Flasks

Compare Tool

Select up to 3 products

1 - 17 of 17
Sort
View
Show
  • Stainless Steel Quick Release Clamps

    Wilmad LabGlass

    Made entirely from stainless steel, these clamps firmly hold reaction vessels with Duran® flanges, and lids together. Quick release mechanism has a screw adjustment for tension control of flange.

  • Jacketed Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    These jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…

  • Cylindrical Jacketed Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These cylindrical borosilicate glass reaction vessels are jacketed with 1/2" hose connections. They have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. NOTE: Use LG-7316 clamps.

  • 4 Neck Reaction Vessel Covers

    Wilmad LabGlass

    Featuring a center neck and three side necks with full length outer Standard Taper joints that are 120° apart, these borosilicate glass reaction vessel lids have a conical flange. Bottom flange ID is 4" and ground for a leak-proof fit with a reaction flask. For use with reaction vessels…

  • Jacketed Indented Cylindrical Reaction Vessel with Flat Flange

    Wilmad LabGlass

    These jacketed, cylindrical borosilicate glass reaction vessels have four indentations for improved stirring. They are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. Jacket has 1/2" hose…

  • Conical Flange Vessel Clamp

    Wilmad LabGlass

    This clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels…

  • 4 Neck Molded Reaction Vessel Covers

    Wilmad LabGlass

    These borosilicate glass 4-neck reaction vessel lids/covers have a contact surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with…

  • Cylindrical Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.

  • Stainless Steel McCarter Reaction Clamps

    Wilmad LabGlass

    Used to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…

  • Cylindrical Reaction Kettles

    Wilmad LabGlass

    Cylindrically shaped, the upper end of these borosilicate glass reaction kettles are tooled to obtain a thickened portion and flat top.The finely ground tops create a leak-proof fit with covers LG-8030 to LG-8050, ML-1285 and ML-1286.

  • 3 Neck Reaction Vessel/Kettle Cover

    Wilmad LabGlass

    Featuring a center neck and two side necks with full length outer Standard Taper joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or…

  • Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    These borosilicate glass cylindrical reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing…

  • 3 Neck Flat Flange Reaction Vessel Cover

    Wilmad LabGlass

    Featuring a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has a flat flange. For use with large capacity cylindrical reaction vessels, 2000mL, 3000mL and 4000mL (LG-8082, LG-8084, LG-8085, and LG-8089). Flange…

  • 4 Neck O-Ring Flange Reaction Vessel Covers for Size 359 O-Rings

    Wilmad LabGlass

    Featuring a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels…

  • 3 Neck O-Ring Flange Reaction Vessel Cover for Size 359 O-Rings

    Wilmad LabGlass

    Featuring a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has an 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels…

  • Cylindrical Reaction Vessel, Indented, Jacketed, O-Ring Flange

    Wilmad LabGlass

    Our reaction vessel with indentations jacketed with 1/2" hose connectors.

  • 4 Neck Flat Flange Reaction Vessel Cover

    Wilmad LabGlass

    Featuring a center neck and three side necks with full length outer Standard Taper joints, this borosilicate glass 4-neck reaction vessel lid/cover has a flat flange. Use LG-7316 clamps. NOTE: LG-8087 is designed to be used with LG-8080, LG-8084, LG-8085, and LG-8089 cylindrical reaction vessels.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.