Manifolds, Vacuum/Gas

Compare Tool

Select up to 3 products

HomeAll Products

Manifolds, Vacuum/Gas

1 - 32 of 41
Sort
View
Show
  • Double Vacuum Manifold

    Wilmad LabGlass

    This borosilicate glass Air-Tite vacuum gas manifold (Schlenk line) is designed with double oblique pressure/vacuum stopcocks with 4mm bores and a 16.2/56 plug size. The stopcocks simplify evacuation or pressurization with an inert atmosphere. Manifold is 1" O.D.

  • Stainless Steel Vacuum Manifold

    Advantec MFS

    1-place, 3-place, or 6-place Standard cup accepts No.8 or 8b stopper Choice of 2- or 3- way valves Vacuum manifolds allow filtration of multiple samples either at once or independently by controling the separate branch valves. The durable type 304 stainless steel can be used for…

  • Filter Holder Manifolds

    MilliporeSigma

    Vacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at…

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    Nalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…

  • Microfil Filtration System

    MilliporeSigma

    Microfil® system uses presterilized, ready-to-use funnels and mem/lianes on a patented filtration support, cost-effective. Convenient, easy to use system for well-accepted mem/liane filtration method conforms to international standards: CEN, Standard Methods, WHO Disposable,…

  • Vacuum Manifold Accessories

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds.

  • Visiprep™ SPE Vacuum Manifold, DL (Disposable Liner), 12-port model

    MilliporeSigma

    Patented screw-type valves within each SPE port for precise flow control Glass basin will not dissolve, fog, or discolor when exposed to solvents Legs on cover allow user to easily rest cover on work surface when removed from the manifold Screw-type solvent-resistant vacuum bleed gauge and…

  • Stainless Steel Extraction Manifold

    Advantec MFS

    1-place, 3-place, or 6-place Tapered branch accepts 40/35 female joint Choice of 2- or 3- way valves Vacuum manifolds allow filtration of multiple samples either at once or independently by controling the separate branch valves. The durable type 304 stainless steel can be used for…

  • Vacuum Manifolds

    Porvair

    Designed to be easily assembled and disassembled by robotic manipulators, thus enabling productive automation of SPE or DNA clean-up procedures.  Able to accommodate collection plates from 14mm-44mm in height and adapable for working with short, medium and long skirts and drip directors, the…

  • Microfil Filtration System

    MilliporeSigma

    This cost-effective Microfil® system uses presterilized, ready-to-use funnels and mem/panes on a patented filtration support. Convenient, easy to use system for well-accepted mem/pane filtration method conforms to international standards: CEN, Standard Methods, WHO Disposable,…

  • Vacuum Manifolds

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds. Stainless Steel Filter Holders Stainless steel holders differ in their funnel capacity (choice of 40 ml, 100 ml or 500 ml) and in their valve type (part numbers ending with CS feature sterile venting). They are…

  • Sterility Test Manifold

    Advantec MFS

    1-place or 6-place Support cup accepts a No.8 or 8b stopper Features a flushing manifold Applications requiring a closed system, as in sterility testing, use the sterility test manifold. It features a rear-mounted flushing or rinse manifold pipe which allows liquid to be brought…

  • Microtest Microplate Manifold

    DWK Life Sciences (Wheaton)

    The stainless steel manifolds (with PTFE stoppers) allow convenient distribution or aspiration in 24- and 96-well plates. They securely fit syringes of the Dosys™ line as well as the Acura 865. Fully autoclavable (121 °C / 250 °F)

  • Sterility Test Manifold and Holders

    MilliporeSigma

    3- and 6-place manifolds for sterility testing Stainless steel body, valves and filter supports

  • Vacuum Manifolds

    Sartorius

    Combisart: Modular stainless steel manifolds designed to accommodate all types of filter holders and funnels for microbiological analysis or particle count in quality assurance. The unique stainless steel three-way valve (tap) in each manifold is equipped with a Minisart syringe filter for sterile…

  • SYNTHWARE Vacuum Manifolds, PTFE Stopcocks

    Kemtech America

    General purpose manifold with 2mm or 4mm Teflon® stopcocks. Main tube is 22mm O.D. with serrated hose connection (10mm O.D.). Delivery ports have 10mm serrated hose connections. Distance between stopcocks is 75mm.

