EMD Millipore

NEW! Organic Synthesis, EMD Millipore

Compare Tool

Select up to 3 products

All Products

EMD Millipore NEW! Organic Synthesis

1 - 32 of 540
Sort
View
Show
  • Thionyl Chloride For Synthesis

    EMD Millipore

    CAS No.: 7719-09-7 pH: (H2O) not applicable Solubility: (20°C) (rigorous decomposition) Melting Point: -104.5°C Molar Mass: 118.97 g/mol Boiling Point: 76°C (1013 hPa) Vapor Pressure: 121 hPa (20°C) Refractive Index: 1.517 (20°C, 589 nm) Density: 1.64 g/cm3 (20°C)

  • Acetic Anhydride For Synthesis

    EMD Millipore

    CAS No.: 108-24-7 pH: 3 (10 g/l, H2O, 20°C) Solubility: (20°C) Hydrolysis,Risk of violent reaction. Melting Point: -73°C Molar Mass: 102.08 g/mol Boiling Point: 138 - 140.5°C (1013 hPa) Vapor Pressure: 4 hPa (20°C) Flash Point: 49°C Explosion Limit: 2.0 - 10.2 %(V) …

  • Acetanilide For Synthesis

    EMD Millipore

    CAS No.: 103-84-4 pH: 5 - 7 (10 g/l, H2O, 25°C) Solubility: 5 g/l (20°C) Melting Point: 115°C Molar Mass: 135.16 g/mol Bulk Density: 370 kg/m3 Boiling Point: 304°C (1013 hPa) Vapor Pressure: 0.002 hPa (20°C) Flash Point: 173°C DIN 51758 Density: 1.22 g/cm3 (20°C) …

  • 2-Mercaptoethanol For Synthesis

    EMD Millipore

    CAS No.: 60-24-2 pH: 4.5 - 6 (500 g/l, H2O, 20°C) Solubility: (20°C) soluble Molar Mass: 78.13 g/mol Boiling Point: 154 - 161°C (1013 hPa) Vapor Pressure: 0.76 hPa (20°C) Flash Point: 68°C Refractive Index: 1.5006 (20°C, 589 nm) Explosion Limit: 2.3 - 18 %(V) Density: …

  • Boron Hydride Dimethylamine For Synthesis

    EMD Millipore

    CAS No.: 74-94-2 pH: 8 - 9 (10 g/l, H2O, 20°C) Solubility: 128 g/l (20°C) Melting Point: 33 - 36°C Molar Mass: 58.92 g/mol Bulk Density: 300 - 350 kg/m3 Vapor Pressure: Flash Point: 65°C Density: 0.73 g/cm3 (20°C) Ignition Point: 175°C

  • 2-(Diethylamino)-Ethanol For Synthesis

    EMD Millipore

    CAS No.: 100-37-8 pH: 11.5 (100 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: -70°C Molar Mass: 117.19 g/mol Boiling Point: 163°C (1013 hPa) Vapor Pressure: 1.9 hPa (20°C) Flash Point: 51°C Refractive Index: 1.4414 (20°C, 589 nm) Explosion Limit: …

  • Polyethylene Glycol 600 For Synthesis

    EMD Millipore

    CAS No.: 25322-68-3 pH: 5 - 7 (100 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: 17 - 22°C Molar Mass: 8000 g/mol Vapor Pressure: Flash Point: 260°C Density: 1.13 g/cm3 (20°C) Viscosity Kinematic: 14 - 17 mm2/s (20°C) (50% solution)

  • Diisopropylamine For Synthesis

    EMD Millipore

    CAS No.: 108-18-9 pH: 11.8 (6 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: -96°C Molar Mass: 101.19 g/mol Boiling Point: 83 - 84°C (1013 hPa) Vapor Pressure: 69 hPa (20°C) Flash Point: -17°C DIN 51755 Part 1 Refractive Index: 1.3915 (20°C, 589 nm) Explosion…

  • Polyethylene Glycol 20000 For Synthesis

    EMD Millipore

    CAS No.: 25322-68-3 pH: 4 - 7 (100 g/l, H2O, 20°C) Solubility: 500 g/l (20°C) Melting Point: 58 - 63°C Molar Mass: 20000 g/mol Bulk Density: 400 - 500 kg/m3 Vapor Pressure: Flash Point: 260°C Density: 1.2 g/cm3 (20°C) Ignition Point: >320°C

  • Phloroglucinol For Synthesis

    EMD Millipore

    CAS No.: 108-73-6 Solubility: 10 g/l (20°C) Melting Point: 217 - 220°C Molar Mass: 126.11 g/mol Bulk Density: 560 kg/m3

