HPLC

HPLC Instrument Parts and Supplies, HPLC, Restek

Compare Tool

Select up to 3 products

All Products

Restek HPLC HPLC Instrument Parts and Supplies

1 - 32 of 193
Sort
View
Show
  • Opti-Cap GL-45 Bottle Tops

    Restek

    The most economical way to helium-sparge and deliver LC mobile phases. Opti-Cap tops fit all standard GL-45 bottles and have two 1/8" holes and one 1/16" hole for tubing. All three openings are designed for threaded PEEK plugs.

  • Eco-Cap Bottle Top, ETFE

    Restek

    Fits all standard GL-45 bottles; has two 1/8-inch holes and one 1/16-inch hole for tubing. Holes are not threaded.

  • EXP Hex-Head Fittings

    Restek

    Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid…

  • Capillary Stainless Steel Tubing Assemblies for Agilent HPLC Systems

    Restek

    Precut, micropolished tubing and preseated fittings for quick, easy maintenance of your Agilent HPLC systems Meet or exceed manufacturer's performance.

  • Universal 10-32 PEEK Column Connectors and Plugs

    Restek

    Universal PEEK connectors allow easy installation of all 1/16" tubing, including stainless steel, up to 5,000 psi.

  • Hub-Cap 4-Liter Bottle Tops

    Restek

    Hub-Cap bottle tops are a great way to neatly keep your mobile phase lines where they belong. Use them instead of plastic paraffin film, aluminum foil, or tape on your mobile phase reservoirs.

  • QuickSplit Post-Column Flow Splitters

    Restek

    Fluid resistor technology eliminates adjustments to capillary tubing for optimizing split ratio. Wide range of interchangeable resistors available. Fixed Flow Splitters for HPLC & LC-MS Split ratio not affected by changes in viscosity or pressure High operating pressure limit:…

  • Mobile Phase Sparge Filters

    Restek

    The sparge filter is an inexpensive way to prepare and maintain mobile phases free of dissolved gas. Filters are made from 316 stainless steel and PEEK, and they are compatible with most solvents. Connects to standard 1/8" OD (3.2 mm) PTFE tubing.

  • Roc LC Guard Column Holder

    Restek

    Protect your Roc LC columns with minimal effect on retention, peak shape, or efficiency Requires separate guard column cartridges (available from Restek)

  • LCLocker HPLC Organizer

    Restek

    Storage for ten HPLC columns (minimum 100 mm in length), compartments for accessories, and a book holder* Small footprint—easily fits next to HPLC instruments *Please note: Accessories and supplies in photograph are not included.

  • Clean-Cut Tubing Cutter

    Restek

    Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • HPLC 30-Column Storage Cabinet

    Restek

    Tired of stacks of HPLC columns on your lab benches? This easy-to-install cabinet saves space and protects columns; the hinged door is clear to allow quick identification of column labels or tags. Saves space and protects columns* Hinged door is clear for quick identification of column…

  • Trident LC Column Protection System

    Restek

    Redesigned to be more rugged and easier to use! Match your needs with three levels of protection: filter only, cartridge only, or filter and cartridge Durable metal tip with replaceable PEEK ferrule means easy installation onto column without tools Improved thread design and materials…

  • Inert PEEK Tubing

    Restek

    Replaces stainless steel, titanium, PTFE, or Tefzel tubing Less oxygen permeable and more temperature resistant (to 100 °C) than PTFE or Tefzel tubing Use with PEEK finger-tight or flangeless fittings Use tubing ≤ 0.007" to 7,000 psi; tubing ≥ 0.010" ID to 5,000 psi

  • Membrane Filters

    Restek

  • Low-Pressure Slip-On Inlet Filter for Mobile Phase Reservoir

    Restek

    A 316 stainless steel tip with a Tefzel collar seals to a corrosion-resistant 316 stainless steel filter element. The slip-on filter easily attaches to the pump inlet line, without the use of wrenches. The universal 1/8" OD tip accommodates standard PTFE tubing inner diameters. The cylindrical…

