Compare Tool

Select up to 3 products

1 - 32 of 327
Sort
View
Show
  • Red Extruded Vacuum Tubing

    Thomas®

    Flexible, smooth-walled tubing High-quality gum rubber Cartons contain 48 to 50 feet (14.6 to 15.2 m). Listings indicate i.d. x o.d. x wall thickness in inches. Tubing is 10 ft per pack and 50 ft per carton.

  • 180 Clear Plastic PVC Tubing

    Thermo Scientific Nalgene

    Perform a range of non-medical applications with Thermo Scientific™ Nalgene™ 180 Clear Plastic PVC Tubing, which resists hardening and discoloration from a wide range of chemicals. Manufactured from the highest-grade resins and special plasticizers, this tubing is available in 50, 100,…

  • Capillary Glass Tubing

    Corning

    Borosilicate Glass In lengths of 4 ft. Cases contain 15 lbs. Number of lengths stated per case is approximate 6.5 ±0.4 and 7.5±0.4 mm size tubing are each offered in two bore sizes as shown in table

  • 180 Clear Plastic PVC Vacuum Tubing

    Thermo Scientific Nalgene

    Make practical and efficient use of Thermo Scientific™ Nalgene™ 180 Clear Plastic Vacuum Tubing, thick-walled PVC which can withstand a full vacuum (80mm Hg) at room temperature. Material is Food-Grade and complies with USP VI and USDA regulations. Listings show I.D. x O.D. x wall…

  • PYREX® Standard Wall Glass Tubing

    Corning

    Made of a low expansion borosilicate composition with high chemical resistance Meets all U.S. pharmacopoeia specifications for Type 1A glass 2 to 32mm O.D. sizes are 1219mm long ± approximately 6mm. 2 to 4mm O.D. have ends cut, while 5 to 32mm sizes have ends fire polished. 35 to…

  • Pure Latex Amber Autoclavable Rubber Tubing

    Smooth-walled, semi-transparent Pure, natural, rubber latex Made by dip process from virgin stock Strong and highly resilient Uniformly cured for superior resistance to aging and oxidation This non-toxic, autoclavable tubing has the flexibility and chemical-resistance…

  • Kimax, KG-33 Standard Wall Glass Tubing

    Kimble

    Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.

  • Filter Adapters

    Bal Supply

    These neoprene rubber adapter sets consist of seven cones designed to fit the Buchner and fritted glass funnels, porcelain filters without headpieces, and for reverse flow cleaning of filter crucibles. Especially useful for supporting funnels, Gooch crucibles, filter tubes, etc. in filtration…

  • Intramedic Lower Density Polyethylene Micro Bore Tubing

    BD

    Developed for medical applications Non-toxic Non-pyrogenic Non-reactive to tissue; non-radiopaque Contains no plasticizers or other additives Waxy, white, translucent, tasteless, odorless Lower density polyethylene micro bore tubing is flexible, but rigid enough for applications using…

  • Quick Couplings for Plastic Tubing

    Konstance Pneumatics

    Leak-free for semi-rigid or flexible tubing 1/16” to 3/8” id Reliable leak free plastic tubing connections Adds convenience to any fluid or gas handling system Simple one-hand operation Valve or straight through flow Use standard Delrin® acetal for mild chemicals. Use hose…

  • Thomas Rubber Vacuum Tubing

    A cloth-impression tubing of semi-pure gum Tubing is red Cartons contain 48 to 50 feet. Listings show i.d. x o.d. x wall thickness in inches. NOTE: Image might not represent exact model of product listed in clearance section.

  • Tygon Sanitary Silicone Tubing

    Saint Gobain

    Formulation 3350 for the sanitary transfer of sensitive fluids Ultra-smooth inner bore inhibits bacterial growth Minimal extractables help maintain fluid integrity Documented biocompatibility for sensitive applications Low adsorption improves fluid flow Meets USP Class VI,…

  • Thomas Rubber Tubing

    Thomas®

    Strong, flexible, extruded rubber latex Ideal for general laboratory use Smooth walls are of uniform thickness; meets Federal Specification  ZZ-T-831c, Types I, III, IV and V. Listings give i.d. x o.d. x wall thickness, in inches.

  • High vacuum tubing

    Fischer Technical

    Tubing with 2ea. hose clamps, 1/2"ID. For use with all Fischer Technical "LAV" series high vacuum pumps.

  • Tygon® S3™ E-3603 Laboratory Tubing

    Kimble

    This tubing is used for drain, vent, and general laboratory applications, and is specially formulated for resistance to flex-fatigue and abrasion. It has heavy walls to withstand a full vacuum, and may be used on a variety of glassware including filter flasks, condensers, and distillation adapters.…

  • Tygon S3™ E-3603 Laboratory Tubing for Vacuum Applications

    Saint Gobain

    Saint-Gobain Tygon S 3™ E-3603 Laboratory Tubing for Vacuum Applications Thick, non-collapsible wall for laboratory vacuum applications will not collapse under pressure Provides improved bend radius and higher working & vacuum pressure ratings Excellent clarity for process…

  • Teflon FEP Thin Wall Tubing

    Saint Gobain

    Translucent, flexible, non-contaminating, with very low permeability Usable to 205°C Highly resistant to chemicals Listings show bore x o.d. x wall thickness in inches. Supplied in 50’ (15.2 m) lengths.

