Wilmad LabGlass

Tubing, Wilmad LabGlass

Compare Tool

Select up to 3 products

1 - 32 of 62
Sort
View
Show
  • 5mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Disposable NMR/EPR Tube Caps

    Wilmad LabGlass

    Disposable NMR Tube Caps are manufactured from molded PVC or Polyethylene depending on the tube OD. The different colors help track samples based on various reference solvents. When using Chloroform or Acetone as reference solution, please avoid (1) direct contact between the sample and the…

  • Economy Single Tube Solvent Jet Washer/Cleaner

    Wilmad LabGlass

    After fitting the washer to a filter flask, an inverted sample tube is inserted into the washer and solvent is introduced into the reservoir using a series of wash bottles. You can perform numerous wash steps and finish by pulling air through the tube to complete the procedure. Filter flasks…

  • Pyrex® NMR Capillary Tubes

    Wilmad LabGlass

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • 5mm O.D. Thin Walled Economy NMR Tubes

    Wilmad LabGlass

    Designed for routine use in all NMR spectrometers, Wilmad Economy NMR Tubes are guaranteed to fit tightly in any spinner turbine and have zero NMR background. Best OD tolerance in the industry and a 30% thicker wall than any competitors' product Manufactured in an ISO 9001:2008 USA…

  • X-Band Economy Brand EPR Quartz Tubes

    Wilmad LabGlass

    Wilmad X-Band Economy Brand EPR Quartz Tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Tight ID and OD tolerances ensure 100% compatibility to spectrometers Individually wrapped to prevent contamination Comes with a cap

  • Thin Walled High Throughput NMR Tubes

    Wilmad LabGlass

    Wilmad Thin Walled High Throughput NMR Tubes have an average camber of 60 microns to guarantee the clarity of the spectrum for small molecule (MW<250) samples up to 600 MHz. Camber and concentricity values listed are the Total Indicator Reading (TIR) Designed for routine use in most…

  • 8mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Universal Inlet Adapters with Screw Cap

    Wilmad LabGlass

    Borosilicate glass universal inlet adapters are capable of sealing thermometers, syringes, pipets, etc. Insert probes can be positioned within the apparatus by loosening the screw cap on top of adapter and tightening to create a seal. Bottom of adapter features a Standard Taper joint. Supplied as a…

  • 10mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 3mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 5mm O.D. Ultra-Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 5mm O.D. Thin Walled Suprasil® NMR Tubes

    Wilmad LabGlass

    Wilmad Precision NMR Suprasil® (Synthetic Quartz) Tubes are manufactured from high purity synthetic fused silica materials with <0.005ppm Fe2O3 and outstanding optical characteristics in the deep UV to the near IR. Transmission rate from 190nm to 2600nm is well over 95% (10mm…

  • 5mm Screw-Cap NMR Tubes

    Wilmad LabGlass

    Commonly used in sample degasification these tubes can maintain vacuum quality of >10-4 torr. For better vacuum, please check our Pressure/Vacuum Tube and Quick Pressure Valve Tube. Tube comes complete with open top screw cap and septum. Caps and septa can be ordered separately.

  • X-Band Precision Brand EPR Quartz Tubes

    Wilmad LabGlass

    Wilmad X-Band Precision Brand EPR Quartz tubes are manufactured from naturally occurring quartz with the highest purity to minimize the background signal. Hold 10 to 15 times better tolerances on the inner diameter and 5 times smaller camber and concentricity vs economy brand tubes Ideal…

  • 13mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 15mm O.D. Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 12mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 7.5mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 4mm O.D. Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 5mm O.D. Thin Walled Quartz NMR Tubes

    Wilmad LabGlass

    Wilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…

  • Bruker SampleJet NMR Tubes

    Wilmad LabGlass

    Authentic Bruker® SampleJet® cap without code, up to 600 MHz. Do not use with Ceramic spinners.

  • 5mm O.D. Medium Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 5mm O.D. Step-Down Ultra-Thin Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • 5mm O.D. Heavy Walled Precision NMR Tubes

    Wilmad LabGlass

    To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Omni-Fit Valve NMR System

    Wilmad LabGlass

    The Wilmad Omni-Fit NMR valve system is designed for easy injection of samples through a gas-tight syringe without the need for a glove box in anaerobic applications. Omni-Fit valve (OFV) is a complete accessory set Comprised of a 5mm end cap, 2 way valve, septum with cap, barrel…

  • Rotor and Caps for Bruker® MAS Probe

    Wilmad LabGlass

    Manufactured from the highest purity Zirconia, Wilmad MAS Rotors provide the ultimate solution for analysis of solid samples. Caps fitted with O-rings for improved sealing MAS Probe and caps are 100% compatible for most solid state NMR spectrometers Thoroughly inspected before and…

  • Multi-Tube Jet Solvent NMR/EPR Tube Washer and Dryer

    Wilmad LabGlass

    Wilmad’s 2nd generation Multi-Tube Jet Solvent Washer/Dryer is recommended for research labs that routinely clean NMR and EPR tubes; a single unit can accommodate up to 5 tubes (3, 4 and 5 mm OD) at once. When an inverted tube is inserted onto the solvent transfer tubing and the open end is…

  • 10mm O.D. Thin Walled Quartz NMR Tubes

    Wilmad LabGlass

    Wilmad Precision NMR Quartz Tubes have an extremely low thermal expansion rate and high tensile strength which is 14 times more robust during the cooling/heating process than Type 1 Class A glass tubes. Naturally occurring quartz maintains an over 85% transmission rate (10 mm thickness,…

  • Susceptibility Matched Shigemi® Tubes

    Wilmad LabGlass

    Shigemi tube features a susceptbility matched bottom and plunger for each of the following solvents: CDCL3 CD3OD D2O DMSO-d6 This feature would effectively reduce the boundary gradients at the edges of the coil. Therefore, it is no longer critical to keep the general NMR sample…

  • Low Pressure/Vacuum Suprasil® EPR Tubes

    Wilmad LabGlass

    Wilmad’s low pressure/vacuum (LPV) Suprasil tube is ideal for anaerobic and gas-tight EPR experiments, and offers a convenient flame-free sealing solution for air sensitive or volatile liquid samples. Robust sealing system allows pressure build-up inside the sample Greaseless PTFE…

  • Pressure Vacuum Valve NMR Tubes

    Wilmad LabGlass

    Wilmad’s Pressure Vacuum Tube is the most reliable NMR tube on the market for medium range pressure (<300 psi) and ultra vacuum (10-8 torr) experiments. Connect to a 1/8" metal (SST or brass) vacuum line using Swagelok® fittings Pressure vacuum valve is made of PTFE,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.