Hoods

Chemical Fume Hoods, Hoods, Labconco

Compare Tool

Select up to 3 products

All Products

Labconco Hoods Chemical Fume Hoods

1 - 32 of 68
Sort
View
Show
  • Purifier® Logic®+ A2 Biosafety Cabinets

    Labconco

    The NEW Purifier Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in…

  • Protector® Premier® Laboratory Hoods

    Labconco

    Protector® Premier® Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance…

  • Protector Storage Cabinets and Shelf Kits

    Labconco

    Protector standard storage cabinet features 18 gauge steel exterior sidewalls that are epoxy-coated for chemical resistance. Cabinets feature two non-locking manual doors. Four individual leveling feet allow users to make adjustments to level the cabinet based on the condition of their floors.…

  • Fiberglass 30 Laboratory Hoods

    Labconco

    Compact, benchtop Fiberglass 30 Laboratory Hoods are designed for research, educational and clinical applications requiring small working space and efficient fume removal. The fiberglass liner is corrosion-resistant, durable, fire-resistant and light reflective. The smooth one-piece molded…

  • Protector® Airo™ Filtered Fume Hoods

    Labconco

    If you have robust chemical applications requiring a fume hood but have low ceiling height and no means to duct to the outside, consider the Protector® Airo™ Filtered Fume Hood. Labconco has combined its patented* fully-featured, containment- enhancing Protector® Hood design with…

  • Protector PVC Acid Digestion Laboratory Hoods

    Labconco

    Protector PVC Acid Digestion Laboratory Hood. 37.7" deep. Features heat-welded unplasticized PVC liner, built-in washdown system, integral work surface, drainage trough and 3-16" thick tempered safety glass vertical-rising sash with frame of powder-coated aluminum and PVC (glass is suitable for…

  • Protector XL Floor-Mounted Fume Hoods

    Labconco

    Protector XL Floor-Mounted (Walk-In) Laboratory Hoods have panel liners that may be constructed of a variety of corrosion-resistant materials and supplied in three depths to meet individual installation and application requirements. They are suitable for general chemistry applications and…

  • Protector XStream Laboratory Hood

    Labconco

    The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than…

  • Purifier Cell Logic+ Class II A2 Biosafety Cabinets

    Labconco

    The Purifier Cell Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest,…

  • Neutrodine Molecular Filters

    Labconco

    Neutrodine molecular carbon filter unit for multi-purpose use of acids/bases/solvents, separated or combined.

  • 6' Protector Echo Filtered Fume Hoods

    Labconco

    Protector Echo Filtered Fume Hoods with Neutrodine filtration are appropriate for procedures that require personnel protection in a lab that cannot accomodate duct work nor make-up air. Labconco has combined its patented fully-featured, containment-enhancing Protector® Hood design…

  • Purifier® 4' Axiom™ Class II, Type C1 BioSafety Cabinets with 10" Sash

    Labconco

    The Purifier Axiom Class II, Type C1* is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • 8' Protector Echo Filtered Fume Hoods

    Labconco

    Protector Echo Filtered Fume Hoods with Neutrodine filtration are appropriate for procedures that require personnel protection in a lab that cannot accomodate duct work nor make-up air. Labconco has combined its patented fully-featured, containment-enhancing Protector® Hood design…

  • Intelli-Sense™ Multi-Speed Coated Steel Blowers

    Labconco

    Recommended for low to moderately corrosive applications Intelli-Sense Multi-Speed Blowers are weatherized, direct drive, non-explosion-proof blowers controlled by a two or three position switch. Each blower has a reliable electronically commutated motor (ECM), which consumes one third less…

  • Protector XL Benchtop Laboratory Hoods

    Labconco

    The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

  • SpillStopper™ Work Surfaces, 3' Wide

    Labconco

    SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins. They are dished and contoured to conform to the interior liner of Protector Laboratory Hoods. The front edge has a large radius to aerodynamically direct airflow into the fume hood. Pre-drilled…

