The MaGELin Western Transfer System provides the user with a complete system for the rapid transfer of protein or peptide samples or nucleic acids separated by mini polyacrylamide gels to 8cm x 10cm or 10cm x 10cm membranes. The unit accommodates two cassette sandwiches for simultaneous…

Gel Size: 22 x 20 cm Buffer volume: 550ml each chamber Designed for high resolution DNA or protein separations. It is ideal for mapping purposes or for blotting applications.

The GB-3210 is a 15cm (wide) x 10cm (long) UVT gel casting tray for use in the JSB-302 Double-Wide Mini Gel-O Submarine system Ideal for saving agarose when shorter gel runs are sufficient This Gel Bed mates with the CS-3210 casting fixture for pouring agarose gels Constructed of…

Gel Size: 18 x 16 cm Buffer volume: 1L This double slab Vertical System allows two gels to be run simultaneously under identical buffer conditions in an 18 x 16cm format. A soft silicone sponge gasket and notched inner plate ensure a perfect seal and prevent leaking. The system uses a…

IBI’s GB-9615 is a 23.5cm (wide) x 15cm (long) UV transmittant Gel Bed for use in the JSB-96 Ultra-Wide Mini Gel-O Submarine system. Ideal for saving agarose when shorter gel runs are sufficient. This Gel Bed mates with the CS-9615 casting fixture for pouring agarose gels. The GB-9615 is…

IBI's CS-3210 Casting Fixture Tray is an accessory for JSB-302 Double-Wide Mini Gel-O Submarine system. It's built to hold and seal the GB-3210 - 15cm (wide) x 10cm (long) Gel Bed, during the pouring of agarose gels This fixture seals both ends of the gel bed and once the agarose…

The JSB-30 is a 7.5cm x 10cm mini gel in a . horizontal format that will accommodate up . to 18 samples per run. The ideal unit for PCR, . fragment analysis or recombinant screening. Constructed of heavy-duty 1/2" cast acrylic . for years of dependable service. The JSB-30 also provides the user…

Well Width: 4.0mm Sample Volume per mm Gel Thickness: 6.0ul The CSD-1527, 1.5mm x 27 tooth comb is compatible with the JSB-302 Double-Wide Mini Gel-O Submarine system. This comb requires the use of the CH-302 comb holder for use in the JSB-302 system and is included with the purchase of…

Gel Size: 10cm(w) x 15cm(l) Buffer volume: 500ml The MP1015 is the ideal multi-purpose gel box for both extended high resolution, linear runs, and economical quick screens. The MP1015 contains buffer recirculation ports for long runs requiring recirculation. The MP1015 is constructed of…

The IBI Blot Washer system provides an economical way to automate your western blotting procedures while reducing background issues. The pump/control unit coupled with the 4L wash and waste reservoirs provide automated dispensing and aspiration of western blot reagents. The IBI Blot Washer system…

Gel Size: 43cm x 36cm Buffer volume: 530 ml Overall height: 48 cm Unit footprint: 49 x 22 cm The IBI STS-45i sequencing unit has a complete list of features that has made it a favorite in laboratories worldwide. Featuring easy turn knobs that are designed for ease of…

IBI's Semi-Dry Blotters are electrophoretic devices designed for fast, efficient, and economical transfer of proteins, DNA, or RNA from polyacrylamide or agarose gels onto a solid membrane support. These membranes can be visualized by staining or other immunological methods.

