Specialty Flasks
Specialty flasks are the backbone of many experimental setups, offering the durability and precision needed for demanding experiments.
Explore our diverse collection, including round bottom flasks, single neck flasks, bioreactor flasks, Ace Glass freeze-drying flasks, and 4 neck flat flange reaction vessel covers. All flasks are carefully designed to withstand the requirements of multiple research and analysis procedures.
In this category, you'll discover renowned brands such as Chemglass, Ace Glass, and Kemtech America, all known for their commitment to quality and innovation in lab glassware.
Whether you're searching for a Schlenk flask, a three-neck round bottom flask, a biomass flask, or a 3-neck flask for your lab, we offer a selection of flask options suitable for a range of experiements. Trust our specialty flasks to provide the precision and durability your research demands.
-
KIMAX Sugar Flasks
DWK Life Sciences (Kimble)Kohlrausch, Class A Borosilicate glass Calibrated to contain 20°C Mouth enlarged for easier introduction of sample Meet NBS requirements
-
Biomass Flasks
GSC International, Inc.These biomass flasks are made from quality borosilicate glass. They all have a 24/40 ground glass bottom joint, but their top joints are all different sizes that are designed to fit our various distilling arms . The large top openings are ideal for inserting materials for distillation. …
-
Round bottom, indented Morton Type, three neck flask. 500ml and 1L sizes have angled side necks while larger sizes feature vertical necks. Available in heavy wall. Indents enhance agitation during stirring.
-
SYNTHWARE Schlenk Storage Tubes with High Vacuum Valves
Kemtech AmericaSYNTHWARE Schlenk storage tube with a high vacuum valve. The valve has a PTFE O-ring at the tip and a PTFE wiper to protect the O-rings on the shaft. Valve is used to control liquid or gas flow into the vessel.
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
VITLAB, PFA Round Bottom Flasks
BrandTech®These corrosion- and leach-resistant flasks are excellent for rotary evaporation and distillation of high-purity chemicals. They are manufactured from PFA (a perfluoroalkoxy polymer) for excellent resistance to heat and chemical contamination, as well as smooth surfaces that greatly simplify…
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Flask, European Style
Ace GlassEuropean style, tapered walls with shallow bottom for more efficient magnetic or mechanical half-moon shaped paddle stirring. Supplied with center neck, two side necks. Available with 1 additional #7 Ace-Thred or 2 additional #7 Ace-Threds complete wit
-
4 Neck Reaction Vessel Covers
SP Wilmad-LabGlassFeaturing a center neck and three side necks with full length outer Standard Taper joints that are 120° apart, these borosilicate glass reaction vessel lids have a conical flange. Bottom flange ID is 4" and ground for a leak-proof fit with a reaction flask. For use with reaction vessels…
-
Lower half of flask has a jacket permitting heating or cooling of the contents with fluid from a constant temperature bath. The unique design of the Chem-Drain valve incorporates a PTFE plunger that allows the contents of the flask to drain directly through the bore of the plunger. When closed,…
-
Glassblowers Flask Blanks, Round Bottom
ChemglassBlanks for fabrication of single or multi-neck round bottom flasks. NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
With three necks and PTFE plug (5mm bore on 5000mL, 4mm bore on all other sizes) stopcock outlet. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. For stopcock plugs, see 8224. For heating mantle, see 12039
-
Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.
-
Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum.
-
Reaction Flask, Removable Stopcock
Ace GlassWith 4mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. Stopcock is separated from lower section by 28/15 joint. Neck opening is standard 10.2cm (4"). For joint clamp, order 7669-12. Use 6496 Cl
-
Glassblowers Flask Blanks, Recovery
ChemglassBlanks for fabrication of recovery flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
SYNTHWARE round bottom two neck reaction flask with standard taper outer joints and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.
-
Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with
-
Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and 20º angled side necks.
-
Stainless Steel McCarter Reaction Clamps
SP Wilmad-LabGlassUsed to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…
-
SYNTHWARE Modified Schlenk Flasks with Teflon® Stopcocks
Kemtech AmericaSYNTHWARE modified Schlenk flask with a standard taper outer joint and a 2mm bore PTFE stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.
-
Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and vertical side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.
-
Instatherm Reaction Flask and Head
Ace GlassRugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…
-
Rugged cylindrical jacketed reaction flask with Duran, flat, ground flange and o-ring groove. Various bottom outlet options are available (see details below). For use with 6517 quick release clamp. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints or with…
-
Coupling, Reaction Flask
Ace GlassKF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Round bottom, HEAVY WALL two neck flask with standard taper outer joints on both the center neck and vertical side neck.
-
Kuderna-Danish Flasks
ChemglassLower body of flask has a hemispherical shape to afford continuous flow of heavier fractions to concentrator tube during reflux. Top joint is a 24/40 outer while the lower joint is a 19/22 inner. Available with and without hooks on the lower 19/22 inner joint.
-
CELLine Adhere
Argos TechnologiesCELLine Flasks are ideal for monoclonal antibodies and expressed recombinant cellular protein production. Viable in vitro alternative to using, standard cell culture or tissue culture products or mouse ascites. Bioreactors utilize innovative membrane technology to separate the cell cultivation area…
-
Flask Reaction, Hi-Vac Valve NO-AIR
Ace GlassRound bottom borosilicate glass flask with standard taper center neck and a 0-4 Hi-Vac valve for precise control. Flask is ideal for simple NO-AIR and vacuum applications. Outlet arm is 8MM and can be fitted with a rubber septa for insertion of samples or additives via syringe.
-
Cylindrical Reaction Vessels with O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.
-
European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. With standard taper outer joints on center and side necks.