HPLC

Compare Tool

Select up to 3 products

1 - 32 of 311
Sort
View
Show
  • Opti-Cap GL-45 Bottle Tops

    Restek

    The most economical way to helium-sparge and deliver LC mobile phases. Opti-Cap tops fit all standard GL-45 bottles and have two 1/8" holes and one 1/16" hole for tubing. All three openings are designed for threaded PEEK plugs.

  • LC Stainless Steel Capillary Tubing

    Restek

    Whether you need to replace system tubing as part of your troubleshooting or want to reduce the dwell volume of your system as you move to narrower columns, Restek has the quality tubing in the lengths and IDs you need. Each ID is color coded, so it is easy to identify and replace correctly. Tubing…

  • Eco-Cap Bottle Top, ETFE

    Restek

    Fits all standard GL-45 bottles; has two 1/8-inch holes and one 1/16-inch hole for tubing. Holes are not threaded.

  • Solvent Filters for G1311/12/54A Pumps

    Agilent Technologies

    Unfiltered solvents or solvents contaminated with microbial growth can clog solvent inlet filters, reducing the lifetime of the filter and impacting pump performance. Remember to clean or replace the solvent inlet filters at least once every 3 months.

  • Solvent Inlet Filters

    Thermo Scientific

    For HPLC Systems Stainless steel 10µm inlet filters for longer lifetime No tools required for replacement Bottom-of-the-Bottle solvent filters: Efficient draw 100% PTFE polymer, including 2µm filter Built-in helium sparge port and frit

  • LC Fittings and Unions

    Agilent Technologies

    Different columns have different fitting requirements. (Zorbax columns use standard Swagelok fittings) Agilent 1100 modules use standard Swagelok fittings Rheodyne injection valves require Rheodyne fittings How do you choose the correct fittings? To ensure leak-free connections, and to prevent…

  • Hub-Cap 4-Liter Bottle Tops

    Restek

    Hub-Cap bottle tops are a great way to neatly keep your mobile phase lines where they belong. Use them instead of plastic paraffin film, aluminum foil, or tape on your mobile phase reservoirs.

  • Deuterium Lamps

    Varsal

    2000+ hour long life Consistent intensity over time High signal stability

  • Purge Valve

    Agilent Technologies

    Common to all 1100/1200 pump modules, the purge valve has a gold seal held in place with a plastic cup The most frequently replaced item in the 1100/1200 Series pumps is the purge valve PTFE frit, which can clog with seal material or solvent particulates When replacing the frit,…

  • Clean-Cut Tubing Cutter

    Restek

    Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • Stainless Steel Sample Loops

    Agilent Technologies

    Sample loops for Rheodyne 7725 Series and 7125 Series valves are not interchangeable due to the change in port angle Actual volumes can differ due to tolerance of metal tubing bore Accuracy of large metal loops is ±5%, intermediate loops ±10%, small loops ±30%

  • Hub-Cap Filter Kit

    Restek

    Kit includes: bottle adaptor, bottle adaptor nut, filter inlet cap, grid support, vacuum hose barb, tube compression fitting, 47 mm grid, 47 mm 0.22 µm filter membrane, 47 mm 0.45 µm filter membrane, 1/4" OD x 1/8" ID ultra chemical resistant, FEP-lined Tygon tubing (3'),…

  • Mobile Phase Sparge Filters

    Restek

    The sparge filter is an inexpensive way to prepare and maintain mobile phases free of dissolved gas. Filters are made from 316 stainless steel and PEEK, and they are compatible with most solvents. Connects to standard 1/8" OD (3.2 mm) PTFE tubing.

  • PEEKsil Capillary Tubing

    Thermo Scientific

  • 1/4" HPLC Frits

    Restek

    We manufacture our frits from fine, chromatographic-grade 316 stainless steel, and we offer sizes to fit most column and pore sizes. To choose the correct frit, check its pore size compatibility with the particle size of the packing in the column. If the packing has a smaller particle size than the…

  • Survival Kit for HPLC, PEEK

    Restek

    For start-up and maintenance in all HPLC systems. The PEEK Survival Kit is an invaluable parts kit that contains tubing, fittings, and tools essential for setting up and maintaining your HPLC system: PEEK tubing, connectors, and elbows, PTFE tubing, a tubing cutter and extra blades, a ValvTool…

  • Suction Filter for Shimadzu HPLC Systems

    Restek

  • Capillary Stainless Steel Tubing Assemblies for Agilent HPLC Systems

    Restek

    Precut, micropolished tubing and preseated fittings for quick, easy maintenance of your Agilent HPLC systems Meet or exceed manufacturer's performance.

