3M Food Safety

3M Food Safety

Compare Tool

Select up to 3 products

1 - 32 of 57
Sort
View
Show
  • Petrifilm™ Aerobic Count (AC) Plate

    3M Food Safety

    The 3M™ Petrifilm™ Aerobic Count (AC) Plate is a ready-made  culture medium system that contains Standard Methods  nutrients, a cold-water-soluble gelling agent and an indicator  that facilitates colony enumeration. 3M Petrifilm AC Plates are  used for the…

  • Quick Swab

    3M Food Safety

    The 3M™ Quick Swab is a ready-to-use environmental swab system consisting of a five inch, rayon-tipped swab containing Letheen neutralizing buffer to facilitate recovery of bacteria. Benefits 3M™ Quick Swabs reduce labor required to prepare, gather and plate environmental…

  • Petrifilm™ E. coli/Coliform Count Plate

    3M Food Safety

    3M™ Petrifilm™ E. coli/Coliform Count (EC) Plates contain Violet Red Bile (VRB)  nutrients, a cold-water-soluble gelling agent, an indicator of glucuronidase activity,  and an indicator that facilitates colony enumeration. Most E. coli (about 97%)  produce…

  • Attest™ Biological Indicators and Test Packs for Steam

    3M Food Safety

    48 hour result (brown cap) and 24 hour result (blue cap) biological indicators and test packs for steam sterilization cycles Biological indicators that monitor the effectiveness of the steam sterilization process and provide results within 24-48 hours. Biological indicators provide the best…

  • Comply™ SteriGage™ Steam Chemical Integrator

    3M Food Safety

    An ANSI/AAMI/ISO 11140-1:2005 Class 5 Integrating Indicator for use in determining whether the sterilization process conditions were met inside each pack. Can be used in all 250-275°F sterilization cycles. As an internal pack monitor, the 3M™ Comply™ (SteriGage™) Class 5…

  • Enviro Swabs

    3M Food Safety

    Swab designed for collecting environmental samples on all types of food contact surfaces in the food industry. Benefits Ready-to-use swab reaches into corners and hard-to-reach areas for increased accuracy. Tamper-evident band indicates if the swab has been used. Convenient design…

  • Clean-Trace™ NG Luminometer

    3M Food Safety

    With the 3M™ Clean-Trace™ Hygiene Monitoring System, you can be confident that you’ll see clean. Our easy-to-use handheld device and  three-step process make testing  simple. When combined with our cutting-edge software, it’s a complete system you can rely on. Our…

  • Attest™ Biological Indicator Incubator

    3M Food Safety

    3M Attest Biological Indicator Incubator, 14-vial (round), 56°C steam, 120 nominal voltage required, 90-132V acceptable 3M Attest Incubator that provides optimal incubation conditions for the accurate readout of 3M™ Attest™ Biological Indicators. Since the growth of each test…

  • Petrifilm™ Environmental Listeria Plates

    3M Food Safety

    3M™ Petrifilm™ Environmental Listeria Plates are an AOAC®-RI method [Certificate # 030601] that detects the presence of indicator Listeria. It also provides quantitative results of Listeria species from environmental samples within 29±2 hours without any enrichment steps. …

  • Flip-Top Dilution Bottles

    3M Food Safety

    Convenient easy-to-use flip-top bottles of pre-mix dilutions. Benefits Hinged lid stays open for easy sample addition. Pre-mixed dilutions are ready for use with no additional blending required. Generous headspace and bottle opening size make sample addition easy. Leak…

  • Mini Flip-Top Vials Prepared Dilutions

    3M Food Safety

    3M™ Mini Flip-Top vials are pre-filled with 9 mL aliquots of diluent.

  • Swab-Samplers

    3M Food Safety

    Swab in pre-filled bottle with various diluents. Benefits Swab reaches into corners and hard-to-reach areas for increased accuracy. Convenient design helps improve sampling consistency from tech-to-tech and plant-to-plant. Bottles have ample headspace for sample addition and…

  • Petrifilm™ Aqua Heterotrophic Count Plates

    3M Food Safety

    3M™ Petrifilm™ Aqua Heterotrophic Count Plates provide fast, accurate results in enumerating heterotrophic bacteria in the bottled water industry. Benefits Utilizes the convenience and efficiency of the 3M™ Petrifilm™ Plate platform. Detects hetertrophic…

  • Petrifilm™ Yeast and Mold Count Plate

    3M Food Safety

    3M™ Petrifilm™ Yeast and Mold Count Plates identify food borne yeast and mold in your food products and in your food processing environment. Yeasts are easily differentiated from molds on the plate: - Yeasts are typically indicated by small, blue-green colonies with defined edges and…

  • Dilution Pouch with Butterfield's Buffer

    3M Food Safety

    The 3M™ Dilution Pouch with Butterfield's Buffer is a heavyweight, puncture-resistant pouch, ideal for many sample preparation and enrichment procedures. Designed to meet stringent laboratory testing needs, these bags have the strength needed to endure sample preparation and handling…

  • Clean-Trace™ Surface Protein (Allergen) Test Swab

    3M Food Safety

    3M™ Clean-Trace™ Surface Protein (Allergen) Test Swab ALLTEC60 is a rapid, simple, and reliable solution to monitor the presence of allergens on surfaces to effectively manage cleaning. It is a fast and easy way to check whether cleaning has been carried out to a satisfactory…

