Lab Evaporators & Concentrators
Lab evaporators are available in various forms, such as rotary evaporators, speedvacs, and spray dryers.
Centrifuge concentrators carry excellent control and automation features, which create precise and consistent evaporation conditions. This also reduces the potential for user error.
Features of lab concentrators include precise temperature control features to provide evaporation solutions on heat-sensitive materials and can be crucial during thermally sensitive applications.
Lab evaporators can reduce any time required to reduce the time needed for sample concentration to save time during applications.
Additionally, lab concentrators facilitate solvent recovery, reduce the requirement for chemical disposal, and contribute to more efficient and environmentally friendly laboratory practices.
-
64 Position MULTIVAP® Nitrogen Evaporators
OrganomationThe MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…
-
The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included…
-
Savant™ SpeedVac™ SPD1030 Integrated Vacuum Concentrator Systems
Thermo ScientificThermo Scientific™ Savant™ SpeedVac™ SPD1030 and SPD2030 Vacuum Concentrators are fully integrated systems that combine concentrator, refrigerated cold trap, diaphragm pump and vacuum gauge in a single, compact unit. Convenience and Flexibility in two capacity ranges The…
-
Savant™ SpeedVac™ Vacuum Concentrator & Kit
Thermo ScientificSamples are precious and so is time. Thermo Scientific Savant SpeedVac vacuum concentrators, refrigerated vapor traps and pumps use state-of-the-art centrifugation, vacuum and heat technologies for removing solvents and concentrating samples while maintaining sample integrity. Choose from any of…
-
Rotary Evaporators Accessories - Flasks
IKA WorksThomas Nos. 1203D21 through 1203D26 The flask is made of high quality borosilicate glass, coated.
-
MiniVap® BlowDown Evaporator
PorvairThe MiniVap® is designed for low usage R&D departments where low numbers of individual plates or vials need drying. The MiniVap® is easy to operate and maintain. Can be used with any ANSI/SLAS 96-well plate. Compact footprint - fits all standard fume cupboards.
-
Bump Traps, Fritted
ChemglassTrap has an extra coarse fritted disc sealed between the lower inner and top outer joint to prevent contents of the flask from entering into the condenser in the event of bumping. All traps have a 24/40 top outer joint and the listed size of the lower inner joint.
-
The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…
-
RE202 ROTARY EVAPORATOR SET
YamatoMarket leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. This mini-rotary evaporator is designed with slide jack mechanism for…
-
Concentrator Tubes
ChemglassGraduated concentrator tubes for use with Kuderna-Danish evaporative set-ups. Tube can be stoppered for storage. Overall height is 100mm for both the 4 and 10mL, and 170mm for the 25mL. Available with and without hooks.
-
Replacement Vapor tubes compatible with Buchi rotary evaporators. Thread is made for use with standard Combi-Clip. Available in the listed sizes. NOT SUPPLIED WITH COMBI-CLIP. COMPATIBLE WITH BUCHI ROTARY EVAPORATORS, R114, R124 AND R144 MODELS.
-
A variety of accessories are available for use with Buchi evaporators
-
Thomas No. 1203C93 Vertical intensive condenser with double jacket and distributor for particularly efficient condensation. The solvent to be distilled can be continuously fed in at the distributor using the PTFE inlet tube. Thomas No. 1203C94 Vertical intensive condenser with double jacket…
-
The S-EVAP-KD® solvent evaporator combines standard Kuderna-Danish concentration procedures with a unique rotary water bath and manifold, increasing sample throughput and conserving bench space. The instrument comes in 5, 8, and 10 position models. The S-EVAP-KD instruments are available in two…
-
The BUCHI accessory is suitable for use with Rotavapor® or Multivapor™ evaporator unit models or with Sepacore® flash system models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.
-
CentriVap® Complete™ Concentrator
LabconcoCentriVap Complete. All-in-one vacuum concentrator. Includes -50° Cold Trap, Diaphragm Pump, Rotor and CentriZap (allows sample viewing while run is in progress). Plug and play unit. Heat boost and acid resistant models available. Holds up to 100 12-13 mm tubes or 40 microcentrifuge tubes.…
-
RV 10 Rotary Evaporators with Glassware
IKA WorksThe newly developed product line from IKA® in ergonomic, compact design with innovative functions to improve operating results. Rotary evaporators with integrated heating bath HB 10 basic (3 litre) inc. space saving vertical glassware (1 litre). Heating bath with adjustable safety…
-
Elliptical Bump Trap
ChemglassRotary evaporator bump trap is used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping”. Unique elliptical shape provides large trap volume while decreasing the overall length…
-
Vacufuge Concentrator
EppendorfConcentrates DNA/RNA, nucleotides, proteins and other samples quickly 1,400 rpm; 240 x g fixed rotational speed Compact footprint Motorless drive and sealed chamber Quiet operation even with pump on Narrow, 13" width saves valuable bench space. Three evaporation modes…
-
6-Port Tray Dryer Manifold
Labconco6-Port Tray Dryer Manifold. Six valves provide the flexibility to connect flasks and other freeze dry glassware to the Freeze Dry System with Stoppering or Bulk Tray Dryer. Valves accommodate either 1/2" or 3/4" flask adapters. Mounts on support stand included with the Tray Dryer.
-
Buchi Spider Evaporator
BuchiSpider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.
-
Vapor Duct Tube, Rotary Evaporator
Ace GlassRotary evaporator vapor duct tubes. Precision machined to fit model R220 evaporators. Available in either borosilicate glass or 316 stainless steel.
-
12 Position N-EVAP® Nitrogen Evaporators
OrganomationThe 12 Position N-EVAP® nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying…
-
Vapor Tube/Trap Adapter
ChemglassVapor tube/bump trap adapter is designed to be used with the Büchi® R-200/205 rotary evaporators. This adapter combines a vapor tube adapter and a bump trap. Tapered sidewalls permit continuous washing with condensed solvent, while preventing vapor cooling points along the path of the…
-
-
RE212 ROTARY EVAPORATOR SET
YamatoStandard rotary evaporator designed with vacuum controller (REV models) and a slide jack mechanism for convenient height adjustment. Set includes either a water or oil bath and a glassware set A with diagonal condenser or glassware set B with vertical condenser. Market leader in rotation speed…
-
Buchi Bump Trap STJ
BuchiPlaced between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.
-
Sample Concentrator
Techne (Cole-Parmer)Fast efficient sample concentration Suitable for all tube configurations Compatible with Stuart three block heaters only A sample concentrator is a fast and convenient way of concentrating multiple samples in a block heater at once. Utilising a simple gas delivery system the sample…
-
Buchi Steam Tube, Rotary Evaporator
Ace GlassReplacement glass steam tube for Buchi rotary evaporators using the C or CR assemblies.
-
100 Position MULTIVAP® Nitrogen Evaporators
OrganomationThe MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…
-
LBV2 Benchtop CO2 Extractor
Ousia LabsThe LBV2 uses cold liquid CO2 to extract pure aromas, flavors, natural ingredients directly from many different botanical sources. An ideal tool for the following possible applications: Quality Assurance Testing, Research and Development, and Small Batch Production. Main features and benefits…
-
24 Position N-EVAP® Nitrogen Evaporators
OrganomationThe 24 Position N-EVAP® is Organomation’s most adaptable evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can…