Compare Tool

Select up to 3 products

All Products

Filters Syringe Filters

1 - 32 of 195


  • Syringe Filters

    Celltreat Scientific

    CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a…

  • Target HPLC Syringe Filters

    National Scientific

    Non-sterile, sample prep membrane filters 7 membrane types Female Luer-Lock inlet, male Luer-slip outlet Solvent resistant polypropylene housings PES, GMF, Polypropylene and Cellulose Acetate membranes are certified for Ion Chromatography The polypropylene housings with all Target syringe…

  • Syringe Type Membrane Filters

    Thermo Scientific Nalgene

    Membrane filters enclosed in plastic housing with female Luer-Lok fitting on inlet for attachment to standard Luer-Lok-tip syringes. Male Luer-slip tip on outlet accepts standard needles. Usable for pressure or vacuum applications. Effective filtration area is 3.8 cm 2 . Offered in a choice of…

  • Plastic Syringe Filters


    FREE SAMPLES! Download the form in the Additional Info tab to request yours. Corning® syringe filters are 100% integrity tested and are certified non-pyrogenic and non-cytotoxic and are manufactured in accordance with ISO 9002 standards.  A variety of membranes are available to meet…

  • 25 mm GD/X Syringe Filters

    GE Healthcare

    Designed to facilitate manual filtration of viscous samples greater than 10 mL Wide range of membrane materials Polypropylene housing Model 4620K17 uses GMF-150 as its filter media. GMF-150 is a combination of two glass microfiber filters in one. Made from 100% borosilicate…

  • Sterile and Standard Replacement Filters


    Dual Membrane Self-Locking Filter The Dual Membrane Self-Locking Filter for Pipet-Aids® eliminates the possibility of cross-contamination due to over-pipetting. This unique protective filter which incorporates both 0.8µm hydrophilic and 0.8µm hydrophobic membranes to prevent further use once…

  • Sterile Syringe Filters

    Thermo Scientific Nalgene

    Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and…

  • Syringe Filters and 50mm Units, Sterile - MCE, CA, NY, PES, PTFE

    Advantec MFS

    •  3mm, 13mm, 25mm, 50mm •  0.10µm to 1.20µm •  Minimal sample hold-up •  High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters…

  • Puradisc™ 25 Syringe Filters

    GE Healthcare

    Quick and efficient sample filtration HPLC sample preparation Sterile isolation Autoclavable at 121°C Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for maximum sample recovery. Applications include HPLC aqueous…

  • Acrodisc® Syringe Filters

    Pall Life Sciences

    These syringe filters offer a choice of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for…

  • Cameo Polyethersulfone Syringe Filters

    GVS Life Sciences

    Ideal for applications where maximum sample recovery is essential Available with or without prefilter Gamma irradiation pre-sterilized Individually blister-packed Applications include tissue culture media preparation; sterile filtration and clarification of biological fluids; probe…

  • Puradisc 25 Syringe Filter, 0.45mm Nylon

    GE Healthcare

    Puradisc Syringe Filters combine premium quality and economy. They are well suited for quick, efficient filtration of samples up to 100 ml volume. Standard inlet and outlet luer connectors. Sterile option for critical applications. Choice of filter sizes (4 mm, 13 mm, or 30 mm) to…

  • Acrodisc® Syringe Filters with Supor® Membrane

    Pall Life Sciences

    High Flow Rates with Low Protein Binding Superior flow rates and higher throughputs than competitive devices Low protein binding to minimize sample loss Pre-sterilized products are sterilized by gamma irradiation to eliminate potential contamination by EtO residuals A range of…

  • Nonsterile PTFE Syringe Filters


    Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they…

  • Syringe Filters with Luer Lock Inlet


    Luer lock inlet offers leak-tight syringe connection Variety of filter types, porosities, and diameters Color coded for easy identification Rugged polypropylene housing Autoclavable to 121°C for 15 minutes Cellulose Acetate, Nylon, PES, PVDF—hydrophilic applications …

