Tubes, Blue
-
Flex Tubes® Microcentrifuge Tubes
EppendorfThe easy–open, easy–close design of the Flex Tubes® provides convenient, ergonomic, and reliable one-handed operation. Whether sample preparation, centrifugation or storage – the Flex Tubes® fit perfectly into your workflows! The easy-to-open, securely closing, Flex…
-
Falcon® Cell Strainers
CorningA faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissues Consistently obtain a more uniform single-cell suspension Three nylon mesh pore sizes for optimal performance in a…
-
Tube 10mL Self Stand Screw Cap
CorningSkirted, self-standing tubes with a conical bottom Graduated at 1.0mL intervals and feature a large frosted writing area Caps fit tubes securely for a leakproof seal Sterile tubes come with caps attached
-
50 mL Centrifuge Tubes and Caps
Caplugs Evergreen®50 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 50 mL tube with spork is also widely used in parasitology specimen transport. …
-
Snap-Cap Microcentrifuge Tubes
Bio PlasThe Snap-Cap Microcentrifuge Tube gives a firm, dependable seal, and its tough virgin-polypropylene construction withstands the rugged G-forces of high-speed centrifugation. Use it with confidence for specimen collection, mixing, electrophoresis sampling/ handling, enzyme assays, radioassays,…
-
G-Tube Microcentrifuge Tube
Bio PlasNo special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…
-
-
5.0mL ClickLok™ MCT with insert cavity snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.
-
30 mL Centrifuge Tubes and Caps
Caplugs Evergreen®30 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport. …
-
2.0mL SuperClear® Polypropylene snap cap microcentrifuge tubes with graduations. Tubes have frosted side labeling surface and a thin membrane cap that can be pierced easily by a syringe. Resealable bag. Spins to 20,000 RCF. Autoclavable. (122°C) With flat attached snap caps, side…
-
Screw caps tubes and polypropylene caps
AlphaGem Bio, IncSuperior sealing with Patented Dual α Ring Seal technology, patent number D869275 Manufactured with ultra pure gasket seal materials in caps and medical grade ultra clear USP class 6 plastics for Tubes Double Start Threads provides greater thread contact area for superior strength…
-
-
Eppendorf Safe-Lock Tubes are the result of 50 years of continuous improvement and development. The original Safe-Lock tubes protect your sample with excellent centrifugation stability, feature perfect sealing properties, and reliably prevent sample evaporation. Trust in the original Eppendorf…
-
The Axygen® 1.5 mL self-standing screw cap micro centrifuge tube in blue, is made of high quality polypropylene material.
-
Screw-Cap Microcentrifuge Tubes
Bio PlasScrew-Cap Microcentrifuge Tubes The Screw-Cap tube is ideal for any sample-processing or storage application imaginable-and especially for working with valuable or hazardous cells and materials. The extraordinary strength, safety and reliability of the Screw-Cap tube lets you perform…
-
Microcentrifuge Tubes in Self-Standing Bags
Globe ScientificGlobe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…
-
Safeseal Microcentrifuge Tubes
SorensonGlass-like clarity allows easy viewing of sample and pellets. A positive seal design allows repeated cap closures that will not pop during boiling. All tubes feature external graduation marks and frosted writing surfaces. Available in natural and five additional colors. All Microcentrifuge tubes…
-
Made of polyethylene The unique design of the CapLock™ provides extra security against inadvertent cap openings on critical samples or during incubation above 80 °C.
-
17 mm outside diameter Plug type push-in caps are made of polyethylene for test tubes with outside diameters of 17 mm. Dual position caps can be closed but not sealed so that samples are maintained aerobic for microbiological procedures, or caps can be pushed tight and fully sealed for…
-
Bio Plas Microcentrifuge Tube
Bio PlasThese microcentrifuge tubes feature a flat top cap which provides a positive and secure seal when closed, thus providing maximum protection for contents. Fabricated with virgin polypropylene for excellent chemical resistant qualities and good clarity. These tubes have high impact strength and will…
-
Biologix SBS format tubes and racks designed specifically for high throughput screening. Purchase as tubes only, racks only, or as a tube/rack combo. 4 sizes available.
-
At any time the Color Coded Insert could be applied to the tube closure, which eliminates jeopardizing the integrity of your sample by transferring it to another vial. It is manually press fit and locks into place on top of closure.
-
Conical Centrifuge Tubes
SimportDisposable tubes are suitable for general centrifugation, urinalysis procedures and serum separation 15 mL polypropylene tubes Chemically clean Metal-free Tubes resist speeds of up to 5,000 rpm Ready-to-use and uniform in size and shape, measuring 17 x 120 mm. Graduations are at 0.25, 0.5,…
-
SnapTwist™ Micrewtube®
SimportTube made of polypropylene Cap made of polyethylene The SnapTwist™ Micrewtube® provides all the advantages of a modern microcentrifuge tube with screw cap but the closure is a true time saver. The SnapTwist™ Micrewtube® has a multitude of applications around your lab.…
-
5.0mL ClickLok™ MCT with snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.
-
Screw Top Micro Tubes, Opaque Caps (Cap Only)
Celltreat ScientificHigh temperature resistivity range – shatter/crack resistant and ideal for boiling Easy ¾ turn to open and close Translucent and Opaque Cap O-rings ensure leak-proof seal Translucent and Opaque Caps contain O-ring of easily visible contrasting color Caps are available in…
-
SuperSpin™ tubes feature an extra-thick and durable wall that can withstand centrifugation to 40,000 x G. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces that make this tube easy to…
-
Cell Strainers
Celltreat ScientificCELLTREAT® Cell Strainers can be used for many applications including isolating cells and removing clumps or debris. CELLTREAT Cell Strainers are compatible with CELLTREAT brand and other standard 50mL centrifuge tubes. The exclusive Pestle design improves manipulation of material in the…
-
Skirted, self-standing tubes with a conical bottom. Tubes are graduated at 1.0mL intervals and feature a large frosted writing area. Caps fit tubes securely for a leakproof seal. Sterile tubes come with caps attached. Transport tube comes with a blue cap Certified RNase, DNase, and…
-
Self-standing polypropylene transport tube comes with a blue cap Volume: 5mL; cap and tube material: virgin polypropylene Unassembled; non-sterile; autoclavable Provides a ‘leak-proof’ and reliable seal for critical sample storage Features a large, frosted writing area; …
-
Microcentrifuge Tubes
United Scientific SuppliesMade from high-quality virgin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted surface for easier writing. Autoclavable tubes…
-
1.7mL Capless SuperClear® Polypropylene Microcentrifuge Tubes without caps. Resealable bags. Not for vortexing. Without caps Includes side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) Polypropylene USP Class VI resin High…