Moisture Determination

Compare Tool

Select up to 3 products

All Products

Moisture Determination

1 - 21 of 21
Sort
View
Show
  • HygroPal 23 AW Set

    Rotronics

    Perfect for the low budget laboratory, this set consists of a HP23-AW portable indicator with 2 probe inputs, one HC2-AW probe for the measurement of product samples, accessories and a carrying case. Battery operated portable indicator with two probe inputs for two simultaneous measurements…

  • Moisture Content Flask, Antibiotic

    Kimble

    Capacity: 2.2 mL Standard Taper joint: 10/10 Sample is weighed, transferred to the flask and placed in a vacuum oven where the sample is dried at 60°C with a pressure of 5 mm or less of mercury for three hours. The percent loss is then calculated. Method is defined in Code of…

  • Temperature and Humidity Meter

    Dawson Tools

    The DTM130 is a portable Temperature and Humidity Meter with large backlight LCD screen. Basic temperature measurements include ambient, dew-point and wet bulb. Relative humidity is also measured by the Meter. This DSM130 is ideal for both professionals and hobbyists. Measures: …

  • Moisture Meter

    Extech

    Unique dual LCD displays wall moisture and air temperature simultaneously Moisture content displayed on a relative scale Multi-position pins with safety storage of replaceable pins Easy to operate with selectable side switch (OFF, Test, and Calibrate) Data hold to freeze reading on display …

  • Moisture Tester

    Dawson Tools

    DSM170 is a material moisture, temperature, humidity all-in-one multi functions meter. The meter is ideal for measuring moisture of wood and concrete buildings. Measures: Relative Humidity Ambient Temperature Additional Features: LCD Display Max/Min Display …

  • HX204 Professional Level Moisture Analyzer

    Mettler Toledo

    Best performance for regulated industries Mettler Toledo has designed the HX204 Excellence Moisture Analyzer to meet the strict demands of research, quality control and production. With a resolution of 0.001%MC and excellent repeatability the HX204 meets the demands of applications requiring…

  • Pinless Moisture Psychrometer + IR Thermometer

    Extech

    Features: Quickly indicates the moisture content of materials with Pinless technology without damaging the surface; Remote Pin-type probe (MO290-P included) allows for contact moisture readings (3ft/0.9m cable length) Manually store/recall up to 20 labeled readings Works on multiple wood…

  • Thomas Traceable® Moisture Meter

    Thomas®

    Displays moisture content of wood, wood products, paper or other substances Range: 9.0 to 30.0% Resolution: 0.1%, accuracy ±4% NIST Traceable® Automatic and manual temperature compensation Jumbo sized digits (1 3/8” high) The meter’s memory contains nine material groups such as…

  • CRYETTE WR™ Automatic High Sensitivity Wide Range Cryoscope

    Precision Systems

    Laboratory Model Automatic Cryoscope for molecular weight, solution concentration, and freezing point depression determinations for aqueous and various solvent solutions for 2.0 mL samples, featuring: 10°C to +10°C Range with 12-position range selector for solvent optimization …

  • CRYETTE A™ Automatic High Sensitivity Dual Range Petroleum Cryoscope

    Precision Systems

    Laboratory Model Automatic Cryoscope for molecular weight, solution concentration, and freezing point depression determinations for aqueous and benzene solutions for 2.0 mL samples, featuring: Two selectable ranges: -2.0 to 0°C and +2.5 to +5.5°C Results displayed in m°C of…

  • Pinless Moisture Psychrometer + IR

    Extech

    8-in-1 Meter with Patented Built-in IR Thermometer Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage Remote pin-type probe…

  • Combination Pin/Pinless Moisture Meter

    Extech

    Quick Moisture Measurements on Wood and Building Materials Take quick Moisture measurements on wood and building materials with choice of pin or pinless (non-invasive) method. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal…

  • Moisture Trap

    Ace Glass

    For solvents heavier than water. Used in the method of quantitative separation and determination of glycol mixture by azeotropic distillation described in Analytical Chemistry, Vol. 29, No.1, Page 100. Capacity is 121/2mL, graduated in 0.1mL. Joints are standard taper 24/40.

  • Moisture Test Receiver, Barrett Type

    Ace Glass

    Used to determine the water content in petroleum and bituminous material. Similar to ASTM Type, except supplied with joints and stopcock to empty measuring tube during the determination. The 10 mL size is subdivided in 0.1mL from 0-1mL, 0.2mL from 1-10mL; 20mL size in 0.1mL from 0-1mL, 0.2mL from…

  • Moisture Test Receiver

    Ace Glass

    Used in phosphorus determination according to Ind. & Engr. Chem., Anal. Ed., Vol 9, page 524. Receiver capacity 5mL, graduated in 0.05 mL subdivisions. Upper joint is standard taper 24/40, side arm joint, standard taper 45/50.

  • Moisture Test Receiver, Pressure

    Ace Glass

    Moisture test receiver utilizes Ace-Thred bushings to achieve a 45psi @ 100 degrees C pressure rating when used in conjunction with Ace pressure reactors. Graduated receiver in 1ml subdivisions with PTFE bottom outlet stopcock. See also our 6024 series pressure condenser.

  • Moisture Test Receiver, with Overflow Line, Barrett Type

    Ace Glass

    Similar to 7745 but with overflow line to allow excess solvent to return to boiling flask. Used to determine the water content in petroleum and bituminous material. Similar to ASTM Type, except supplied with joints and stopcock to empty measuring tube during the determination. The 10mL size is…

  • Moisture Test Receiver, Recycle Type

    Ace Glass

    Especially useful when heavier than water solvents are employed. A 120 degree, 1:5 PTFE stopcock provides adequate shut-off in the intermediate position. Thermometer joint is 10/30.,/p>

  • Moisture Test Receiver, Dean & Stark

    Ace Glass

    Suitable for ASTM D 95 and E 123. Subdivided 0.1mL to 2.0mL and 0.2mL above 2mL.

  • Large Moisture Test Receiver, Barrett Type

    Ace Glass

    Large, 1L Barrett type moisture test receiver designed for use with large reactors. 45/50 joints and 60mm distance between the side arm and the body for easy clearance of spherical or cylindrical reactors. 2mm PTFE bottom stopcock and 10ml graduations.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.