  • Petrifilm™ Staph Express Count Plates

    3M Food Safety

    3M™ Petrifilm™ Staph Express Count Plates provide confirmed Staphylococcus aureus results. Confirmed Staph. aureus appears as distinctive red-violet colonies. If you encounter high background flora in your staph testing, the 3M™ Petrifilm™ Staph Express Disk can be used…

  • Petrifilm™ Coliform Count Plate

    3M Food Safety

    3M™ Petrifilm™ Coliform Count (CC) Plates contain Violet Red Bile (VRB) nutrients, a cold-water-soluble gelling agent, and a tetrazolium indicator that facilitates colony enumeration. The top film traps gas produced by the lactose fermenting coliforms. U.S. Food and Drug…

  • Clean-Trace™ Biomass Detection Kit

    3M Food Safety

    Water test kit using ATP bioluminescence to detect overall biological load in a sample. Provides expanded flexibility over single shot devices, allowing sample clean up in cases of high quenching, particulates or fibres in aqueous samples. Best suited for laboratories and ideal for process…

  • Enrichment Pouches

    3M Food Safety

    Pre-mixed enrichment pouches, providing the right blend of premium nutrients and additives to ensure optimal organism growth. Benefits Flat bottom, stand-up pouch ensures stability when adding samples. Wire tie holds top open for easy sample addition and closes bag for transportation.…

  • Digital Heating Block, 120 V

    3M Food Safety

    3M™ Digital Heating Block 120V features a dry bath stainless steel chamber and aluminum block for rapid and even heating of samples. The high-watt heater is microprocessor controlled for precise temperature control. This heater is ideal for lab testing with the 3M™ Clean-Trace™…

  • Mit Gas Pack Anaerobe

    3M Food Safety

    Produces an environment of 20% CO2 and O2 for use in testing for Clostridium spp. Benefits Useful in testing for Clostridium species. Single-use packs. 20 anaerobic gas packs per case.

  • Petrifilm™ Rapid Yeast and Mold Count Plate

    3M Food Safety

    The 3M™ Petrifilm™ Rapid Yeast and Mold Count Plate method is faster and easier than the traditional agar method that requires a five-day incubation period. Yeast and molds can grow in a wide range of conditions in raw materials, finished products and production environments, making…

  • Petrifilm™ Aqua Coliform Count Plates

    3M Food Safety

    3M™ Petri?lm™ Aqua Coliform Count Plates are sample-ready media plates used to measure coliform levels in bottled water. 3M™ Petri?lm™ Aqua Coliform Count Plates deliver reliable testing results for your bottled water. Each plate contains a water-soluble gelling agent,…

  • Log Books

    3M Food Safety

    Record keeping log books for a variety of sterilization processes Benefits Preprinted log books put monitoring information at your fingertips

  • Petrifilm™ Aqua Yeast and Mold Count Plates

    3M Food Safety

    3M™ Petrifilm™ Aqua Yeast and Mold Count Plates are a sample-ready culture medium system which contain nutrients supplemented with antibiotics, a cold-water-soluble gelling agent, and an indicator that facilitates yeast and mold enumeration. These plates are used for the…

  • Petrifilm™ Rapid Aerobic Count Plates

    3M Food Safety

    3M™ Petrifilm™ Rapid Aerobic Count Plates (RAC) feature technology that facilitates colony enumeration in just 24 hours for most food matrices / environmental samples and resists distortion caused by spreader colonies. Aerobic count bacteria are present in a variety of food…

  • Clean-Trace™ Surface Protein Plus Test Swab

    3M Food Safety

    3M™ Clean-Trace™ Surface Protein Plus Test Swab PRO100 is a simple, quick, and reliable method of checking for the removal of protein residues after cleaning and quickly identifies contamination. This sensitive tool detects as little as 50µg of protein on surfaces. A quick,…

  • Petrifilm™ Aqua Enterobacteriaceae Count Plates

    3M Food Safety

    3M™ Petrifilm™ Aqua Enterobacteriaceae Count Plates are used for the detection of Enterobacteriaceae strains in bottled water. Enterobacteriaceae will appear as red colonies with yellow zones, red colonies with gas bubbles, or red colonies with yellow zones and gas bubbles. …

  • Petrifilm™ Enterobacteriaceae Count Plate

    3M Food Safety

    An indicator in the 3M™ Petrifilm™ Enterobacteriaceae Count Plate colors all colonies red. The top film traps gas produced by some bacteria. Acid-producing bacteria are  seen as red colonies surrounded by yellow zones. Bacteria producing gas and/or acid are considered to be…

  • Attest™ Monitoring Starter Kit

    3M Food Safety

    The Biological Indicator Starter Kit for steam includes: one roll 1322 Indicator Tape, one box 1262P Biological Indicators, a 116 Incubator, one bag 1243B Chemical Integrators, one 1266 Log Book and wall chart. The 3M Attest Incubator provides optimal incubation conditions for the accurate…

  • Petrifilm™ Salmonella Express Confirmation Disk

    3M Food Safety

    3M™ Petrifilm™ Salmonella Express Confirmation Disk for biochemical detection of Salmonella organisms. Benefits Confirmation disk easily added to plate for biochemical confirmation. Results in 4-5 hours.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.