Advantec MFS Lab Filtration Products
-
Quantitative Ashless Filter Paper
Advantec MFSAdvantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and…
-
Nylon Membrane Filters
Advantec MFSBroad chemical compatibility Negligible extractables Strong and heat resistant Nylon is a very strong, heat resistant membrane manufactured by impregnating a polyester web with the nylon polymer. Several uniques properties of Nylon make this polymer universally accepted in the…
-
• 3mm, 13mm, 25mm, 50mm • 0.10µm to 1.20µm • Minimal sample hold-up • High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters…
-
Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Chemically Resistant PFA In-Line Filter Holders
Advantec MFSFilter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…
-
Cellulose Acetate (CA) Membrane Filters
Advantec MFSLow protein binding Low aqueous extractables Advantec Cellulose Acetate (CA) membrane filters are low protein binding and ideally suited for applications such as diagnostic cytology and receptor binding studies. Cellulose Acetate's hydrophilic nature and it's low absorptive…
-
Polypropylene In-Line Filter Holder
Advantec MFSThermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Qualitative Filter Paper
Advantec MFSAdvantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…
-
Available pore sizes: 0.45µm and 0.80µm Color: Black or Green Surface: Gridded Packaging: Individually Wrapped and with or without Absorbent Pad. Pleated band for dispensers available. Advantec Mixed Cellulose Esters (MCE) colored membranes…
-
Composite filters ideal for sampling airborne particulates
-
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…
-
Hydrophobic PTFE Membrane Filters
Advantec MFSOptional support backing for improved handling Filter corrosive solvents Sterile venting Protect pumps and machinery from aqueous aerosols PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose…
-
Glass Fiber Filters, High Wet Strength
Advantec MFSAdvantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Organic binder gives these filters higher wet strength and lower fiber release compared to binder-free grades. Thermostable to 120°C. Recommended for high pressure filtration, applications requiring wet…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Stainless Steel Gas In-Line Filter Holders
Advantec MFSThreaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…
-
Stainless Steel Syringe Filter Holders
Advantec MFSre-usable thereby eliminating waste using disposable units use a variety of membranes that may not be availabe in disposable units These 13mm and 25mm type 304 stainless steel syringe holders are economical and re-usable thereby reducing waste. Luer-lock fittings are compatible with…
-
Sanitary Pressure Filter Holders, Stainless Steel
Advantec MFSThreadless Sanitary Connections 90mm, 142mm, 293mm Filter Diameters Available in Type 304ss and 316ss Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough…
-
Polysulfone Vacuum Filter Holders
Advantec MFS47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…
-
Large Stainless Steel Pressure Filter Holders
Advantec MFS90mm, 142mm, and 293mm filter diameters Available in type 304ss or 316ss Large Stainless Steel Pressure Filter Holders are offered in various sizes for batch type laboratory filtration or continuous filtration operations using disc media. Advantec holders have been designed to minimizes…
-
High Pressure In-Line Filter Holder, Stainless Steel
Advantec MFSHigh-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…
-
Open-Face Aerosol Filter Holder
Advantec MFSThis 47mm aerosol filter holder is open-face for environmental monitoring or sampling of open atmosphere air and gases. Use for particulate or bacterial analysis. Thermoplastic polymer Polypropylene (PP) construction makes this holder durable and compatible with a wide range of chemical…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Opticlear MCE Membrane Filters for Air Monitoring
Advantec MFSAdvantec developed the Opticlear Mixed Cellulose Esters (MCE) membrane filters for airborne asbestos monitoring. Opticlear MCE offers superior optical clarity in which to view particles compared to standard MCE. Clears completely, providing an optimal background for accurate particle…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…
-
PTFE Depth Filters
Advantec MFSPure PTFE (Polytetrafluoroethylene) fibers are sintered to create a unique depth-type filter. These PTFE filters offer superior handling and minimal fiber slough-off compared to glass and quartz filters. Naturally hydrophobic, the media will separate aqueous from non-aqueous phases of mixtures.…