  • High-Pressure Cup-Type In-Line Filter

    Restek

    This high-pressure cup-type filter can be used in fluid streams operating to 15,000 psi (103,421 kPa). The cup-shaped filter elements have a large (2.5 cm 2 ) surface area to give long operating lifetime. Mounted in screw-type adapters, they are easily removed for cleaning. Normally, backflushing…

  • Mininert® Valve, screw thread for use with 20/400 mm thread

    MilliporeSigma

    Application Mininert valves are leak-tight closures for vials and other containers. They are available in both crimp and screw thread versions. Only PTFE and glass are in contact with the contents of the container. They are the ideal closure for the following applications: calibration…

  • TopLoader BalanceBank Storage Unit

    Restek

    Provides easy access to wipers, weigh papers, boats, and spatulas* Creates a neat, highly functional weighing area and workstation *Please note: Accessories and supplies in photograph are not included.

  • HPLC PEEK Performance Kit

    Restek

    This HPLC PEEK Performance Kit is a useful complement to your HPLC system. Includes: Hub-Cap Adapter w/ Cap (1) Tubing Clips (3) Clean Cut Tubing Cutter (1) PEEK Finger Tight Fittings (5) PEEK Column Plugs (5) PEEK 90° Tubing Elbows (2) PEEK 180° Tubing Elbows…

  • Upchurch PEEK Fingertight Fitting nut and ferrule 10-32

    MilliporeSigma

    Material: PEEK nut and ferrule Packaging: pkg of 10 ea I.D.:  0.0625 in. (1.5875 mm) Fitting:  nut and ferrule 10-32 General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy…

  • PEEK Union Connector

    Restek

    Quickly and reliably connect two pieces of 1/16" tubing. 0.3 mm union bore. End fittings included.

  • Waste Overflow Indicator for LC Systems

    Restek

    The Restek waste overflow indicator will help keep your mobile phase waste where it belongs—in the waste container! Compact, battery-operated unit fits securely on solvent bottles and accommodates two waste streams. An audible alarm is given as the solvent waste container approaches capacity,…

  • Bluestem Glass Solvent Filter

    Restek

    Prevent the particulates and microbial growth in your LC solvents from entering your instrument with the new Restek Bluestem glass solvent filter. Restek Bluestem glass solvent filter provides clean mobile phase to extend the life of columns and pump seals 15 µm borosilicate glass…

  • Detector Lamps for Merck-Hitachi Instruments

    Thermo Scientific

    Low cost long-lasting deuterium lamps to fit most spectrophotometers and detectors. Thermo Brand Deuterium Lamps offer Best-in-Class spectral stability as well as superior lamp lifetime to insure that you get full value from each and every lamp. These lamps are engineered to be sure you get the…

  • Universal 10-32 PEEK Column Connectors and Plugs

    Restek

    Universal PEEK connectors allow easy installation of all 1/16" tubing, including stainless steel, up to 5,000 psi.

  • Outlet Cap & Gold Seal Assembly for Agilent HPLC Systems

    Restek

    Please note: Not compatible for use with Outlet Cap and Gold Seal Assembly Tool (cat.# 24989).

  • LC Maintenance Kits

    Restek

    Simplify routine maintenance with these handy kits for LC. Significant savings over instrument manufacturer prices High quality components in every kit Wide selection of PM Kits for your HPLC systems

  • Universal Sealing Mats

    Restek

    Protect contents and prevent carryover with pre-slit cap mats Chemically resistant, silicone mats are excellent for compound storage to -80°C Pre-slit mats pierceable by autosampler needle, pipette tip, or probe Universal mat for sealing 0.45, 1.3, and 2.0 mL plates

  • PTFE Tubing

    Restek

    Ideal for mobile phase inlet lines Chemically inert Use to 500 psi (3,447 kPa) and 80°C

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.