Racks, Green
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-Art50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…
-
Wireless Tube Racks, Half Size
Globe ScientificFully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
Abdos PCR
Foxx Life SciencesManufactured in a state of the art molding facility using high purity polypropylene. These workup PCR racks are easily stackable and can accommodate non-skirted, semi-skirted, and skirted 96 well PCR plates. It can also accommodate strip PCR tubes and have molded alphanumeric indexing for fast and…
-
96-Well Reversible Rack
Heathrow ScientificEasy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
labForce® Benchtop Tube Racks and Storage Boxes
labForce® (powered by Thomas Scientific)labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations. Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.
-
OneRack® Half-Size Delrin® POM Test Tube Racks
Heathrow ScientificExtra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…
-
Microcentrifuge Tube Racks
Caplugs Evergreen®Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format. One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes. Autoclavable racks are alpha-numerically…
-
Floating Foam Tube Racks
Heathrow ScientificFloat in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique…
-
4-Way Microtube Racks
Heathrow ScientificLink together multiple racks Create as large a rack as you need by linking together multiple racks. Heavyduty polypropylene racks feature a unique system of tabs and slots, that facilitate easy connection and sturdy fit. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Rack…
-
Poxygrid® "Half-Size" Test Tube Racks
SP Bel-ArtExcellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …
-
Pop-Up™ Rack
Heathrow ScientificClose flat for compact storage! Pop up for quick use! Simple, easy action to open and close – expand and collapse when racks are needed. Designed to help organize 15 and 50mL tubes. Imprinted grid aids quick retrieval. Stack racks in open or closed position. Saves space when racks are not…
-
Abdos Reversible Rack with Cover
Foxx Life SciencesReusable Micro centrifuge Tube Racks are manufactured in a state of the art molding facility using high purity virgin Polypropylene (PP). These racks hold a 12 x 8 array (96) of 1.5 and 2.0ml micro centrifuge tubes on one side with smaller positions (80) for the 0.5ml with a 16 x 5 array on the…
-
The MultiRack™
SimportMade of acetal polymer A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available…
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Unwire Half-Racks For 30 mm Test Tubes
Thermo Scientific NalgeneMolded of glass-reinforced polyketone No vinyl or epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and…
-
Switch-Grid™ Test Tube Racks
SP Bel-ArtThis innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…
-
Low Temp 96-Well PCR® Racks
Heathrow ScientificThe PCR Storage Rack, by Heathrow Scientific, offers a sleek and modern design that’s packed full of features. The patent pending design offers a unique lid the rack slides out from, and then rotates 180°, to become a convenient stand the rack sits on. Ergonomic textured finger grips…
-
Tube Rack
MTC BioThese compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…
-
Biotube System
SimportMicrotiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
CoolRack® and CoolSink™ modules
Azenta Life SciencesBioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…
-
80 Well Micro Tube Racks
Bio PlasThe 80 Well Micro Tube Racks are designed with 80 wells in a 16 x 5 configuration with each well numbered for convenient sample identification. Rack dimensions are 9"L x 2-1/16"D with a well diameter of 10.5mm. Available in 9 original colors plus 5 fluorescent colors, this assortment…
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…
-
80-Well Microtube Racks
Heathrow ScientificPopular fraction-collector-plate style rack Easily fill and transfer 80 tubes in compact arrangement (5 x 16 array). Polypropylene rack has molded-in coordinates aid organization. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Measures 225 x 67 x 28 mm.
-
Tube Rack
labForce® (powered by Thomas Scientific)These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…
-
Adapt-A-Rack®
Heathrow ScientificEach slot adapts to accommodate 12 - 30 mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat…
-
96-Well PCR® Racks
Heathrow ScientificRemovable hinged lid lies flat Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Available in natural, single colors, or assorted colors (one each of…
-
Clinical 4-Way Tube Racks
Heathrow ScientificThe Clinical 4-Way Tube Rack is the only tube rack specifically designed to hold round, flat & conical blood collection and culture tubes. It holds multiple tube sizes without multiple racks.