  • 25mm Syringe Filters

    J.G. Finneran

    Finneran 25mm Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

  • Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, gamma…

    EMD Millipore

    A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic Polyethersulfone (PES) membrane. The larger filter surface area increases flow rate and throughput Millipore Express (PES) membranes provide a unique combination of speed and six times less protein binding…

  • GD / X 25 Syringe Filter, 0.45mm Glass Microfibre

    GE Healthcare

    The GD/X range is specifically designed for filtration of high particulate loaded samples. 13 mm devices for samples up to 10 ml and 25 mm devices for samples greater than 10 ml Processes three to seven times more sample volume. Requires less hand pressure, even with the most…

  • Cameo Acetateplus Syringe Filters

    GVS Life Sciences

    Well-suited for a variety of applications requiring maximum sample recovery Cellulose acetate filter Eliminates possibility of "popping" the filter Designed to sterilize and remove particulates from proteinaceous samples. Due to extremely low holdup volume and the negligible…

  • Syringe Filters, MCE, PVDF, PTFE, Nylon, and PES

    Argos Technologies

    These Syringe Filters are ideal for filtering culture media and organic solvents in a wide range of applications. All items are tested for filter efficiency and housing integrity. Filter housing is manufactured and tested to withstand pressures of up to 75 PSI (5.1 Bar) Membrane materials include…

  • Whatman™ 25mm GD/XP Syringe Filters

    GE Healthcare

    The Whatman 25mm GD/XP Syringe Filters are designed to prepare and enhance the inorganic ion analysis of hard-to-filter samples greater than 10 mL. They are available in a wide variety of filter choices with a polypropylene housing and utilize advanced construction methods and design features. …

  • EZFlow® Syringe Filters

    Foxx Life Sciences

    EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene housing…

  • Syringe Filter: Nylon

    Graphic Controls

    A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: PA…

  • TITAN2® 30mm Syringe Filters

    Thermo Scientific Sun SRi

    Banded polypropylene housing ensures lab safety preventing the housing from bursting Color-coded housing allows for easy identification of membrane Most 30mm filters have a 1 micron glass pre-filter For sample volumes of 2mL to 100mL Retention volume < 115µL Maximum…

  • Filter, Acrodisc 0.2um 25mm


    For filtration of dilute biological fluids. Sterilized by gamma irradiation to eliminate potential contamination by EtO residuals. Inlet/Outlet connections: 13/25 mm: Female Luer-Lok inlet, standard male slip luer outlet Pore size: 0.2 µm Diameter: 25mm

  • Puradisc™ Syringe Filters

    GE Healthcare

    Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer) and outlet (male luer) connections. Options include a sterile, medical-grade blister pack for critical applications and a special tube tip outlet that allows the sample to be accurately…

  • Puradisc Syringe Filters

    GE Healthcare

    Puradisc™ syringe filters combine premium quality and economy. They are ideal for the quick, efficient filtration of samples up to 100 ml volume. Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer lock) and outlet (male luer)…

  • Polydisc TF, 0.1mm

    GE Healthcare

    Autoclavable (multiple times) Lightweight: Avoids the collapsing of tubing that can be caused by heavy filter devices Chemical-resistant housing Biosafe Integrity-testable (bubble point or water breakthrough pressure in situ methods) Hydrophobic PTFE membrane Solvent-resistant…

  • Non-Sterile Syringe Filters

    Thermo Scientific Nalgene

    Non-sterile syringe filters for filtration, clarification or particle removal from buffers, reagents, DMSO, HPLC/GC solvents. SFCA – Use for immunological samples and biological fluids CA – Ideal for buffers, aqueous reagents and solutions, including EIA and ELISA samples …

  • Cameo Teflon Syringe Filters

    GVS Life Sciences

    Designed to filter the most aggressive solvents, acids and base samples Naturally hydrophobic TefSep Teflon membrane filter Pure polypropylene housing Autoclavable Cameo F syringe filters are ideal for the following applications: filtering aggressive solvents, acids and bases; filtering…

  • Syringe Filter: Regenerated Cellulose

    Graphic Controls

    A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: RC…

  • ThermoFinnigan AS-800 & AS2000


Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.