Bel-Art Products

Compare Tool

Select up to 3 products

1 - 20 of 20
Sort
View
Show
  • Scienceware® Long and Short Handle Dippers

    Bel-Art Products

    HDPE dippers are chemical and corrosion-resistant. Firm 32 oz. sampling bowl is welded to a reinforced 29mm (1 1/8”) diameter, wood reinforced handle. The bowl is attached at a 45° angle for easier sampling from an elevated position. Safely gather samples from tanks, vats, lakes, and rail cars.

  • Scienceware® Ellipso-Spoon® Samplers

    Bel-Art Products

    The Ellipso-Spoon® Sampler has a specially curved shape that permits contact with all corners of bottles and containers preventing material loss. Crystals, powders, granulated and solid substances and thick liquids are easily retrieved. Autoclavable. Offset, deep spoon end retrieves…

  • Scienceware® Disposable Spoons, Sterile

    Bel-Art Products

    FDA-approved impact styrene Long handle for reaching into jars, bottles and other confined spaces Overall length 178 mm Nominal capacity given in listings Sterile, individually wrapped

  • Scienceware® Long-Handled Dippers

    Bel-Art Products

    For easy sampling from tanks, vats, lakes, etc. High-density polyethylene dippers Will not corrode or contaminate solutions With pouring spout Floats 'just in case' Dippers consist of a 500-mL high-density polyethylene beaker with pouring spout. A 1 1/8" diameter handle is welded at a…

  • Water Sample Dipper

    Bel-Art Products

    A 1000mL graduated polypropylene pitcher is fixed with a downward offset at the end of the handle, improving the ability to sample from an elevated position. Minimum handle length is 91cm (3 ft.) with adjustable length at fixed 15cm (6") intervals. Three-part handle can be disassembled for…

  • Scienceware® Large Sampling Spoon

    Bel-Art Products

    FDA grade white high-impact styrene, strong, rigid handle withstands pressure without breaking Large capacity for sample collection from wide mouth containers Sterile, individually packaged for single use Molded from sturdy, high-impact polystyrene, this spoon allows easy sample…

  • Scienceware® Churn Sample Splitters

    Bel-Art Products

    Mix and Divide a Water Sample into Subsamples for Testing Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis. Water sediment samples are poured into the sample splitter where they are composited into one…

  • Scienceware® Economy Dippers with Replaceable Cups

    Bel-Art Products

    For easy sampling from tanks, vats, lakes, etc. Lightweight and portable Two pouring spouts Strong, sturdy handles The 500-mL polypropylene cups have threaded fittings that screw into the handle. Two pouring spouts make it comfortable for both left-handed and right-handed…

  • Scienceware® Ladles

    Bel-Art Products

    Safely sample and dispense corrosive liquids High-denisity polyethylene ladles feature a rigid bowl with a 9" (23 cm) handle securely welded 30° from horizontal.

  • Scienceware® 3-Zone Powder Sampler

    Bel-Art Products

    Extract Samples at 3 Levels from One Container For proper sampling of powders, pellets and other friable materials which may become non-homogeneous in bags, this three zone sampler is invaluable. The steel point is inserted through the bag wall. When the sampler is in deep enough to cover the…

  • Scienceware® Needlepoint Sampler

    Bel-Art Products

    Minimize Damage When Taking Samples from Bags Especially useful for single samples from polyethylene or paper bags, the needle point sampler minimizes damage when taking samples. Pulls out with sample ready to be poured out of the hollow handle Enters a maximum of 28cm (11")…

  • Scienceware® Liquid Sampler

    Bel-Art Products

    Ideal for viscous liquids, this 50ml (1.65oz) liquid sampler is made for immersion into a can, bottle, tank, vat, etc. Nickel-plated brass cup and tubular handle with finger grips are 45cm (17-1/2") long Center rod with finger ring actuates a valve in the bottom of the cup for…

  • Scienceware® Earth-Friendly Long Handle Sampling Spoons

    Bel-Art Products

    Lessen environmental impact with these PLA (polylactic acid) resin sampling spoons. The production of 100% plant-based PLA contributes less greenhouse gasses and uses less nonrenewable energy from source to resin than its petroleum-based counterparts, and the plants used are an annually renewable…

  • Scienceware® Earth-Friendly 1001 Sticks – Non-Sterile

    Bel-Art Products

    Lessen environmental impact with these PLA (polylactic acid) resin sampling sticks. The production of 100% plant-based PLA contributes less greenhouse gasses and uses less nonrenewable energy from source to resin than its petroleum-based counterparts, and the plants used are an annually renewable…

  • Scienceware® Tapered Plug Sampler

    Bel-Art Products

    A smooth, tapered, stainless sampler for extracting a “plug” of material from bags or blocks of cheese, grease, soap, clay, etc. Sharp end of the satin finish sampler will cut through a bag or box Twisting the handle one-half turn will cut out a plug of material 15.2cm…

  • Scienceware® Sample Thief

    Bel-Art Products

    This hand controlled tool allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic…

  • Bellows Samplers

    Bel-Art Products

    Simple to use liquid sampler activates with one hand. Collection tubes are graduated to indicate collected volume. Polyethylene construction is chemical and corrosion resistant. Pack of 5.

  • Long-Handled Scraper

    Bel-Art Products

    Fiberglass handle ends with grooved handle for secure grip even with gloved hand. Dimensions: blade is 114mm x 178mm long (4-½" x 7"). Nylon scraper reduces chance of scratching glass and delicate surfaces. Blade is slightly bendable to keep tapered leading edge on surface. One rounded corner…

  • Scienceware® Earth-Friendly Wide Handle Sampling Spoons

    Bel-Art Products

    Lessen environmental impact with these PLA (polylactic acid) resin sampling spoons. The production of 100% plant-based PLA contributes less greenhouse gasses and uses less nonrenewable energy from source to resin than its petroleum-based counterparts, and the plants used are an annually renewable…

  • Scienceware® Safety Acid/Caustic Samplers

    Bel-Art Products

    Standard Precisionware® 500cc (16 oz.) polyethylene bottle (72mm, 2.8" diameter) threads on to end of rod to collect sample. Fluid enters through fitting above bottle. Ideal for sampling a variety of chemicals including: hydrochloric, sulfuric and acetic acid, formaldehyde potassium…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.