Chemicals Standards S
-
-
VeriSpec™ Barium Standard for ICP/MS, 10 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Qualitative STEC Set
NSI Lab SolutionsA three sample set for qualitative identification of STEC. Set is designed to mimic typical FDA BAM and USDA MLG sample handling procedures. The PT set will contain one of the following: O26, O45, O103, O111, O121 or O145. The PT set can be used to rep
-
Actual Concentration: 1,000ppm ± 3ppm NIST Traceable
-
VeriSpec™ Chromium Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Nickel Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca Zirconium ICP Standard
Ricca ChemicalThe Ricca Chemical zirconium ICP standard with a composition of 94.30% water, 3.56% zirconyl chloride octahydrate and 2.14% hydrochloric acid, is suitable for use in wide range of industrial applications. It can be stored at a temperature of 15 to 30 degree C.
-
-
Solids CRMs
NSI Lab SolutionsOur solids CRMs are verified to work with the methods you use everyday. Easy to implement and use. There is no preparative step, simply shake the bottle well and measure an appropriate aliquot.
-
Sodium Kap Analysis Std
Thermo Scientific OrionTake reproducible ISE measurements with Thermo Scientific™ Orion™ ISE Calibration Standards. Sodium Known Addition Kit, for use with Sodium Ion selective electrodes 3 x 475 mL of 1 M NaCl standard with ISA and 1 x 475 mL ISA Standards are 1 pint (475mL) bottles
-
-
-
S.aureus NCTC10788/ATCC6538, 10/PK
NSI Lab SolutionsUnit Dose™ cultures are formulated to deliver less than 100 CFU per pellet. Directly inoculate media without dilution. Pellets dissolve instantly. Quantitatively validated and traceable cultures are Certified Reference Materials with downloadable Certi
-
VeriSpec™ Lead Standard for ICP/MS, 10 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
-
SV Internal Standard Mix
RestekConc. in Solvent and Volume: 2,000 µg/mL each in methylene chloride, 1 mL/ampul Compounds Acenaphthene-d10 (15067-26-2) Chrysene-d12 (1719-03-5) 1,4-Dichlorobenzene-d4 (3855-82-1) Naphthalene-d8 (1146-65-2) Perylene-d12 (1520-96-3) Phenanthrene-d10 (1517-22-2)
-
-
Solution-E6100DRC Setup/Stab/Masscal
PerkinElmerOur setup/stab/masscal solution is for use with the ELAN 6100 DRC for mass spectroscopy.
-
Silicon AA Standard, 1000 ppm Si, Na Metasilicate In Water
Ricca ChemicalFormula: Na2SiO39H2O Formula Weight: 284.20
-
StablCal® Turbidity Standard for all Turbidimeters. USEPA accepted for calibration purposes. StablCal® Stabilized Formazin Turbidity Standards are true Formazin dilutions developed for use in any turbidimeter. Precise, Pre-mixed Formazin Solutions StablCal is Safe to Handle…
-
Matrix: H2O Min: >= 995 Max: =< 1005 ppm Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Copper Standard for ICP/MS, 10 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca 10000 ppm K in 5% HNO3 Potassium ICP-MS Standard
Ricca ChemicalThe Ricca Chemicals potassium ICP-MS standard (10000 ppm potassium in 5% nitric acid) is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
VeriSpec™ Lithium Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Copper Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
S.enterica Abaetetuba NCTC8244
NSI Lab SolutionsA pure culture of S. enterica Abaetetuba, NCTC 8244, packaged in an easy to use inoculating swab stick. Simple snap valve design releases hydration fluid with a press of the plastic stem valve. Culture pellet supplied in Microgel-Flash quick dissolv
-
Concentration: 1,000 µg/mL Matrix: 2% HNO3 Volume: 500 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate …
-
ICP Standard, High Purty Elements manufactured in an ISO 9000 certified laboratory. Guaranteed to 0.3% tolerance.
-
VeriSpec™ Phosphorus Standard for ICP, 10 g/L in H2O
Ricca ChemicalMatrix: 96% H2O Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
SPEX CertiPrep Claritas PPT® standards are a class of Inorganic Certified Reference Standards designed specifically for today's new generation of trace ICP and ICP-MS instrumentation. Based on extensive development, our chemists have formulated this line of high-purity standards for user…
-
Matrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility