Solvents, W

Compare Tool

Select up to 3 products

All Products

Solvents, W

1 - 32 of 61
Sort
View
Show
  • Water, ACS Reagent Grade, ASTM Type I, ASTM Type II

    Ricca Chemical

    Formula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Description: Packaged in plastic containers

  • Water, CHROMASOLV®, for HPLC

    Sigma-Aldrich

    Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.) Preparation Note: Product filtered through a 0.2 μm filter Legal Information: CHROMASOLV is a registered trademark of Sigma-Aldrich Laborchemikalien GmbH …

  • Cell Culture Grade Water

    Quality Biological

    Deionized, Ultra Pure, Endotoxin Free, Sterile QBI's Cell Culture Grade Water is high quality water for use as a solvent in the preparation of cell culture media and laboratory reagents. Available in many sizes to meet your needs, QBI's Cell Culture Grade Water for Cell Culture…

  • Sterile, Nuclease-Free Water

    Amresco

    AMRESCO’s sterile, nuclease-free water is prepared using diethylpyrocarbonate (DEPC) to ensure the removal of RNase contamination. Ideal for molecular biology applications. RNase-free Sterile Optimized for molecular biology applications Grade: Biotechnology …

  • OmniPur® Water, DEPC Treated Sterile Nuclease-Free

    EMD Millipore

    Formula: H2O Formula Weight: 18.02 CAS Number: Synonym(s): DEPC Water Description: General Product Use: Prepared with DEPC for RNA applications.

  • Water, ULTREX II Ultrapure Reagent

    Avantor - J.T.Baker®

    Formula: H2O Formula Weight: 18 CAS Number: 7732-18-5 Specific Gravity: 1L = 1.00 Kg

  • Water, BAKER ANALYZED LC/MS Reagent

    Avantor - J.T.Baker®

    For Use in Liquid Chromatography and Mass Spectrometry Formula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Specific Gravity: 1L = 1.00 Kg

  • Cell Culture Grade Water Tested to USP Sterile Water for Injection…

    Corning cellgro

    Wide range of applications in processes requiring high levels of sterility Meets WFI Standards Produced under the highest industry standards to ensure superior results This Water for Injection (WFI)-quality water meets United States Pharmacopeia (USP) testing…

  • HARLECO® Water, Deionized, Distilled, ASTM Type II

    EMD Millipore

    General Composition: Demineralized, distilled water containing less than 20ppm total solids and less than 0.3ppm iron. Equivalent to Type II reagent grade water. Formula: H2O Formula Weight: 18.02  

  • Water, HPLC

    Avantor - J.T.Baker®

    Formula: H2O Formula Weight: 18.00 CAS Number: 7732-18-5

  • Water, ACS/HPLC

    Honeywell Burdick & Jackson

    Suggested Applications: HPLC, Spectrophotometry Structural Formula: H2O CAS number: 7732-18-5 Hazard Class: Non-regulated Package Group: Non-regulated UN number: Non-regulated

  • Water, HPLC

    EMD Millipore

    Formula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5

  • Water, WFI Quality, Sterile Purified Water 0.1 µm filtered, Cell Culture Tested

    EMD Millipore

    Formula: H2O Formula Weight: 18.02

  • FLUKA Water, LC-MS CHROMASOLV®

    Sigma-Aldrich

    Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.) Analysis Note: number of particles ≥2μm reported Preparation Note: filtered through a 0.2 μm filter Legal Information: CHROMASOLV is a registered trademark of…

  • Water, LC-MS

    Honeywell Burdick & Jackson

    Suggested Applications: LC-MS, HPLC Structural Formula: H2O CAS number: 7732-18-5 Hazard Class: Non-regulated Package Group: Non-regulated UN number: Non-regulated

  • Bottled Water for Cell Culture

    EMD Millipore

    Ultrapure water tested for cell culture applications, delivered sterile, mycoplasma- and pyrogen-free.