  • Polyethylene Glycol 6000 For Synthesis

    EMD Millipore

    CAS No.: 25322-68-3 pH: 5 - 7 (100 g/l, H2O, 20°C) Solubility: 500 g/l (20°C) Melting Point: 55 - 60°C Molar Mass: 8000 g/mol Vapor Pressure: Flash Point: 250°C Ignition Point: 420°C Viscosity Kinematic: 200 - 250 mm2/s (20°C) (50% solution)

  • Polyethylene Glycol 400 For Synthesis

    EMD Millipore

    CAS No.: 25322-68-3 pH: 5 - 7 (100 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: 4 - 8°C Molar Mass: 8000 g/mol Boiling Point: >200°C (1013 hPa) Vapor Pressure: Flash Point: 240°C Density: 1.13 g/cm3 (20°C) Ignition Point: 360°C DIN 51794 Viscosity…

  • Phosphorus (Red) (Stabilised) For Synthesis

    EMD Millipore

    CAS No.: 7723-14-0 pH: 9.5 (100 g/l, H2O, 20°C) Solubility: (20°C) insoluble Melting Point: 590°C Molar Mass: 30.97 g/mol Bulk Density: 1100 kg/m3 Vapor Pressure: Density: 2.34 g/cm3 (20°C) Ignition Point: 260°C

  • Pyrrole For Pharma Synthesis, Non-GMP

    EMD Millipore

    CAS No.: 109-97-7 pH: >6 (10 g/l, H2O, 20°C) Solubility: 60 g/l (20°C) Melting Point: -24°C Molar Mass: 67.09 g/mol Boiling Point: 130 - 131°C (1013 hPa) Vapor Pressure: 8.7 hPa (20°C) Flash Point: 39°C Refractive Index: 1.5082 (20°C, 589 nm) Explosion Limit: …

  • N,N-Dimethylbenzylamine For Synthesis

    EMD Millipore

    CAS No.: 103-83-3 pH: 10 (10 g/l, H2O, 20°C) (saturated solution) Solubility: 8 g/l (20°C) Melting Point: -75°C Molar Mass: 135.21 g/mol Boiling Point: 180 - 183°C (1013 hPa) Vapor Pressure: 2.4 hPa (20°C) Flash Point: 55°C Refractive Index: 1.5011 (20°C, 589 nm) …

  • Isopropyl Myristate For Synthesis

    EMD Millipore

    CAS No.: 110-27-0 Solubility: Molar Mass: 270.45 g/mol Boiling Point: 140°C (3 hPa) Vapor Pressure: Flash Point: >150°C Refractive Index: 1.434 (20°C, 589 nm) Density: 0.85 g/cm3 (20°C) Ignition Point: >300°C Viscosity Kinematic: 6.57 mm2/s (20°C)

  • Styrene (Stabilised) For Synthesis

    EMD Millipore

    CAS No.: 100-42-5 Solubility: 0.24 g/l (20°C) Melting Point: -31°C Molar Mass: 104.15 g/mol Boiling Point: 145°C (1013 hPa) Vapor Pressure: 6 hPa (20°C) Flash Point: 31°C Refractive Index: 1.5458 (20°C, 589 nm) Explosion Limit: 1.1 - 8.9 %(V) Density: 0.906 g/cm3 (20°C) …

  • Polyethylene Glycol 300 For Synthesis

    EMD Millipore

    CAS No.: 25322-68-3

  • Aniline For Synthesis

    EMD Millipore

    CAS No.: 62-53-3

  • Cumene For Synthesis

    EMD Millipore

    CAS No.: 98-82-8 pH: (H2O) not applicable Solubility: 0.05 g/l (20°C) Melting Point: -96°C Molar Mass: 120.19 g/mol Boiling Point: 153°C (1013 hPa) Vapor Pressure: 5.3 hPa (20°C) Flash Point: 0.8 - 6.0 %(V) Refractive Index: 31°C Density: 0.86 g/cm3 (20°C) Ignition…

  • Ethyl Acetoacetate For Synthesis

    EMD Millipore

    CAS No.: 141-97-9 pH: 4.0 (110 g/l, H2O, 20°C) Solubility: 116 g/l (20°C) Melting Point: -40°C Molar Mass: 130.14 g/mol Boiling Point: 180.0°C (1013 hPa) Vapor Pressure: 1 hPa (20°C) Flash Point: 65°C Refractive Index: 1.419 (20°C, 589 nm) Explosion Limit: 1.0 - 54 %(V) …