Gel Size: 25cm(W) x 25cm(L) Buffer volume: 1500ml This high throughput system is designed to complete analysis of up to 200 samples from microtiter plates and is ideal for running all types of precast gels. The large format can run gels in less than 30 minutes. This…

The IBI "Lab-Pal" has been designed with the teaching lab in mind. The IB50000 utilizes two glass slides, measuring 2" x 3", for casting the agarose. The small glass slide format is ideal for minimizing agarose use while still being an excellent teaching tool for students just…

Gel Size: 7cm(w) x 10cm(l) Buffer volume: 375ml Designed for quick screening and rapid, linear separation of nucleic acids. The QS710 (IBI No. IB51000 ) requires minimal set-up and provides excellent band resolution and consistent lane-to-lane mobility for accurate results. A versatile system,…

The JSB-96 is designed for quick-screening a large number of samples while utilizing a limited amount of agarose (100ml). It is ideal for for PCR RFLP analysis or plasmid screening. The JSB-96 microtiter plate format can run all samples as well as standards and blanks in under 90 minutes. The…

Well Width: 5.8mm Sample Volume per mm Gel Thickness: 8.7ul The CSD-1516, 1.5mm x 16 tooth comb is compatible with the JSB-302 Double-Wide Mini Gel-O Submarine system. This comb requires the use of the CH-302 comb holder for use in the JSB-302 system. These combs are press-cut from…

IBI MAXI FlexTubes are typically used for the extraction of proteins, RNA, DNA, or oligonucleotides (>20nt) from polyacrylamide, agarose, and or any other gel matrix in a running buffer. They are also used for dialysis or buffer change of small volumes (0.1-3ml), preparation of protein samples…

The IBI MaGELin IB94300 allows for rapid analysis of protein and nucleic acid samples in an 10cm x 10cm pre-cast polyacrylamide gel format. Analysis can be completed two to three times faster than is possible with conventional 16cm gels while maintaining comparable resolution. This system has been…

Gel Size: 20cm(W) x 25cm(L) Buffer volume: 1200ml The IB56000 HR2025 is a high resolution system ideal for separation of nucleic acids in agarose gels. It is also designed for rapid screening of PCR fragments, RFLP analysis or plasmid screening, field inversion, genomic DNA separations and…

IBI’s CS-9615 is a Casting Fixture built to hold and seal the GB-9615, 23.5cm (wide) x 15cm (long) Gel Bed, during the pouring of agarose gels. This fixture seals both ends of the gel bed and once the agarose has cooled, the gel bed can be easily removed. The CS-9615 is constructed of…

The IB57020 is a UVT casting tray designed for use in the IB57000 (HR2525 Horizontal Electrophoresis System). It is constructed of OP-1 grade cast acrylic to allow the passage of UV light during the viewing the elecrophoresis gel run. This tray produces a gel measuring 25x25cm, and has 4 equal…

The IBI anti-body staining chamber is simple and easy-to-use. It will save your lab valuable time and money by simplifying your procedures and reducing the amount of anti-body solution required during blotting. The IBI Immunoblotter does not require a shaking or rocking platform during use. It is…

The Jordan JSB-302 utilizes a wider format than the traditional mini-submarine electrophoresis system. The JSB-302 Double-Wide can process a large number of samples and is ideal for PCR, fragment analysis or recombinant screening. The JSB-302 can run up to 36 samples in less than 30 minutes! …

IBI MIDI FlexTubes are typically used for the extraction of proteins, RNA, DNA, or oligonucleotides (>20nt) from polyacrylamide, agarose, and or any other gel matrix in a running buffer. They are also used for dialysis or buffer change of small volumes (50-800µl), preparation of protein…

The IBI "Lab-Pal" has been designed with the teaching lab in mind. The IB50000 utilizes two glass slides, measuring 2" x 3", for casting the agarose. The small glass slide format is ideal for minimizing agarose use while still being an excellent teaching tool for students just learning about the…

IBI MINI FlexTubes are typically used for the extraction of proteins, RNA, DNA, or oligonucleotides (>20nt) from polyacrylamide, agarose, and or any other gel matrix in a running buffer. They are also used for dialysis or buffer exchange of small volumes (10-250µl), preparation of protein…

The MaGELin Universal Protein system is designed to accommodate numerous gels in 10 x 10cm pre-cast and 10 x 10cm hand-cast. Includes the following: Buffer Tank Gel capture device Vented lid Power cords Buffer dam 2-place casting system Three sets of 10 x 10cm glass slides Two sets of…