  • SIGMA Water, sterile-filtered, BioReagent, suitable for cell culture

    Sigma-Aldrich

    Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000g/mLat 3.98°C(lit.) Application: For use in the preparation of cell culture media, and cell suspension and washing solutions. General description: This product is a very low…

  • Water For Analysis EMSURE®

    EMD Millipore

    Formula: H2O CAS No.: 7732-18-5 pH: (H2O, 20°C) neutral Molar Mass: 18.02 g/mol Boiling Point: 100°C (1013 hPa) Vapor Pressure: 23 hPa (20°C) Density: 1.00 g/cm3 (20°C) Hill Formula: H2O

  • Water, HPLC Grade

    Spectrum Chemical

    CAS Number: 7732-18-5 Molecular Formula: H2O Molecular Weight: 18.02 WATER, HPLC GRADE, is used in most HPLC mobile phases and in sample preparation. Because it dissolves most substances and is nontoxic, it is known as a Universal Solvent. To be used for HPLC analysis, it must…

  • DEPC Treated Water

    Quality Biological

    Nuclease and Endotoxin-Free, Sterile DEPC-treated water is certified nuclease-free and supplied in four bottles containing 1 L each to ensure sterility and inactivation of DEPC. It is rigorously tested for contaminating nonspecific endonuclease, exonuclease, and RNase activity, protease. …

  • Water, deionized water, ACS

    BeanTown Chemical

    CAS: 7732-18-5 EC No: 231-791-2 MDL No: MFCD00011332 Liquid Molecular Formula: H2O MW: 18.02 Melting Point: 0° Boiling Point: 100° Density (g/mL): 1 Refractive Index: 1.333

  • OmniTrace Ultra™ Water

    EMD Millipore

    Formula: H2O Formula Weight: 18.02 Description: Product is double-distilled and packed in class 100 clean room conditions into preleached LDPE bottles. Each LDPE bottle is packed in an EPS innerpack and then packed into a 1x regulated carton with a Certificate of Analysis.

  • Water, B&J Brand®

    Honeywell Burdick & Jackson

    Suggested Applications: HPLC, Spectrophotometry Structural Formula: H2O CAS number: 7732-18-5 Hazard Class: Non-regulated Package Group: Non-regulated UN number: Non-regulated

  • FLUKA Water, TraceSELECT®, for trace analysis

    Sigma-Aldrich

    Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.) Legal Information: Trace SELECT is a registered trademark of Sigma-Aldrich Co. LLC Packaging: 10lt in Bag-in-Box

  • OmniSolv® Water, Gradient Grade

    EMD Millipore

    Formula: H2O Formula Weight: 18.02

  • Buffered Peptone Water, Granulated

    EMD Millipore

    Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs Synonyms: Potassium Hydrogen Carbonate Formula: KHCO3 Formula Weight: 100.12 CAS Number: 298-14-6

  • Water, ACS Reagent Grade, ASTM Type I, ASTM Type II

    Ricca Chemical

    Formula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5

  • Water, AR (ACS)

    Avantor - Macron Fine Chemicals™

    (Distilled Water, Deionized Water) Formula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Specific Gravity: 1L = 1.00 Kg

  • FLUKA Water, for ion chromatography

    Sigma-Aldrich

    Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.)

  • DEPC Water

    Bio Basic Inc.

  • SIGMA Water, PCR Reagent

    Sigma-Aldrich

    Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.) Suitability: Suitable for polymerase chain reaction (PCR) Other Notes: Easily compare specifications for Water products with the Water specification table .

  • FLUKA Water, LC-MS Ultra CHROMASOLV®, tested for UHPLC-MS

    Sigma-Aldrich

    Formula: H2O Formula Weight: 18.02 CAS No.: 7732-18-5 Density: 1.000 g/mL at 3.98 °C(lit.) Legal Information: CHROMASOLV is a registered trademark of Sigma-Aldrich Laborchemikalien GmbH

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.