Kemtech America

Flasks, Kemtech America

Compare Tool

Select up to 3 products

1 - 32 of 50
Sort
View
Show
  • SYNTHWARE Round Bottom Vertical Three Neck Flasks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • SYNTHWARE Microscale 3-Neck Round Bottom Flasks

    Kemtech America

    Round Bottom Flask, Micro Scale, Synthware, Capacity: 25, or 50mL available, Joints: 14/10 threaded.

  • SYNTHWARE Round Bottom Reaction Flasks with High Vacuum Valve

    Kemtech America

    SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the flask while an inert gas purge is passed through the sidearm.

  • SYNTHWARE Round Bottom Flasks

    Kemtech America

    SYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.

  • SYNTHWARE Round Bottom Angled Three Neck Flasks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • SYNTHWARE Transfer/Storage Flasks

    Kemtech America

    SYNTHWARE transfer/storage flask for long term storage of deoxygenated solvent. Recovery of solvent is done thru the valve body using a cannula or syringe.

  • SYNTHWARE Schlenk Storage Tubes with High Vacuum Valves

    Kemtech America

    SYNTHWARE Schlenk storage tube with a high vacuum valve. The valve has a PTFE O-ring at the tip and a PTFE wiper to protect the O-rings on the shaft. Valve is used to control liquid or gas flow into the vessel.

  • SYNTHWARE Erlenmeyer Flasks

    Kemtech America

    SYNTHWARE Erlenmeyer flask with standard taper outer joint. All sizes are hand blown from tubing to ensure heavy and uniform wall.

  • SYNTHWARE Peptide Synthesis Vessel, Solid Phase, with Lower Joint & T-Bore PTFE…

    Kemtech America

    Peptide Synthesis Vessel, Solid Phase, Synthware, Capacity: 25-500mL Available, Disc Porosity: Medium or Coarse available, Frit OD: 25-80mm available, Thread Size: 25 and 32 available, Joint Size: 24/40 Inner with drip tip, Hose Connection: 8mm, Supplied with PTFE-lined screw cap and T-bore PTFE…

  • SYNTHWARE Tall Form Dewar Flasks

    Kemtech America

    Dewar Flask, Tall Form, Metal Housing Capacity: 350, 665, 1000, 1900, 3500, and 4300mL available Interior Depth: 125, 195,190, 302 and 305mm available Interior Diameter: 70mm Flask has weighted base for stability and a full length aluminum housing which extends to the top rim. *Due…

  • SYNTHWARE Filter Flasks

    Kemtech America

    SYNTHWARE filter flask with standard taper outer joint and 10mm O.D. hose connection. All sizes are blown from tubing to ensure heavy and uniform wall.

  • SYNTHWARE Flat Bottom Flasks

    Kemtech America

    SYNTHWARE flat bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.

  • SYNTHWARE Round Bottom Flasks with Spherical Socket Joints

    Kemtech America

    SYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.

  • SYNTHWARE Round Bottom Three Neck Flasks with Bottom Outlets

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with a bottom outlet. Both the center neck and the vertical side necks are standard taper outer joints. The lower outlet is a 4mm straight bore PTFE stopcock. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • SYNTHWARE Low Form Hemispherical Dewar Flasks

    Kemtech America

    Dewar Flask, Low Form, Hemispherical Multiple sizes available, with aluminum base to allow transfer of magnetic field. *Due to extra high vacuum, the Dewar flasks still have a rare possibility to explode, so working behind a safety shield in hood and always wearing goggles are strongly recommended.

  • SYNTHWARE Round Bottom Pressure Vessels

    Kemtech America

    Pressure Vessel, Round Bottom, Synthware, Capacity: 75, 15, or 350mL available, OD: 46-80mm available, Length: 129-162mm available, GL Thread: 15 or 25 available.

  • SYNTHWARE Storage Tubes with Outer Joints

    Kemtech America

    SYNTHWARE storage tube with standard taper outer joint and high vacuum valve. Valve has a PTFE o-ring at the tip. Valve is used to control liquid or gas flow into the vessel.

  • SYNTHWARE Round Bottom Reaction Flasks with Glass Stopcock

    Kemtech America

    SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

  • SYNTHWARE Modified Schlenk Flasks with Teflon® Stopcocks

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 2mm bore PTFE stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.

  • Synthware Heavy Wall Volumetric Flasks

    Kemtech America

    Heavy Wall Available from 5mL-1000mL Individually Certified Class A Glass Stopper included

  • SYNTHWARE Round Bottom Two Neck Flasks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • SYNTHWARE Round Bottom Flasks with Joint Hooks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, single neck flask with a standard taper outer joint. All sizes are hand blown from tubing to ensure uniform wall thickness. Flask has two hooks 180° apart for use with stainless steel joint springs.

  • SYNTHWARE Modified Schlenk Flasks with High Vacuum Valves

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 0-4 mm high vacuum valve in the side arm. The valve has a PTFE o-ring at the tip. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate…

  • SYNTHWARE Heavy Wall Cylindrical Pressure Vessels

    Kemtech America

    Pressure Vessel, Heavy Wall, Cylindrical, Synthware, Capacity: 15-120mL available, GL Thread Size: 15, Vessel has an internal thread for use with PTFE bushing, O-ring is positioned above the thread for inproved sealing.

  • SYNTHWARE Reaction Tubes with High Vacuum Valve

    Kemtech America

    SYNTHWARE cylindrical reaction tube with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the tube while an inert gas purge is passed through the sidearm.

  • SYNTHWARE Modified Schlenk Flasks with Glass Stopcocks

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and 2mm bore glass stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.

  • SYNTHWARE Storage Flasks with High Vacuum Valve

    Kemtech America

    SYNTHWARE storage flask with high vacuum valve and side arm. Valve has a PTFE o-ring at the tip and PTFE wiper to protect the Viton o-ring on the shaft.

  • SYNTHWARE Round Bottom Two Neck Reaction Flasks with Glass Stopcock

    Kemtech America

    SYNTHWARE round bottom two neck reaction flask with standard taper outer joints and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

  • SYNTHWARE Round Bottom Angled Four Neck Flasks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • SYNTHWARE Reaction Tubes with Glass Stopcock

    Kemtech America

    SYNTHWARE cylindrical reaction tube with standard taper outer joint and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

  • SYNTHWARE Storage Flasks with Outer Joints

    Kemtech America

    SYNTHWARE storage flask with standard taper outer joint and high vacuum valve. Valve has a PTFE o-ring at the tip. Valve is used to control liquid or gas flow into the flask.

  • SYNTHWARE Reaction Vessel, Photochemical

    Kemtech America

    Reaction Vessel, Photochemical, Synthware, Joint: 14/20 + 24/40, #50 Internal Top Thread, #7 Arm Side Thread, 500mL Capacity.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.