Compare Tool

Select up to 3 products

All Products

MultiPhor Instruments

1 - 19 of 19
Sort
View
Show
  • Gel Punchers

    GE Healthcare

  • SDS Sample Application Strips

    GE Healthcare

    This strip is recommended for sample application on SDS gradient gels without preformed slots, e.g. ExcelGel SDS, gradient 8–18. Up to 26 samples can be applied and each well holds up to 40 µl of sample. The strip is made of transparent flexible silicone and is applied directly onto the gel surface.

  • EPH Electrode Wicks

    GE Healthcare

    Paper wicks are used for connecting the buffer solution with the gel.

  • NovaBlot Kit

    GE Healthcare

    This kit is used for electrophoretic transfer of proteins from polyacrylamide or agarose gels to an immobilizing membrane. The maximum gel size is 200 x 250 mm. By building transfer sandwiches, simultaneous transfer from several gels of the same type can be achieved. Up to six transfer…

  • IEF Electrode Strip

    GE Healthcare

    To maintain a stable gradient, filter paper strips soaked in electrode solutions are applied between the gel and the electrodes, an acid solution is used at the anode and a basic one at the cathode. Should, for example, an acidiv carrier ampholyte reach the anode, its basic moiety would become a…

  • IEF Sample Application Pieces

    GE Healthcare

    The 5 x 10 mm sample application piece made of Paratex can be used for sample volumes in the range 15–20 µl. The samples can be applied on the surface of the gels either by pipetting on pieces from cellulose-cotton, which are placed on the gel surface at the optimal pH location.

  • EPH Electrodes

    GE Healthcare

    The card-mounted EPH electrodes for electrophoresis using buffer chambers across the width of the cooling plate are moulded from polypropylene and support the platinum wire. The anode cable (red) and cathode cable (black) carry female pin connectors for attachment to the male pins at the front of…

  • Immobiline DryStrip Kit

    GE Healthcare

    This kit is used for running IEF with Immobiline DryStrip for the first dimension in 2-D electrophoresis. Twelve strips can be focused simultaneously under a protective layer of silicone oil. The high sample capacity allows the application of up to 100 µl on each. Immobiline DryStrip. Detailed…

  • Glass Plates

    GE Healthcare

    Polyacrylamide IEF gels can be cast in a cassette system. The cassette is made up by a glass plate with the film support and an U-frame, and is held together with clamps.

  • EPH/IEF Electrodes

    GE Healthcare

    EPH/IEF Electrode Cathode for Multiphor II (for buffer strips and electrode strips) consist of moulded polysulfone bars which support the platinum wire, held taut by stainless steel springs.

  • Mylar™ Sheets

    GE Healthcare

    Mylar Sheets are used for covering the sticky gel surface. The gels can be punched, filed and stored for several years without fading.

  • Pegg Elution Columns

    GE Healthcare

  • SDS and Native PAGE, IEF Kit

    GE Healthcare

    This kit is used for casting 0.5 mm homogeneous or gradient polyacrylamide gels. The gels are cast on a 1 mm thick glass plate (125 x 260 mm). Alternatively, casting can be done on GelBond™ PAGfilm (124 x 258 mm). Optional glass plates with U-frames allow casting of 1.0 and 2.0 mm thick gels.…

  • FilmRemover

    GE Healthcare

    FilmRemover is used for removing backing from a gel before electrophoretic transfer. Polyacrylamide or agarose gels with a thickness between 0.1 mm and 5.0 mm and a maximum gel size of 200 x 245 mm can be used. Detailed instructions for the use of FilmRemover are available in the instruction manual…

  • EPH/IEF Sample Application Foil

    GE Healthcare

    This application foil with narrow slits is recommended for electrophoresis and IEF in agarose gels. Up to 24 samples can be applied, with a sample volume of 2–4 µl in each slit. The foil is applied directly on the gel surface.

  • IEF/SDS Sample Application Strip

    GE Healthcare

    This applicator strip is recommended for use with PAGIEF gels, and SDS gradient gels without preformed slots, e.g. ExcelGel SDS, gradient 8–18. Up to 52 samples with a sample volume of 5–20 µl can be applied in each well. The applicator strip is made of flexible silicone and is applied directly on…

  • Multiphor™ II Buffer Strip Positioner

    GE Healthcare

    The Multiphor™ II Buffer Strip Positioner is a frame with slots that sits on top of an ExcelGel™ SDS gel on the Multiphor II cooling plate. The slots in the positioner facilitate placement of the buffer strips for electrophoresis and hold them securely in place. A locking cam secures…

  • Immobiline Sample Application Strips

    GE Healthcare

    52 samples 5-20 µl

  • Roller

    GE Healthcare

    The Roller is used for applying plastic support films onto glass plates with an interfacing fluid and to provide even pressure over a large area, ensuring adhesion with a minimum amount of fluid and elimination of bubble formation.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.