  • Purifier Logic+ Class II B2 Biosafety Cabinets

    Labconco

    The Purifier Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest, fully…

  • Biosafety Cabinet & Clean Bench Accessories

    Labconco

    Labconco offers a variety of accessories to customize your Biosafety Cabinet, Procedure Station, Clean Bench or Filtered PCR Enclosure. Thomas No. 1197K28 Ultraviolet Lamp Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety…

  • Fume Adsorbers

    Labconco

    Traps solvent vapors Fume Adsorber is designed for histology cover slipping and staining areas and uses activated carbon media to adsorb annoying odors and noxious vapors such as xylene and toluene. Solvent vapors are trapped in the capillary-like channels of the carbon filter while clean air is…

  • SpillStopper Work Surfaces, for Protector Premier Hoods

    Labconco

    SpillStopper Work Surfaces are compatible with Protector (Premier or XStream) Laboratory Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory…

  • SpillStopper™ Work Surfaces, 6' Wide

    Labconco

    SpillStopper Work Surfaces are molded from a special formulation of corrosion-resistant epoxy resins. They are dished and contoured to conform to the interior liner of Protector Laboratory Hoods. The front edge has a large radius to aerodynamically direct airflow into the fume hood. Pre-drilled…

  • 6' Protector Pass-Through Laboratory Hoods

    Labconco

    Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

  • Protector Work Stations

    Labconco

    Face velocities from 60 to 100 fpm Built-in dynamically-balanced motorized impeller Speed controlled to achieve desired inflow velocity Protector Work Stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a…

  • 4' Protector Echo Filtered Fume Hoods

    Labconco

    Protector Echo Filtered Fume Hoods with Neutrodine filtration are appropriate for procedures that require personnel protection in a lab that cannot accomodate duct work nor make-up air. Labconco has combined its patented fully-featured, containment-enhancing Protector® Hood design…

  • SpillStopper Work Surfaces, for Protector XStream Hood

    Labconco

    SpillStopper Work Surfaces are compatible with Protector (Premier or XStream) Laboratory Hoods with Eco-Foil(TM) Air Foil. Molded from a special formulation of corrosion-resistant epoxy resins, these work surfaces are dished and contoured to conform to the interior liner of Protector Laboratory…

  • Protector Fume Hood Accessories

    Labconco

    Screen mounts behind the baffles for trapping tissue wipers & other papers. Each kit includes mounting hardware, powder-coated stainless steel screen & instructions. Contact Labconco for screens for hoods wider than 8'.

  • Stainless Steel Work Surfaces

    Labconco

    Type 304 stainless steel work surfaces have a 1" deep front spill trough and fit dimensions of Xpert Systems and Stations.

  • Purifier® 6' Axiom™ Class II, Type C1 BioSafety Cabinets with 8" Sash

    Labconco

    The Purifier Axiom Class II, Type C1* is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • Protector Filtermate

    Labconco

    Require no outside ducting Non-sparking motor/blower Foot operated on/off switch Durable construction Hard rubber casters Adjustable blower speed An accessory to the Protector® VS™ Ventilation Station, the Filtermate filters the contaminated air generated and returns purified air to the…

  • Purifier® 4' Axiom™ Class II, Type C1 BioSafety Cabinets with 8" Sash

    Labconco

    The Purifier Axiom Class II, Type C1* is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

  • Purifier Cell Logic+ Class II B2 Biosafety Cabinets

    Labconco

    The Purifier Cell Logic+ Class II B2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with built in armrest,…

  • HEPA Exhaust Filter For Cabinet 6' Purifier Logic II Cabinets And 6' Puricare

    Labconco

    Carbon-based and HEPA filters used in a variety of Labconco enclosures require periodic replacement. Applicable products include: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic Biosafety Cabinets and Purifier Logic Biosafety Cabinets with an enclosure nominal width of 6 feet.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.