Purification & Additives
-
Toluene-4-sulfonic acid sodium salt for synthesis
MilliporeSigmaCAS Number: 657-84-1 Solubility: (20°C) soluble Molar Mass: 194.18 g/mol
-
DNA Elution Buffer
Zymo Research CorporationD3004-4-1: DNA Elution Buffer (1 ml) D3004-4-4: DNA Elution Buffer (4 ml) D3004-4-10: DNA Elution Buffer (10 ml) D3004-4-16: DNA Elution Buffer (16 ml) D3004-4-50: DNA Elution Buffer (50 ml)
-
Silica gel with indicator (orange gel), granulate ~ 1 - 3 mm
MilliporeSigmaSolubility: 1 g/l Melting Point: >1000°C
-
N-Lauryl sarcosine sodium salt (stabilised) for synthesis
MilliporeSigmaCAS Number: 137-16-6 UN Number: UN2811 Solubility: (20°C) soluble Melting Point: 45 - 47°C Molar Mass: 293.38 g/mol Bulk Density: 400 kg/m3 Flash Point: >150°C pH: 8 (30 g/l, H2O, 20°C)
-
Diethyl ether EMPLURA®
MilliporeSigmaCAS Number: 60-29-7 UN Number: UN1155 Solubility: 69 g/l (20°C) Melting Point: -116.3°C Molar Mass: 74.12 g/mol Boiling Point: 34.6°C (1013 hPa) Vapor Pressure: 587 hPa (20°C) Flash Point: -40°C Explosion Limit: 1.7 - 36 %(V) Density: 0.71 g/cm3 …
-
2-Hydroxy-3-methyl-2-cyclopentene-1-one for synthesis
MilliporeSigmaCAS Number: 80-71-7 Solubility: (20°C) soluble Melting Point: 104 - 107°C Molar Mass: 112.13 g/mol Flash Point: 100°C
-
(R)-(-)-Menthyl acetate for synthesis
MilliporeSigmaCAS Number: 2623-23-6 Molar Mass: 198.3 g/mol Boiling Point: 229.5°C Density: 0.925 g/cm3
-
Sodium molybdate dihydrate for synthesis
MilliporeSigmaCAS Number: 10102-40-6 Solubility: 840 g/l (20°C) Molar Mass: 241.95 g/mol Bulk Density: 1000 - 1400 kg/m3 pH: 9 - 10 (840 g/l, H2O, 20°C)
-
Molecular sieve 0.3 nm rods ~ 1.6 mm (1/16")
MilliporeSigmaCAS Number: 1318-02-1 Solubility: (20°C) insoluble Bulk Density: 700 - 750 kg/m3
-
Hydantoin for synthesis
MilliporeSigmaCAS Number: 461-72-3 Solubility: (20°C) slightly soluble Melting Point: 219 - 222°C Molar Mass: 100.08 g/mol
-
-
Giemsa's azur eosin methylene blue solution for microscopy
MilliporeSigmaUN Number: UN1230 Solubility: (20°C) soluble Boiling Point: >65°C Flash Point: 18°C Explosion Limit: 5.5 - 36.5 %(V) Methanol Density: 0.99 g/cm3 (20°C) Ignition Point: 455°C pH: 6.1 - 7.0 (H2O, 20°C) (undiluted)
-
Butyltinhydroxide-oxide for synthesis
MilliporeSigmaCAS Number: 2273-43-0 UN Number: UN3146 Solubility: (20°C) insoluble Molar Mass: 208.81 g/mol Boiling Point: >350°C Vapor Pressure: 1.47 hPa (20°C)
-
Methanol hypergrade for LC-MS LiChrosolv®
MilliporeSigmaLiChrosolv hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode). Thanks to their low level of ionic background and low ion suppression, LiChrosolv hypergrade solvents provide high…
-
Molecular sieve 0.3 nm beads ~ 2 mm
MilliporeSigmaCAS Number: 1318-02-1 Solubility: (20°C) insoluble Bulk Density: 700 - 750 kg/m3
-
YeaStar Genomic DNA Kit
