HPLC

HPLC Instrument Parts and Supplies, HPLC

Compare Tool

Select up to 3 products

All Products

HPLC HPLC Instrument Parts and Supplies

1 - 32 of 305
Sort
View
Show
  • Opti-Cap GL-45 Bottle Tops

    Restek

    The most economical way to helium-sparge and deliver LC mobile phases. Opti-Cap tops fit all standard GL-45 bottles and have two 1/8" holes and one 1/16" hole for tubing. All three openings are designed for threaded PEEK plugs.

  • Eco-Cap Bottle Top, ETFE

    Restek

    Fits all standard GL-45 bottles; has two 1/8-inch holes and one 1/16-inch hole for tubing. Holes are not threaded.

  • 1/16" Stainless Steel Ferrule

    Restek

  • Solvent Filters for G1311/12/54A Pumps

    Agilent Technologies

    Unfiltered solvents or solvents contaminated with microbial growth can clog solvent inlet filters, reducing the lifetime of the filter and impacting pump performance. Remember to clean or replace the solvent inlet filters at least once every 3 months.

  • Clean-Cut Tubing Cutter

    Restek

    Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • Upchurch PEEK Fingertight Fitting nut and ferrule 10-32

    MilliporeSigma

    Material: PEEK nut and ferrule Packaging: pkg of 10 ea I.D.:  0.0625 in. (1.5875 mm) Fitting:  nut and ferrule 10-32 General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy…

  • Solvent Inlet Filters

    Thermo Scientific

    For HPLC Systems Stainless steel 10µm inlet filters for longer lifetime No tools required for replacement Bottom-of-the-Bottle solvent filters: Efficient draw 100% PTFE polymer, including 2µm filter Built-in helium sparge port and frit

  • Bluestem Glass Solvent Filter

    Restek

    Prevent the particulates and microbial growth in your LC solvents from entering your instrument with the new Restek Bluestem glass solvent filter. Restek Bluestem glass solvent filter provides clean mobile phase to extend the life of columns and pump seals 15 µm borosilicate glass…

  • LC Fittings and Unions

    Agilent Technologies

    Different columns have different fitting requirements. (Zorbax columns use standard Swagelok fittings) Agilent 1100 modules use standard Swagelok fittings Rheodyne injection valves require Rheodyne fittings How do you choose the correct fittings? To ensure leak-free connections, and to prevent…

  • Capillary Stainless Steel Tubing Assemblies for Agilent HPLC Systems

    Restek

    Precut, micropolished tubing and preseated fittings for quick, easy maintenance of your Agilent HPLC systems Meet or exceed manufacturer's performance.

  • LC Stainless Steel Capillary Tubing

    Restek

    Whether you need to replace system tubing as part of your troubleshooting or want to reduce the dwell volume of your system as you move to narrower columns, Restek has the quality tubing in the lengths and IDs you need. Each ID is color coded, so it is easy to identify and replace correctly. Tubing…

  • Waste Overflow Indicator for LC Systems

    Restek

    The Restek waste overflow indicator will help keep your mobile phase waste where it belongs—in the waste container! Compact, battery-operated unit fits securely on solvent bottles and accommodates two waste streams. An audible alarm is given as the solvent waste container approaches capacity,…

  • Solvent Inlet Filter for Agilent HPLC Systems

    Restek

  • Low-Pressure Slip-On Inlet Filter for Mobile Phase Reservoir

    Restek

    A 316 stainless steel tip with a Tefzel collar seals to a corrosion-resistant 316 stainless steel filter element. The slip-on filter easily attaches to the pump inlet line, without the use of wrenches. The universal 1/8" OD tip accommodates standard PTFE tubing inner diameters. The cylindrical…

  • Hub-Cap Filter Kit

    Restek

    Kit includes: bottle adaptor, bottle adaptor nut, filter inlet cap, grid support, vacuum hose barb, tube compression fitting, 47 mm grid, 47 mm 0.22 µm filter membrane, 47 mm 0.45 µm filter membrane, 1/4" OD x 1/8" ID ultra chemical resistant, FEP-lined Tygon tubing (3'),…