  • Secure-Fit Fittings (Two Connectors)

    Restek

    A good connection between HPLC components is necessary for trouble-free chromatography. Secure-Fit connectors from Restek and Selerity Technologies ensure a consistent, leak-free seal—and they eliminate excess dead volume! An internal spring mechanism holds the capillary tubing at the proper…

  • Well Plates

    Restek

    ?Polypropylene plates with round-bottom wells reduce liquid retention; conical bottom provides optimal recovery of reagents. Nunc shared wall technology allows increased well volume for optimum storage capacity and improved mixing. Round well shape is ideal for applications that require…

  • Survival Kit for HPLC, Stainless Steel

    Restek

    For start-up and maintenance in all HPLC systems. The stainless steel survival kit contains a wide range of tubing, fittings, and tools necessary to set up and maintain your HPLC system: a selection of lengths and IDs of 1/16-inch tubing, plus nuts, ferrules, a ValvTool wrench, and a…

  • High-Pressure Frit-Type In-Line Filter

    Restek

    Restek’s high-pressure in-line filter is a stand-alone version of the Trident column protection system, specifically designed for ease of use, low dead-volume, and flexibility. The filter has a replaceable, PEEK encapsulated 316 stainless steel frit with a surface area of 12 mm 2 . The…

  • UltraShield UHPLC PreColumn Filter

    Restek

    Cost-effective protection for UHPLC systems Reliable way to extend column lifetime Universal fit—connects easily to any brand column Leak-tight to 15,000 psi (1,034 bar) 0.5 µm or 0.2 µm titanium frit in a stainless steel body with PEEK ferrule

  • Survival Kit for HPLC, PEEK

    Restek

    For start-up and maintenance in all HPLC systems. The PEEK Survival Kit is an invaluable parts kit that contains tubing, fittings, and tools essential for setting up and maintaining your HPLC system: PEEK tubing, connectors, and elbows, PTFE tubing, a tubing cutter and extra blades, a ValvTool…

  • Last Drop Filter

    Restek

    The flat filter element sits parallel to the bottom of the mobile phase reservoir, allowing the filter to draw 98% of the mobile phase without drawing air into the system. Conventional cylindrical mobile phase filters begin to draw air into the system when approximately 10% of the solvent remains…

  • Waste Overflow Indicator for LC Systems

    Restek

    The Restek waste overflow indicator will help keep your mobile phase waste where it belongs—in the waste container! Compact, battery-operated unit fits securely on solvent bottles and accommodates two waste streams. An audible alarm is given as the solvent waste container approaches capacity,…

  • EXP Hand-Tight Fittings

    Restek

    Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid…

  • Universal Sealing Mats

    Restek

    Protect contents and prevent carryover with pre-slit cap mats Chemically resistant, silicone mats are excellent for compound storage to -80°C Pre-slit mats pierceable by autosampler needle, pipette tip, or probe Universal mat for sealing 0.45, 1.3, and 2.0 mL plates

  • Syringe for Shimadzu HPLC Systems

    Restek

  • 1/4" HPLC Frits

    Restek

    We manufacture our frits from fine, chromatographic-grade 316 stainless steel, and we offer sizes to fit most column and pore sizes. To choose the correct frit, check its pore size compatibility with the particle size of the packing in the column. If the packing has a smaller particle size than the…

  • Gold Disk Seal for Agilent HPLC Systems

    Restek

    Please note: Not compatible for use with Outlet Cap and Gold Seal Assembly Tool (cat.# 24989).

  • ASI Check Valves for Waters Alliance Model 2690 & 2695

    Restek

    ASI subjects each valve to a rigorous series of tests, including self-priming capability, which means you typically won’t need a syringe or draw-off valves to prime your pump. A high-pressure test ensures that the valve will not leak, even at pressures up to 12,000 psi (82,737 kPa). A…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.