Flasks

Evaporating Flasks, Flasks

Compare Tool

Select up to 3 products

All Products

Flasks Evaporating Flasks

1 - 19 of 19
Sort
View
Show
  • SYNTHWARE Recovery Flasks

    Kemtech America

    SYNTHWARE recovery/evaporating, heavy wall, single neck flask with a standard taper outer joint. Desined for easy recovery of reaction products and for use with rotary evaporators. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • Recovery Flasks, Heavy Wall, with Square Joint Bead and Plastic Safety Coating

    Kontes

    KimCote® plastic-coated single neck flask with a outer joint designed for easy recovery of reaction products. Total contents are accessible with a spatula or policeman. Lower portion fits standard heating mantles. Even wall thickness and minimum runout make these flasks ideal for use with…

  • Kuderna-Danish Evaporative Concentrator

    Ace Glass

    For concentration of materials in volatile solvents. Combines rapidity, simplicity and quantitative efficiency including minimization of entrainment escape and transfer losses. Available in 250ml, 500ml, 1L flasks, with a 19/22 inner joint on bottom of flask, 24/40 on top. Choice of Snyder or…

  • Flask, Heidolph Laborota

    Ace Glass

    Large receiver/evaporator flasks for use with Heidolph 20L rotary evaporators. Flasks are fabricated from blanks selected for balance and quality with carefully welded necks to provent "rotational whip". Receiver flask has a polished 40/25 joint, side neck is a GL-18 thread with solid cap. Bottom…

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    Replacement evaporator flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Safety coated.

  • RE71 Receiving Flask

    Yamato

  • Flask, Rotary Evaporator, Large

    Ace Glass

    Rotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…

  • Evaporator Flask for Kuderna Danish Concentrator

    Kimble

    500mL Flask, 24/40 Top, 19/22 Bottom

  • Flask, Receiving, Rotary Evaporator

    Ace Glass

    Borosilicate glass receiving flask for all large scale rotary evaporators. Available in safety coated or plain glass. Side neck includes a SVL thread vent cap. Bottom inner ball joint includes CAPFE o-ring. Dark amber coated glass version is also available.

  • Flask, Recovery, Rotary Evaporator, Indents

    Ace Glass

    Replacement drying flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Available plain or safety coated.

  • Receiving Flask, Single Neck, Safety Coated

    Ace Glass

    Replacement flask for Buchi rotary evaporators. Round bottom flasks with a 35/20 single neck and safety coating.

  • Flask, Receiving, Rotary Evaporator

    Ace Glass

    Graduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.

  • SYNTHWARE Evaporation Flasks

    Kemtech America

    SYNTHWARE modified evaporation single neck flask with a standard taper outer joint. Low profile design sits upright on bench and also provides for easy product access with a spatula. Flask shape is excellent for the controlled evaporation of foaming solvents such as toluene or xylene on a rotary evaporator.

  • PYREX® Rotary Evaporator Trap with Standard Taper Inner and Outer Joints

    Corning

    These PYREX® traps are used in rotary evaporators. They have a round body with upper and lower stems. The lower stem has a Standard Taper inner joint at the bottom and extends upward inside the body. The closed top of this stem has two side openings. The upper stem has a Standard Taper outer joint.

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights. Microscale versions, codes -43

  • Flask, Rotary Evaporator/Freeze Drying

    Ace Glass

    Dual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head

  • Flask, Recovery, Rotary Evaporator

    Ace Glass

    A multipurpose, round bottom flask with a single neck and sloping side wall. Designed for use as a recovery flask with rotary evaporators. Heavy wall product family members feature approximately 30% heavier wall weights.

  • Flask, Rotary Evaporator, Large, Indented

    Ace Glass

    These flasks are also referred to as drying flasks. They are particularly suited to the drying of powdered samples as the baffles or indents provide superior mixing over plain wall flasks. X-Large flanges, common on R220 units, are 149.5mmod,118.8mmid and 21mm thick. See our 6702-300 for a o-ring…

  • Flask, Rotary Evaporator, Receiving, Jacketed

    Ace Glass

    New design jacketed receiving flask. Fits all rotary evaporators. Outer jacket has 28/15 o-ring ball joints to seal to chiller hoses. Has an SVL thread vent cap on side joint. Bottom DN25 ball joint has CAPFE o-ring. Jacket inlet and outlet ball joints have FETFE o-rings.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.