  • 1/4" HPLC Frits

    Restek

    We manufacture our frits from fine, chromatographic-grade 316 stainless steel, and we offer sizes to fit most column and pore sizes. To choose the correct frit, check its pore size compatibility with the particle size of the packing in the column. If the packing has a smaller particle size than the…

  • Inert PEEK Tubing

    Restek

    Replaces stainless steel, titanium, PTFE, or Tefzel tubing Less oxygen permeable and more temperature resistant (to 100 °C) than PTFE or Tefzel tubing Use with PEEK finger-tight or flangeless fittings Use tubing ≤ 0.007" to 7,000 psi; tubing ≥ 0.010" ID to 5,000 psi

  • Hub-Cap 4-Liter Bottle Tops

    Restek

    Hub-Cap bottle tops are a great way to neatly keep your mobile phase lines where they belong. Use them instead of plastic paraffin film, aluminum foil, or tape on your mobile phase reservoirs.

  • Diode Array Detector (DAD)/Multiple Wavelength Detector (MWD)

    Agilent Technologies

    Agilent's certified lamps are manufactured under ISO 9001 certified environment and are fully traceable through out every step of the production process. Each lamp is then tested to ensure it meets Agilent's specifications for performance. Test equipment is regularly calibrated using…

  • High Pressure Stainless Steel Nuts and Ferrules

    Thermo Scientific

    Accommodate a wide range of configurations Designed for 10-32 port configurations Burr and contaminant free

  • PEEKsil Capillary Tubing

    Thermo Scientific

  • EXP Hand-Tight Fittings

    Restek

    Hand-tight fitting style achieves effortless HPLC seals—no tools needed for a 8,700+ psi seal Both hand-tight and hex-head styles wrench-tighten for reliable UHPLC use up to 20,000+ psi! Patented ferrule can be installed repeatedly without compromising high-pressure seal Hybrid…

  • PTFE Tubing

    Restek

    Ideal for mobile phase inlet lines Chemically inert Use to 500 psi (3,447 kPa) and 80°C

  • Tubing Clip

    Restek

    Securely holds 1/16" or 1/8" tubing in beaker, flask, or bottle up to 4 mm thick.

  • Injection Valve Maintenance

    Agilent Technologies

    Rotor seal replacement is the most common injection valve maintenance procedure.

  • Secure-Fit Fittings (Two Connectors)

    Restek

    A good connection between HPLC components is necessary for trouble-free chromatography. Secure-Fit connectors from Restek and Selerity Technologies ensure a consistent, leak-free seal—and they eliminate excess dead volume! An internal spring mechanism holds the capillary tubing at the proper…

  • Seals And Pistons

    Agilent Technologies

    Pump seals should be replaced when there are leaks on the bottom of the pump head, when retention times are inconsistent, or when the pressure ripple is unstable. Each time the seals are replaced, the pistons (plungers) should be examined for scratches. Scratched pistons will cause small…

  • High-Pressure Cup-Type In-Line Filter

    Restek

    This high-pressure cup-type filter can be used in fluid streams operating to 15,000 psi (103,421 kPa). The cup-shaped filter elements have a large (2.5 cm 2 ) surface area to give long operating lifetime. Mounted in screw-type adapters, they are easily removed for cleaning. Normally, backflushing…

  • Upchurch PEEK Fingertight Fitting, fitting 10-32 (one-piece)

    MilliporeSigma

    General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit.…

  • Lamps for Agilent HPLC Systems

    Restek

  • Outlet Cap & Gold Seal Assembly for Agilent HPLC Systems

    Restek

    Please note: Not compatible for use with Outlet Cap and Gold Seal Assembly Tool (cat.# 24989).

  • Universal 10-32 PEEK Column Connectors and Plugs

    Restek

    Universal PEEK connectors allow easy installation of all 1/16" tubing, including stainless steel, up to 5,000 psi.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.