  • Pyrex® NMR Capillary Tubes

    Wilmad LabGlass

    Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

  • Tygon S3™ E-3603 Laboratory Tubing

    Saint Gobain

    Saint-Gobain Tygon S 3™ E-3603 Laboratory Tubing Most consistently reliable tubing for laboratory applications Outstanding chemical resistance; non-oxidizing and non-contaminating Lot-to-lot consistency for reproducible results Smooth, polished inner wall The Only Choice for…

  • PYREX® Heavy Wall Glass Tubing

    Corning

  • Teflon® Thick Wall Heavy Duty Tubing

    Saint Gobain

    Translucent, non-contaminating, with very low permeability Offered in choice of Teflon® FEP or Teflon® PFA Teflon® FEP tubing is usable to 205°C. Teflon® PFA tubing is usable to 250°C. Listings indicate bore x o.d x wall thickness in inches. Case contains 50’ (15.2 m) of tubing. 

  • Braided Clear Tubing

    Thermo Scientific Nalgene

    Braided PVC Tubing Nalgene 8005 Flexible, reinforced PVC tubing with high working pressure I.D., Nalgene catalog number, working pressure and one-foot markings printed on tubing Operating temperature: -21 to 82°C Can be gas or chemically sterilized Box contains…

  • Quick Disconnect Tubing Couplings

    Thermo Scientific Nalgene

    High-density polyethylene Friction-fitting members form a readily demountable joint for connecting flexible tubing Quick disconnect tubing couplings provide a safe, convenient means for rapid attachment and disconnection of filtering flasks, manometers, etc. Each member has a heavy flange for…

  • 689 Polypropylene Tubing

    Thermo Scientific Nalgene

    3/8" I.D. x 1/2" O.D. x 1/16" Wall Max. Press. psig at 73°F; 23°C : 194 Max. Press. psig at 125°F; 52°C: 97 100 feet per case Food-Grade materials comply with 21 CFR 177.1520. for food packaging. Translucent. Excellent chemical resistance to many acids and alkalies. Unaffected by most…

  • Tygon® E-1000 Lab Tubing

    Saint Gobain

    Features/Benefits Soft and flexible for lab set-ups Low-temperature resistant for low level cryogenic applications Resistant to corrosive chemicals for laboratory applications Low durometer for use in low-torque pump applications Meets FDA requirements for food contact …

  • Tygon® Ultra Chemical-Resistant Tubing

    Saint Gobain

    Tygon® Ultra Chemical Resistant Tubing offers an unequaled combination of chemical resistance, clarity and flexibility. Tygon® Ultra Chemical Resistant Tubing is virtually unaffected by acids, bases, ketones, salts and alcohols, fitting the requirements of many applications from battery acid…

  • Tygon® S3™ E-3603 Non-DEHP Tubing

    Saint Gobain

    Phthalate-free Tubing for Food & Beverage Dispensing Tygon S3™ E-3603 from Saint-Gobain Performance Plastics is now phthalate-free. Saint-Gobain is proud to be among the first companies to offer sustainable, flexible tubing products. The bio-based Tygon S3 line combines the high…

  • Valved Barbed Quick Disconnects

    Thermo Scientific Nalgene

    Maintain the integrity of your transfer liquids using Thermo Scientific™ Nalgene™ Valved Barbed Quick Disconnects. The barbed fitting on each end and internal valve in the middle, which seals when the fittings are removed, are ideal for use in developing in-house fluid transfer systems.…

  • Tubing 9mm od 2.0mm Wall

    Corning

    This PYREX® special wall tubing has an O.D. of 9mm and wall thickness of 2.0mm. It is 1219mm (48") long, ± approximately 6mm (¼") with ends cut and glazed or fire polished.

  • Polypropylene Y-Shape Tubing Connectors

    Thermo Scientific Nalgene

    With ringed divergent arms for attachment of tubing Autoclavable Outer diameter of arms is given in listings.

  • Lattice Connectors

    Bal Supply

    These slotted lattice connectors are made of cast aluminum with a smooth round surface for connecting lattice rod supports for laboratory apparatus. These spherical designed connectors assure rigidity, solidity and freedom from breakage. The U-shaped slots on each side take standard ½ inch rod and…

  • Tubing, Tygon

    Hach

    Chemical-resistant, Formula R-3603 Tygon tubing with flex strength greater than rubber. Unaffected by oxidizing agents and compatible with virtually any laboratory chemical. Bends readily to sharp radius curves and will maintain strong grip on glass or metal. Highly polished bore prevents interior…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.