  • Dl-Limonene (Mixture Of D- And L-Form Ca.1:1) For Synthesis

    EMD Millipore

    CAS No.: 138-86-3 Solubility: (20°C) insoluble Melting Point: -89°C Molar Mass: 136.24 g/mol Boiling Point: 178°C (1013 hPa) Vapor Pressure: 2.1 hPa (20°C) Flash Point: 43°C Explosion Limit: 0.7 - 6.1 %(V) Density: 0.84 g/cm3 (20°C) Ignition Point: 255°C

  • Tween® 80 For Synthesis

    EMD Millipore

    CAS No.: 9005-65-6 pH: 5 - 7 (50 g/l, H2O, 20°C) Solubility: (20°C) soluble Boiling Point: >100°C (1013 hPa) Flash Point: >149°C Density: 1.07 g/cm3 (25°C) Ignition Point: >180°C Viscosity Kinematic: 300 - 500 mm2/s (25°C)

  • Nitroethane For Synthesis

    EMD Millipore

    CAS No.: 79-24-3 pH: 6 (1 g/l, H2O, 25°C) Solubility: 45 g/l (20°C) Melting Point: -90°C Molar Mass: 75.07 g/mol Boiling Point: 114°C (1013 hPa) Vapor Pressure: 20 hPa (20°C) Flash Point: 29°C Refractive Index: 1.3917 (20°C, 589 nm) Explosion Limit: 3.4 %(V) Density: …

  • Vanillin For Synthesis

    EMD Millipore

    CAS No.: 121-33-5 pH: 4.3 (10 g/l, H2O, 20°C) Solubility: 10 g/l (25°C) Melting Point: 82°C Molar Mass: 152.14 g/mol Bulk Density: 600 kg/m3 Boiling Point: 154°C (13 hPa) Vapor Pressure: 0.0029 hPa (25°C) Flash Point: 153°C Density: 1.06 g/cm3 (20°C) Ignition Point: >400°C

  • Aluminium Chloride Anhydrous Powder Sublimed For Synthesis

    EMD Millipore

    CAS No.: 7446-70-0 pH: 2.4 (100 g/l, H2O, 20°C) Solubility: 450 g/l (20°C) (decomposition) Melting Point: 180 - 181°C (sublimed) Molar Mass: 133.34 g/mol Bulk Density: 1200 kg/m3 Vapor Pressure: 1 hPa (20°C) Density: 2.44 g/cm3 (20°C)

  • Di-Phosphorus Pentasulfide For Synthesis

    EMD Millipore

    CAS No.: 1314-80-3 pH: 1 (10 g/l, H2O, 20°C) Solubility: (20°C) (decomposition) Melting Point: 284 - 287°C Molar Mass: 222.28 g/mol Bulk Density: 900 - 1100 kg/m3 Boiling Point: 513 - 515°C (1013 hPa) Density: 2.08 g/cm3 (20°C) Ignition Point: 142°C

  • BRIJ® 35 For Synthesis

    EMD Millipore

    CAS No.: 9002-92-0 pH: 5.5 - 7.0 (100 g/l, H2O, 20°C) Solubility: (25°C) soluble Melting Point: 36 - 42°C Molar Mass: 582.8 g/mol Bulk Density: 1050 kg/m3 Boiling Point: 100°C (1013 hPa) Vapor Pressure: Flash Point: >149°C Density: 1.05 g/cm3 (20°C)

  • Hydrazinium Hydroxide (About 100% N2H5OH) For Synthesis

    EMD Millipore

    CAS No.: 7803-57-8 pH: >12 (640 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: -51.7°C Molar Mass: 50.06 g/mol Boiling Point: 120.5°C (1013 hPa) Vapor Pressure: 20 hPa (20°C) Flash Point: 33°C Explosion Limit: >3.4 - 99 %(V) Density: 1.03 g/cm3 (20°C) …

  • Sodium Bromate For Pharma Synthesis, Non-GMP

    EMD Millipore

    CAS No.: 7789-38-0 pH: (H2O, 20°C) neutral,Aqueous solution Solubility: 364 g/l (20°C) Melting Point: 381°C (decomposition) Molar Mass: 150.89 g/mol Density: 3.3 g/cm3 (20°C)

  • O,O-Diethyl Dithiophosphate For Synthesis

    EMD Millipore

    CAS No.: 298-06-6 pH: 0.8 (100 g/l, H2O) Solubility: 330 g/l (25°C) Molar Mass: 186.23 g/mol Boiling Point: 105 - 108°C (20 hPa) Vapor Pressure: 0.66 hPa (57°C) Flash Point: 87°C Refractive Index: 1.512 (20°C, 589 nm) Density: 1.17 g/cm3 (20°C)

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.