  • SYNTHWARE Vacuum Manifolds, High Vacuum Valves

    Kemtech America

    With a serrated hose connection (10mm O.D.) at left or right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.

  • SYNTHWARE Double Manifold, High Vacuum Valve

    Kemtech America

    This manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two 35/20 socket joints. Please order each component separately.

  • SYNTHWARE Manifold with #15 O-Ring Joints

    Kemtech America

    With 4mm double hollow high vacuum stopcocks. This four–port manifold is fitted with two 14/20 and 24/40 inner joints, and is 100mm center to center joints.#15 O-ring joint stopper (S480015) and #15 O-ring joint to serrated hose adapter have to be ordered separately. Viton® O-rings can be…

  • Visiprep™ SPE Vacuum Manifold, Standard, 24-Port Model

    MilliporeSigma

    SPE is a form of chromatography, and, as with other chromatographic techniques, control of flow rate is critical for maintaining reproducible extractions. Unlike other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube…

  • Microfil S Filtration Devices

    MilliporeSigma

    Microfil S devices are pre-assembled and individually packaged to provide a fast and dependable alternative to conventional multi-step methods. These pre-sterilized devices combine a funnel, protective lid, and filtration support so routine microbiological testing is fast and easy. No mem/pane…

  • SYNTHWARE Nitrogen/Argon Manifolds

    Kemtech America

    With 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used.

  • PVC Manifold

    Advantec MFS

    Lightweight Resistant to acids Standard cup accepts a No.8 or 8b stopper Lightweight and durable PVC material makes this vacuum manifold a great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The standard cup accepts a No.8 or 8b stopper to adapt to…

  • Microfil V Filtration Device

    MilliporeSigma

    With Microfil V filtration devices, there are no filter holders to assemble, no filter funnels to clean, and no filter support sterilization is needed after each filtration. Simply snap a Microfil V filtration device off the convenient carrying tray and you're ready to test. Place the…

  • Walters Manifold

    Ace Glass

    Hign vacuum manifold systems feature Easy Action PTFE stopcock valves providing for greaseless operation. Double-tube codes -50 & -54 feature Ace-Threds and 8mm OD tube-end ports. Double tube code -52 features hose barbed connections and 45 degree port placement. Walters manifold, code -40,…

  • Carb Octopus Air Sampling Manifold

    Ace Glass

    The vertically mounted Carb Octopus air sampling manifold design features an inner tube which allows condensation to drip to the collection bottle and away from the #7 Ace-Thred instrument ports. Available in standard 4 or 8 port configurations.

  • SYNTHWARE High Vacuum Manifolds, Solid Glass Stopcocks

    Kemtech America

    With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Distance between stopcocks is 75mm center to center.

  • Gas Manifold with Vacuum Chambers

    DWK Life Sciences (Kimble)

    An all-glass manifold for connecting inert gas and vacuum sources. Double vacuum gas manifold with vacuum chambers. Fabricated from 1/2" medium wall tubing Stopcocks are 4 mm bore glass with lower vacuum chamber and are spaced 85 mm apart Top right connection is for inert gas and…

  • SYNTHWARE Solvent Transfer Manifold

    Kemtech America

    Solvent Transfer Manifold Joints: 24/40 Valve Size: 0-4mm Overall Height: 140mm Overall Width: 380mm

  • Gas Manifold

    Ace Glass

    For portable gas analysis apparatus. Three or four straight 2 mm bore glass stopcocks and one three-way stopcock with back port, fabricated on capillary tubing. We can fabricate special gas manifolds of all kinds.

  • SYNTHWARE Vacuum Double Manifold with #15 O-Ring Joints

    Kemtech America

    Vacuum Double Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm

  • Drying Assembly, with Aluminum Holder

    Ace Glass

    Originally used for Lyophilizing and storing frozen slices of tissue for quantitative histochemistry (see O.H. Lowry, Journal of Histochem. & Cytochem., I, 420, 1953). More recently, used as a vacuum tube with aluminum holders by Nelson & Wakefield, Journal of Neuropathology & Exper. Neurology,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.