with Septa

    Agilent Technologies

    8-425 Screw Caps without Septa (2714S28) Open top polypropylene screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) …

  • 4 mL Screw Top Caps and Septa

    Agilent Technologies

  • Deactivated Wide Opening Screw Top Glass Vials

    Agilent Technologies

    2 mL volume 40% larger opening than standard vials Uniformly flat bottom Consistently secure seal Wide opening 12 x 32 mm vials are created using a deactivation process to eliminate sample interactions. Designed for use with autosamplers having rotating or robotic arm trays,…

  • Automatic Liquid Sampler Supplies

    Agilent Technologies

    Basic Supply Kit (2713N15) contains 10 ml syringes (6/ea), 23/26 gauge needles, 4 ml vials with diffusion caps (144/pk), 2 ml automatic sampler vials with screw caps (1,000/pk), GC septa (25/pk), and vial racks (5/pk).Basic Supply Kit Contains 10 ml syringes

  • Vials Crimp Top Amber w / Cap Ribber Sep

    Agilent Technologies

  • Screw Thread Micro-V Vials

    Agilent Technologies

    Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume.  Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of…

  • Crimping System And Heads

    Agilent Technologies

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.