The Agilent Technologies holmium oxide filter is used for the elimination and removal of very fine and small particles that is normally not filtered through regular filter paper. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies neutral density filter kit is suitable for the purpose of minimizing the amount of light from entering the glass lens thus nullifying the effects of density. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Rectangular fluorescence cell, quartz, anaerobic, 10 mm pathlength, 3.5mL, 1/pk. Includes inlet tubing and a reservoir (1.5mL) joined to the cell using a ground glass joint, for collecting excess gas produced by anaerobic experiments. Evacuation tube is 4 mm ID, 6 mm OD and 30 mm long. Compatible…

The Agilent Technologies UV convenience kit comes with two open top UV quartz cell, 10 mm, 3.0 mL, 5061-3387 disposable polystyrene cells, 10 mm, 3.5 mL volume, 6610018800 cell tray with capacity for 16 cells, 5063-6577 lint-free lens cleaning paper, 9300-0761 and UV cell cleaning solution. This…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies power supply Y-adapter is made from strong and sturdy metal that offers good corrosion resistance thus enhancing the durability. This fitting provides a secure connection forming a leak-proof seal. This product is only available to U.S. Domestic Customers. For…

Until recently, flow-through cells had measuring chambers that were either rectangular or circular in shape. These shapes were dictated by limitations in the manufacturing process and did not offer the best geometry for clean flushing and reduction of contamination. Now Agilent has developed new…

The Agilent Technologies thumbscrews kit is suitable for use with Cary 4/5/6000 instruments. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies deuterium UV lamp is mainly used in the process of spectroscopy to maintain a continuous spectrum throughout. The low-pressure gas-discharge design ensures durability. This product is only available to U.S. Domestic Customers. For research use only, not to be used…

supplied with 1 PTFE stopper, Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies cell base is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

M6 threaded inlet and outlet ports, inlet/outlet tubes 400 mm length, z height 20mm. Compatible with Agilent Cary 100/300 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Magnetic stirrer bars, 6 mm long x 3 mm diameter, PTFE-coated, 10/pk. Suitable for use with spectrophotometer cells designed specifically to accommodate magnetic stir bars (such as p/n 6610015400). Application: For UV-Vis & UV-Vis-NIR, Suitable For Use With Spectrophotometer Cells Designed…

Matched pair, stoppered with PTFE stopper supplied. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Matched pair, stoppered with PTFE stopper supplied, Compatible with Agilent Cary Eclipse Fluorescence spectrophotometer. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies micro cell holder is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies neutral density screen is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Stoppered with PTFE stopper supplied, Top section of the cell features two self-masking black walls and two translucent side walls, z height 20mm, 1/pk. Compatible with Agilent Cary 50/60 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use…

The Agilent Technologies UV-Vis trans performance test kit is suitable for use with chromatography or spectrometry system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies UV instrument USP/EP qualification set is ideal for wavelength and photometric accuracy, stray light and resolution tests. Application: For Wavelength & Photometric Accuracy, Stray Light & Resolution Tests This product is only available to U.S. Domestic Customers. …

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Rectangular cuvettes (macro cells) are the most common type. They are compatible with virtually every UV system. Agilent offers a wide range of rectangular cells with optical path lengths from 1 mm to 100 mm. These cells have two clear windows, with adjacent windows frosted for easy handling. …

The Agilent Technologies temperature probe holder is suitable for use in rectangular micro-cells. Application: For Use in Rectangular Micro-Cells This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Matched pair, stoppered with PTFE stopper supplied, base thickness 12mm, self-masking black walls, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not…

The macro cell which is defined by DIN 58963 as a rectangular cell with an inner width greater than 5 mm has emerged as the standard for photometry. The most widely used macro cell is a rectangular cell with outer dimensions of 45 x 12.5 mm (height x width). The length of the cell is dependent on…

Fiber optic probes enable fast accurate measurements, improving your workflow and productivity, and eliminating the need for expensive cuvettes. Agilent offers a comprehensive range of fiber optic measurement probes, couplers, shields and tips for Versa/Dip probes used with Cary UV-Vis systems. …

The Agilent Technologies filter disc assembly is the most commonly used item that is used extensively in chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Quartz, rectangular aperture 6 x 3 mm, M6 threaded inlet and outlet ports, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. Application: For UV-Vis & UV-Vis-NIR Systems This product is only available to U.S. Domestic Customers. For…

The Agilent Technologies cuvette holder is suitable for use with external diffuse reflectance accessory (DRA) for Agilent cary 4000/5000/6000 UV-Vis system. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis This product is only available to U.S.…