Zymo Research CorporationThe YeaStar Genomic DNA Kit is designed for reliable and efficient isolation of genomic DNA from a broad spectrum of fungal species, including Aspergillus fumigatus, Aspergillus nidulans, Aspergillus nivens var. aureus, Candida albicans, Pichia pastoris, Saccharomyces cerevisiae,…
-
Methylamine (40% solution in water) for synthesis
MilliporeSigmaMelting Point: -40 C Density: 0.90 g/cm3 at 20 C
-
Zymoprep Yeast Plasmid Miniprep II
Zymo Research CorporationThe Zymoprep Yeast Plasmid Miniprep II provides all the necessary reagents for plasmid isolation from S. cerevisiae, C. albicans and S. pombe, and any fungi whose cell walls are susceptible to yeast lytic enzyme lysis. The procedure is simple and efficient, and there is no need for glass beads or…
-
CAS Number: 64742-49-0 UN Number: UN1268 Solubility: (25°C) insoluble Boiling Point: 107 - 137°C (1013 hPa) Vapor Pressure: 30 - 40 hPa (20°C) Explosion Limit: 0.8 - 6.5 %(V) Density: 0.728 g/cm3 (15°C) Ignition Point: 250°C Viscosity Kinematic: …
-
Zymoprep-96 Yeast Plasmid Miniprep
Zymo Research CorporationThe Zymoprep-96 Yeast Plasmid Miniprep kit provides all the necessary reagents for high-throughput plasmid isolation from S. cerevisiae, C. albicans, S. pombe and any fungi whose cell walls are susceptible to yeast lytic enzyme lysis. The Zymoprep-96 is a simple and efficient yeast…
-
GR ACS 5-Sulfosalicylic Acid, Dihydrate
MilliporeSigmaCAS Number: 5965-83-3 UN Number: UN2585 Molar Mass: 254.22g/mol Grade: Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs
-
(S)-(+)-2-Amino-3-methyl-1-butanol for synthesis
MilliporeSigmaCAS Number: 2026-48-4 UN Number: UN2811 Solubility: (20°C) insoluble Melting Point: 31 - 32°C Molar Mass: 103.16 g/mol Boiling Point: 91 - 92°C (13 hPa) Flash Point: 78°C Refractive Index: 1.4548 (20°C, 589 nm) Density: 0.93 g/cm3 (20°C)
-
n-Tetracosane for synthesis
MilliporeSigmaCAS Number: 646-31-1 Solubility: (20°C) insoluble Melting Point: 49 - 51°C Molar Mass: 338.65 g/mol Boiling Point: 391°C
-
Potassium-O-ethyldithiocarbonate for synthesis
MilliporeSigmaCAS Number: 140-89-6 Solubility: 1090 g/l (20°C) Melting Point: 209 - 214°C decomposes Molar Mass: 160.3 g/mol Bulk Density: 400 - 600 kg/m3 pH: 9 - 10 (100 g/l, H2O, 20°C)
-
2-Aminobenzothiazole for synthesis
MilliporeSigmaCAS Number: 136-95-8 Solubility: (20°C) insoluble Melting Point: 127 - 130°C Molar Mass: 150.2 g/mol
-
Ethyl salicylate for synthesis
MilliporeSigmaCAS Number: 118-61-6 Solubility: 0.25 g/l (20°C) Melting Point: 1.3°C Molar Mass: 166.17 g/mol Boiling Point: 232°C (1013 hPa) Vapor Pressure: 0.1 hPa (20°C) Flash Point: 100°C Explosion Limit: 1.1 %(V) Density: 1.13 g/cm3 (20°C)
-
Propiophenone for synthesis
MilliporeSigmaCAS Number: 93-55-0 Solubility: 2 g/l (20°C) Melting Point: 18°C Molar Mass: 134.17 g/mol Boiling Point: 214 - 218°C (1013 hPa) Vapor Pressure: 1.99 hPa (20°C) Flash Point: 85°C Refractive Index: 1.5258 (20°C, 589 nm) Density: 1.01 g/cm3 (20°C)