Filters

Compare Tool

Select up to 3 products

1 - 32 of 57
Sort
View
Show

Ahlstrom

  • SLAA025NB

    EMD Millipore

    This 25 mm syringe filter with a Mixed Cellulose Esters membrane, for non-sterile filtration, has a 0.8 µm pore size used in clarifying water, buffers, reconstituted antibiotics, ampouled drugs, bacterial toxins. Non-sterile Polyvinyl Chloride (PVC) housing Color Code: Clear…

  • SLGV033RB

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Color Code: Yellow Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

  • Millex-GP Syringe Filter Unit, .45µm, polyethersulfone, 33 mm, gamma sterilized

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic Polyethersulfone (PES) membrane. The larger filter surface area increases flow rate and throughput Millipore Express (PES) membranes provide a unique combination of speed and six times less protein binding…

  • SLHV033RS

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Millex filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), which means…

  • SLGV004SL

    EMD Millipore

    A 4 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Lowest protein binding sterilization/clarification of biological solutions Female Luer-Lok™ inlet and male Luer slip outlet, stepped Gamma irradiation sterilized Polyester housing…

  • SLHV013SL

    EMD Millipore

    A 13 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. These syringe filters are designed for clarification and prefiltration of protein solutions, tissue culture media, buffers and additives Manufactured in a controlled environment for…

  • Millex® Syringe Filter Units with Durapore (PVDF) Membranes

    EMD Millipore

    Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…

  • Millex® Syringe Filter Units with Nylon Membranes

    EMD Millipore

    Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…

  • SLGP033RB

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

  • SLGPM33RS

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

  • SLLGC13NL

    EMD Millipore

    This 13 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in clarification of aqueous & mild organic solutions for ion chromatography. Disposable syringe-operated filter units certified for ion chromatography sample…

  • Millex-HP Syringe Filter Unit, 0.45 µm, polyethersulfone, 33 mm, gamma…

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 250. Low Protein Binding Sterilization of tissue culture media, protein solutions or aqueous solutions

  • Millex® Syringe Filter Units with Hydrophilic PTFE Membranes

    EMD Millipore

    Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…

  • SLGVM33RS

    EMD Millipore

    33 mm Medical Millex Filter Units A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than 0.22 μm from aqueous solutions. 33 mm…

  • Hydrophilic PVDF Sterivex-GV Filter Units, Gamma Irradiated

    EMD Millipore

    Sterivex filter units work with syringes, peristaltic pumps or pressure vessels. They eliminate the risk of contamination associated with decanting or pipetting. ?? Sterivex units are designed to dispense into virtually any storage container. The devices are available with different outlet…

  • SLAP02550

    EMD Millipore

    This 25 mm syringe filter with a Glass Fiber membrane, for non-sterile filtration, has a AP20 µm pore size used in Prefiltration of heavily contaminated solutions. Filter unit with PVC housing Non-sterile Comes in a pack of 50

  • SLHA033SS

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.45 µm pore size Mixed Cellulose Esters membrane. Color Code: Blue Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Ethylene oxide

  • SLHVM25NS

    EMD Millipore

    This 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents Non-sterile

  • SLGV033RS

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), allowing you to…

  • SLFGR04NL

    EMD Millipore

    These 0.2µm syringe filters are designed for particle removal and preparation of organic solvents and similar solutions prior to chromatography analysis or other instrument analysis. Syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration 4 mm Millex filters are…

  • Millex® Syringe Filter Units with PES Membranes

    EMD Millipore

    Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…

  • SLHV033NK

    EMD Millipore

    This 33 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in preparation of protein-containing solutions prior to chromatography or other instrument analyses. Color Code: Yellow Diameter: 33mm Pore Size: 0.45um …

  • SLGVS25US

    EMD Millipore

    A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophobic PVDF membrane. Comes in a pack of 50

  • SLAA033SB

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.8 µm pore size Mixed Cellulose Esters membrane. Ideal for clarification and prefiltration water, buffers, reconstituted antibiotics, ampouled drugs, bacterial toxins, antiseptic and allergenic preparations Modified acrylic housing …

  • SLVV033RS

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.1 µm pore size hydrophilic PVDF membrane. Lowest protein binding sterilization/clarification of biological solutions Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Color Code: Yellow Sterilization: Gamma irradiation …

  • SLVVM33RS

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.1 µm pore size hydrophilic PVDF membrane. Designed for sterilizing protein solutions, tissue culture media, buffers and additives Feature a Millipore Durapore® PVDF membrane and are the lowest protein-binding syringe filters…

  • SLGV013SL

    EMD Millipore

    A 13 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Designed for sterilizing protein solutions, tissue culture media, buffers and additives Each unit is tested during the manufacturing process to ensure both membrane and housing integrity …

  • SLGP033RK

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.22 µm pore size Polyethersulfone membrane. Filters have a maximum housing pressure of 10.5 bar (150 psig), which means you can filter solutions faster than before Millex-GP filters feature Millipore Express (PES) membrane, which…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.