Conductivity Electrodes

Compare Tool

Select up to 3 products

Sort
View
Show
  • InLab® Conductivity Cells for Bench Meters

    Mettler Toledo

    Ions in Motion InLab 731: A 4-pole conductivity probe with integrated temperature sensor and attached cable. Ideal for general measurements in aqueous media. Nominal cell constant: 0.57/cm. InLab 731-2m: A 4-pole conductivity probe with integrated temperature sensor and attached…

  • Orion DuraProbe 4 Electrode Conductivity Cells

    Thermo Scientific Orion

    Wide conductivity range For lab and field applications Rugged epoxy/graphite MiniDIN connector DuraProbe 4-electrode cells provide the highest accuracy for demanding laboratory or field applications. The 4-electrode design compensates for electrode fouling, cable and connector…

  • InLab® Conductivity Cells for Portable Meters

    Mettler Toledo

    Everywhere you Measure InLab 738: A 4-pole conductivity probe with integrated temperature sensor and attached 1.8m cable. Recommended for general measurements in the field or factory. Nominal cell constant: 0.57/cm. InLab 738-10m: A 4-pole conductivity probe with integrated…

  • ExStik® II Conductivity/TDS/Salinity Meter

    Extech

    Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value Large 3-1/2 digit (2000…

  • IntelliCAL™ CDC401 Standard Conductivity Probe

    Hach

    IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The standard version is available with a 3 or 1 m cable and is intended for laboratory use. The CDC401 is ideal for measuring electrical conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater,…

  • Conductivity Tetracon 325

    WTW

    The TetraCon® 325 4-electrode system sets the standard for professional conductivity measurements. When compared to conventional 2-electrode conductivity cell, the TetraCon® cells offer a high degree of precision, wider measuring range and minimal immersion depth needed for measuring.…

  • Orion 2 Electrode Conductivity Cells

    Thermo Scientific Orion

    The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

  • WTW Conductivity Cells

    WTW

    WTW offers decades of expertise in high quality, rugged conductivity cell technology, and now the new IDS conductivity cells build upon this proven technology including the automatic transfer of the cell constant feature to eliminate operation errors. Two models are available to cover the entire…

  • Digital Contacting Conductivity Sensors

    Hach

    Ultimate accuracy from ultra-pure to high conductivity applications. Nominal Cell Constant (K) = 1.0, 3/4 inch NPT Kynar (PVDF) Compression Fitting, 7m (23 ft) Digital Cable, Titanium Electrode High Performance Design Resistivity and Conductivity Measurement Capability Versatile…

  • Conductivity Tetracon 325-6

    WTW

    Conductivity electrode for field conductivity and salinity measurements. 4-electrode conductivity cell with built-in temperature probe, 19.8 ft (6 m) cable and waterproof plug Highly precise measurements Robust unbreakable epoxy body Cell constant K = 0.475 cm -1

  • KUP-L-WELD® II Thermocouple Welder

    Burrell

    The Burrell KUP-L-WELD® II welder is a complete, easy-to-use, self-contained unit for the instantaneous welding of thermocouples. The KUP-L-WELD® II is recommended for welding 30- to 14-gauge constantan, platinum, platinum/rhodium, and iron constantan. Simply plug the unit's electric cord into a…

  • Orion 4 Cell Conductivity, 12mm Body, 3M Cabel

    Thermo Scientific Orion

    Virtually eliminate fringe field interference errors with the advanced Thermo Scientific™ Orion™ DuraProbe™ 4-Electrode Conductivity Cells. Durable and extremely accurate under a wide range of conditions. 8-pin Mini-DIN 4 electrode graphite cell Rugged epoxy body …

  • Orion™ Lead Electrode

    Thermo Scientific Orion

    The Thermo Scientific Orion 9482BN Half-Cell Lead Electrode measures lead ions in aqueous solutions quickly, simply, accurately, and economically. Free-flowing Sure-Flow™ junction assures stable, drift-free potentials When conventional electrode junctions clog, the Sure-Flow™…

  • Repl. Conductivity/TDS Probe for 850039

    Sper Scientific

  • Conductivity Cells

    Sartorius

    Note: Conductivity cells have multi-pin DIN connectors, range dependent on meter.

  • Inlab 605 Ism

    Mettler Toledo

    The InLab® 605-ISM DO sensor incorporates polarographic dissolved oxygen determination technology. Produces high accuracy and reproducibility Designed for use with METTLER TOLEDO portable meter SevenGo Duo pro™ Membrane is protected by a steel mesh and the shaft is made out…

  • IntelliCAL™ MTC301 Standard Refillable ORP Electrode

    Hach

    IntelliCAL™ MTC301 is a standard digital, combination oxidation reduction potential (ORP/Redox) probe with a refillable reference and built-in temperature sensor. The standard version is available with a 1 or 3 meter cable and is intended for laboratory use. The MTC301 is ideal for measuring…

  • Pt 61 Metal Combination Electrode

    Lab Synergy

    Metal combination electrode, Glass shaft, platinum junction, electrolyte KCl 3 mol/l, Silamid®-reference system, sensor platinum pin 1 mm Ø, plug head, length 170 mm, 12 mm Ø, -5...+100 °C

  • NTC 30 kOhm Temperature Probe

    Mettler Toledo

  • Conductivity Electrodes

    Ohaus

    Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

  • Conductivity Electrodes

    Ohaus

    Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

  • Orion 3 Electrode Conductivity Cells

    Thermo Scientific Orion

    Rugged epoxy/stainless steel with removable guard. 2.5mm phono Jack connector.

  • AgCl 62 Metal Combination Electrode

    Lab Synergy

    Metal combination electrode for halogenide titrations, Glass shaft, platinum junction, electrolyte KNO3 2 mol/l + KCl 0.001 mol/l, Ag/AgCl-reference system, sensor silver cap 4 mm Ø, chlorinated, plug head, length 120 mm, 12 mm Ø, -5...+100 °C.

  • Orion Conductivity 4 Cell 6M Cable

    Thermo Scientific Orion

    DuraProbe Conductivity Cells are durable and extremely accurate under a wide range of conditions Designed for high accuracy under demanding field and plant conditions Compensates for electrode fouling, cable/connector resistance and polarization errors A choice of glass/platinum, epoxy/graphite…

  • Replacement RTD Probe for 800043

    Sper Scientific

  • LF 513 T Conductivity Cell

    SI Analytics

    Conductivity cell with fixed cable, 2 pole cell, plastic shaft, 1m cable with 8 pole plug, sensor 2 platinum rings, cell constant 1.0 cm-1, temp.-sensor NTC 30 kOhm, length 120mm, 12 mm Ø, -5...+80°C

  • DMi141-SC Plug & Play Combined Silver Ring Electrode

    Mettler Toledo

    Combined silver ring electrode for argentometric titrations. Titrations of halides, sulfides, hydrogen sulfide, mercaptans and cyanides in aqueous medium, examples: Salt content (rock salt, NaCl) in ketchup, food, vegetable juices Sulphide content of green and black liquor in the pulp…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.