Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…

Feature screw caps that provide a tight secure seal Sterile Attached cap with black silicone O-ring Withstands a maximum RCF of 20,000 x g

These Costar® low binding microcentrifuge tubes feature a bonded polymer technology that reduces protein and nucleic acid binding, resulting in better sample recovery. They are made of natural (uncolored) polypropylene and are certified RNase-/DNase-free. -Supplied nonsterile and are…

Screw cap, flat bottom, borosilicate glass (9215J30 and J50) Suitable for tissue culture and routine bacteriological work Flat bottom allows tube to stand unsupported 9215J30 tube takes size 15-415 cap; case of 1,000 contains four packages of 250 9215J50 tube takes size 18-415…

As supplied with 9212K21 series test tubes, with Teflon over-liner Cap size shown is GPI thread-finish

Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C. Caps are provided with a white rubber liner.

These heavy duty 10mL PYREX® conical centrifuge tubes are made with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length limitations imposed by centrifuge rotors and supports, it has been necessary to reduce the capacity of these…

Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

Axygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…

Widely used and referenced in laboratory protocols      Dual position snap-cap prevents sample loss with ease of handling      Sterile, nonpyrogenicity tested to less than 0.1 EU/mL (Cat. No. 352008 nonsterile)   The foundation for consistent research…

These 7x280mm PYREX® capillary tip bleed tubes are for bleeding gases, steam or liquids below the liquid surface of sidearm distillation flasks. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K.

Axygen® 1.1mL 96 well Mini tubes are designed to fit an ANSI/SLAS 1-2004: Microplates - Footprint Dimensions compatible rack and are designed to be sealed with 8-strip or 12-strip plug caps. Available in 0.65mL single MiniTube or 1.1mL single MiniTube and 8-tube or 12-tube strip…

These PYREX® replacement tubes fit the Kuderna Danish Apparatus and have an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2mL in 0.1mL increments and from 3mL on in 1.0mL increments.

These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold…

0.2mL PCR tubes (assorted colors) are made of thin wall polypropylene and designed for precise fit in heat blocks to optimize heat transfer With domed cap for efficient heat transfer Nonsterile and certified DNase- and RNase-free Autoclavable at 121°C and will withstand…

Beaded rim These test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25mm tube does not have a marking spot.

These 15mL PYREX® conical centrifuge tubes have white enamel graduations. The 15mL sizes are graduated upward from tip in 0.1mL divisions.

A faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues      Consistently obtain a more uniform single-cell suspension      Three nylon mesh pore sizes for optimal performance in a…

Skirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached

The Axygen® 1.5 mL self-standing screw cap micro centrifuge tube in blue, is made of high quality polypropylene material.

Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy. The durable, white enamel scale…

Features and Benefits Polypropylene tube with large marking spot to clearly identify tube contents and experimental parameters Polypropylene cap with 4 vents; hydrophobic membrane provides gas exchange Sterile, nonpyrogenic and RNase-/DNase-free .

Pear-Shaped In accordance with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to…

These 12mL heavy-duty PYREX® conical centrifuge tubes have durable white enamel graduations and are made to the same O.D. and length specifications as No. 8060, but with increased wall thickness for greater mechanical strength. In order to conform to outside diameter and overall length…

2619H22 Capacity 50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall…

Uniform glass distribution in the wall, taper and bottom of these 15mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of accuracy.

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

These 50mL PYREX® conical centrifuge tubes have sharp, black enamel graduations and markings. The tubes are the same size and shape as our Nos. 8060 and 8080. They have precision formed tips and uniform walls throughout for a high degree of accuracy and mechanical strength.

Without stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations:  from 1 to 5 mL in 1 mL   from 5 to 50 mL in 5 mL   from 50 to 100 mL in 10 mL divisions