Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

Extra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

Each slot adapts to accommodate 12 - 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat…

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…

Keep single tubes upright in confined spaces Select among our three one-well racks--epoxy-coated steel wire racks, friction-fit polystyrene racks, or interlocking polypropylene racks. The autoclavable, epoxy-coated steel wire rack provides more friction with the benchtop for more secure…

Popular fraction-collector-plate style rack Easily fill and transfer 80 tubes in compact arrangement (5 x 16 array). Polypropylene rack has molded-in coordinates aid organization. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Measures 225 x 67 x 28 mm.

Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C). Autoclavable.

Dimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

Unique immobilizing tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy…

This innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…

Unique  tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve…

Link together multiple racks Create as large a rack as you need by linking together multiple racks. Heavyduty polypropylene racks feature a unique system of tabs and slots, that facilitate easy connection and sturdy fit. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Rack…

Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

Manufactured in a state of the art molding facility using high purity polypropylene. These workup PCR racks are easily stackable and can accommodate non-skirted, semi-skirted, and skirted 96 well PCR plates. It can also accommodate strip PCR tubes and have molded alphanumeric indexing for fast and…

Made of acetal polymer A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available…

labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations.  Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.

Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

Easy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…

Microtiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…

Polycarbonate racks feature ergonomic design for easy handling. Provides good chemical resistance. Autoclavable and withstands temperatures from -135°C to 135°C. Includes molded-in numbers and letters for easy identification of test tubes.

The 64 Well “Reversible” Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

Upright Drawer Freezer Racks Pre-Loaded With 2" White Freezer Boxes w/ Dividers.

Float in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique…

These RFID enabled racks specific for Captrack™ come pre-assembled with a unique RFID disk. After processing your samples with CapTrack™ these racks will allow the user to easily track their specimens to the appropriate cold storage location for fast and easy recall. These fully…

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

Produced from polypropylene (PP) Autoclavable Excellent rack for benchtop use or freezer storage.   Excellent chemical & temperature resistance   96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes   96 Well…

Autoclavable polypropylene (PP) Heavy-duty construction is durable and chemical resistant Multiple colors available for benchtop organization at a glance Versatile design accommodates different tube sizes on each side The four sides hold the following tubes: Eight – 50mL or 30mm…

Autoclavable polycarbonate (PC) rack for sample processing and short to medium term storage down to -80ºC Racks can be stacked or coupled with other racks to form a larger workstation Numeric markings for sample identification Dimensions (L x W x H): 260 x 60 x 50 (10.25" x…

Dimensions: 263 x 109.5 x 45mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows samples…