Solutions, S, 10 L
-
The LabChem 0.1N silver nitrate in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Concentration: 0.02N Composition: Water 99.16%, Sodium Thiosulfate Pentahydrate 0.70%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 Solubility…
-
The LabChem 0.025N sodium thiosulfate in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Ricca 50% (w/w) (760 g/L) Sodium Hydroxide
Ricca ChemicalThe Ricca Chemical sodium hydroxide is widely used in biochemistry industry and is useful for neutralization of acids. It is a basic solution and has the ability to raise pH of chemical solutions. This neutralization agent is perfect for use in the chemical industry, paper making, petroleum…
-
Titripac® - the Clever Pack
MilliporeSigmaNo contamination: Hermetically sealed pack Easy to use: Integrated withdrawal tap, direct connection to a titrator is possible Saves costs and time: No unnecessary titer determinations, no contaminated residual amounts Environmentally friendly disposal: Reduced package waste, as carton and…
-
Concentration: 1.2% w/v Composition: Water 98.77%, Sodium Tetraphenylboron 1.19%, Sodium Hydroxide 0.04% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: >7 Solubility Information: Miscible …
-
Ricca 1% (w/v) Starch Indicator
Ricca ChemicalStarch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…
-
Sodium Thiosulfate, 0.20N, Standardized
Reagents®Concentration: 0.2N Composition: Water 95.02%, Sodium Thiosulfate Pentahydrate 4.84%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: Approximately 100°C Density: 1.03 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 …
-
-
Ricca Simulated Gastric Fluid (without Pepsin)
Ricca ChemicalThis medium contains hydrochloric acid and sodium chloride, without Pepsin, and has a pH of 1.2. Although the medium addresses many of the qualities of gastric juice, there are some aspects that could be optimized.
-
Ricca 10% (w/v) Sodium Carbonate
Ricca ChemicalSodium carbonate refers to a family of inorganic compounds with the formula Na2CO3?, where x can range from 0 to 10. All forms are white, odorless, water-soluble salts that yield alkaline solutions in water. Historically, it was extracted from the ashes of plants grown in sodium-rich soils.
-
The LabChem 0.1N sodium thiosulfate in liquid form, is miscible with water. Application: For Laboratory and Manufacturing Use Only
-
Ricca Analytical Reagent Grade 40% (w/w) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Sodium Thiosulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 97.40%, Sodium Thiosulfate Pentahydrate 2.46%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 …
-
The LabChem 0.02N sulfuric acid in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
Titripur® Sulfuric Acid
MilliporeSigmaSynonyms: Sulfuric acid solution Molecular Formula: H2O4S Molecular Weight: 98.08 Linear Structural Formula: H2SO4 MDL Number: MFCD00064589 Density: 1.03 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
The LabChem 10.0N sodium hydroxide in liquid form, is soluble in water, ethanol and methanol. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 0.25N sodium hydroxide in liquid form, is non-flammable and odorless. Application: For Laboratory and Manufacturing Use Only
-
Ricca 50% (w/v) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP). Application: Suitable for Orsat Gas Analysis
-
Titripur® Sodium Thiosulfate Solution
MilliporeSigmaSynonyms: Antichlor Density: 1.01 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
Ricca 0.5% (w/v) Starch Indicator
Ricca ChemicalThe Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations
-
Sodium Thiosulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 97.54%, Sodium Thiosulfate Pentahydrate 2.46% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 Solubility Information: Miscible Shelf Life: 6…
-
The LabChem 1.0N sulfuric acid in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
TitriPUR® Sodium hydroxide solution
MilliporeSigmaMolecular Formula: HNaO Molecular Weight: 40.0 Linear Structural Formula: NaOH MDL Number: MFCD00003548 Density: 1.02 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
The LabChem 0.0141N silver nitrate in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Ricca 10% (w/v) (100 g/L) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
-
The LabChem 0.5N sodium hydroxide in liquid form, is non-flammable and odorless. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 0.1N sulfuric acid in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
Ricca 10% (w/w) Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Ricca 9% w/v Sodium Chloride
Ricca ChemicalSodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
-
LabChem 0.9% w/v Sodium Chloride
LabchemThe LabChem 0.9% w/v sodium chloride in liquid form, is miscible with water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only